[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Wheezy boot stops, leaving machine unreachable



I've been a experiencing this problem for a couple of months but haven't been able to track it down. I've got a workaround which unfortunately requires physically connecting a keyboard and monitor, so I have to be there, which is a nuisance.

The system hangs when it has brought up the network, although I can't connect remotely unless I manually start ssh. I can get access to the machine if I do SysRq-K, which terminates all the processes in the current virtual console. I can then go back and restart the ones I need. You'll see this the dmesg log below.

I do this with the single-user (rescue) boot mode so after logging in and restarting the processes, I can exit and have it complete the boot process.

There are 2 USB devices plugged in - an external HD and a printer. as well as an APC UPS plugged into the serial port. Video, etc, is all the main board.

I notice a message complaining about no IOMMU (at 0.0000) then later it mentions setting it up. The last time I was out I didn't see a BIOS setting to turn it on, but I was down with the flu at the time and didn't take a good look (there was something about putting the aperture above or below 4G, so I did try switching that setting). Would this cause a lockup?

There are some problems from 3:00 to 28:00 which may be related to either the USB HD or a new WD/Black drive I recently install (long after the boot problem manifested) to change from RAID 5 to RAID 6. Then the boot continues normally until 51.608074], after which it sits forever or until I execute the SAK.

Any ideas on what I can look for?


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.63-2+deb7u2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3cb5a34c-b052-468e-8186-e043d29dfc85 ro single
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[    0.000000]  BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bff60000 (usable)
[    0.000000]  BIOS-e820: 00000000bff60000 - 00000000bff78000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bff78000 - 00000000bffc0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bffc0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M5A88-M, BIOS 0801    11/18/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000042f000000 aka 17136M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000bff60000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bff60000 page 4k
[    0.000000] kernel direct mapping tables up to bff60000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000042f000000
[    0.000000]  0100000000 - 0400000000 page 1G
[    0.000000]  0400000000 - 042f000000 page 2M
[    0.000000] kernel direct mapping tables up to 42f000000 @ bff5e000-bff60000
[    0.000000] RAMDISK: 040f0000 - 04bc8000
[    0.000000] ACPI: RSDP 00000000000fb630 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bff60100 00054 (v01 111811 XSDT1359 20111118 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bff60290 000F4 (v03 111811 FACP1359 20111118 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bff60460 0EFE1 (v01  A1874 A1874001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bff78000 00040
[    0.000000] ACPI: APIC 00000000bff60390 0008C (v01 111811 APIC1359 20111118 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bff60420 0003C (v01 111811 OEMMCFG  20111118 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bff78040 00072 (v01 111811 OEMB1359 20111118 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bff6f8b0 00038 (v01 111811 OEMHPET  20111118 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bff6f8f0 00B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000042f000000
[    0.000000] Initmem setup node 0 0000000000000000-000000042f000000
[    0.000000]   NODE_DATA [000000042effb000 - 000000042effffff]
[    0.000000]  [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041ea00000-ffff88042c7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0042f000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000bff60
[    0.000000]     0: 0x00100000 -> 0x0042f000
[    0.000000] On node 0 totalpages: 4124394
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3917 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 767896 pages, LIFO batch:31
[    0.000000]   Normal zone: 45640 pages used for memmap
[    0.000000]   Normal zone: 3292600 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bff60000 - 00000000bff78000
[    0.000000] PM: Registered nosave memory: 00000000bff78000 - 00000000bffc0000
[    0.000000] PM: Registered nosave memory: 00000000bffc0000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000ffa00000
[    0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3fa00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042ec00000 s78848 r8192 d23552 u262144
[    0.000000] pcpu-alloc: s78848 r8192 d23552 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4064413
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=3cb5a34c-b052-468e-8186-e043d29dfc85 ro single
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Your BIOS doesn't leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[    0.000000] Memory: 16118160k/17547264k available (3432k kernel code, 1049688k absent, 379416k reserved, 3306k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3599.495 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7198.99 BogoMIPS (lpj=14397980)
[    0.004061] pid_max: default: 32768 minimum: 301
[    0.004126] Security Framework initialized
[    0.004156] AppArmor: AppArmor disabled by boot time parameter
[    0.005118] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.010723] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012538] Mount-cache hash table entries: 256
[    0.012654] Initializing cgroup subsys cpuacct
[    0.012685] Initializing cgroup subsys memory
[    0.012721] Initializing cgroup subsys devices
[    0.012751] Initializing cgroup subsys freezer
[    0.012780] Initializing cgroup subsys net_cls
[    0.012809] Initializing cgroup subsys blkio
[    0.012841] Initializing cgroup subsys perf_event
[    0.012890] tseg: 0000000000
[    0.012899] CPU: Physical Processor ID: 0
[    0.012927] CPU: Processor Core ID: 0
[    0.012956] mce: CPU supports 7 MCE banks
[    0.013269] ACPI: Core revision 20110623
[    0.020370] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061596] CPU0: AMD FX(tm)-4100 Quad-Core Processor             stepping 02
[    0.064003] Performance Events: AMD Family 15h PMU driver.
[    0.064003] ... version:                0
[    0.064003] ... bit width:              48
[    0.064003] ... generic registers:      6
[    0.064003] ... value mask:             0000ffffffffffff
[    0.064003] ... max period:             00007fffffffffff
[    0.064003] ... fixed-purpose events:   0
[    0.064003] ... event mask:             000000000000003f
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] Booting Node   0, Processors  #1
[    0.064003] smpboot cpu 1: start_ip = 95000
[    0.152030] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152164]  #2
[    0.152191] smpboot cpu 2: start_ip = 95000
[    0.244027] NMI watchdog enabled, takes one hw-pmu counter.
[    0.244134]  #3
[    0.244160] smpboot cpu 3: start_ip = 95000
[    0.336033] NMI watchdog enabled, takes one hw-pmu counter.
[    0.336077] Brought up 4 CPUs
[    0.336106] Total of 4 processors activated (28797.57 BogoMIPS).
[    0.340160] devtmpfs: initialized
[    0.345375] PM: Registering ACPI NVS region at bff78000 (294912 bytes)
[    0.345375] print_constraints: dummy:
[    0.345375] NET: Registered protocol family 16
[    0.345375] Extended Config Space enabled on 1 nodes
[    0.345375] ACPI: bus type pci registered
[    0.345375] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.345375] PCI: not using MMCONFIG
[    0.345375] PCI: Using configuration type 1 for base access
[    0.345375] PCI: Using configuration type 1 for extended access
[    0.345375] bio: create slab <bio-0> at 0
[    0.345375] ACPI: Added _OSI(Module Device)
[    0.345375] ACPI: Added _OSI(Processor Device)
[    0.345375] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.345375] ACPI: Added _OSI(Processor Aggregator Device)
[    0.348048] ACPI: EC: Look up EC in DSDT
[    0.349101] ACPI: Executed 3 blocks of module-level executable AML code
[    0.508713] ACPI: Interpreter enabled
[    0.508745] ACPI: (supports S0 S1 S3 S4 S5)
[    0.508918] ACPI: Using IOAPIC for interrupt routing
[    0.508963] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.510811] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.526270] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.526400] ACPI: No dock devices found.
[    0.526429] HEST: Table not found.
[    0.526459] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.526649] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.526852] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.526882] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.526912] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.526943] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.526975] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.527006] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[    0.527049] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[    0.527098] pci 0000:00:01.0: [1043:9602] type 1 class 0x000604
[    0.527138] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
[    0.527171] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.527187] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[    0.527220] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.527245] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.527262] pci 0000:00:11.0: reg 10: [io  0xc000-0xc007]
[    0.527270] pci 0000:00:11.0: reg 14: [io  0xb000-0xb003]
[    0.527279] pci 0000:00:11.0: reg 18: [io  0xa000-0xa007]
[    0.527287] pci 0000:00:11.0: reg 1c: [io  0x9000-0x9003]
[    0.527295] pci 0000:00:11.0: reg 20: [io  0x8000-0x800f]
[    0.527303] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
[    0.527357] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.527369] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
[    0.527432] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.527448] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
[    0.527520] pci 0000:00:12.2: supports D1 D2
[    0.527522] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.527543] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.527554] pci 0000:00:13.0: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
[    0.527617] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.527633] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
[    0.527705] pci 0000:00:13.2: supports D1 D2
[    0.527706] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.527727] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.527796] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.527814] pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
[    0.527872] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.527887] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.527954] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.527993] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[    0.528005] pci 0000:00:14.5: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
[    0.528082] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[    0.528095] pci 0000:00:16.0: reg 10: [mem 0xfe8f3000-0xfe8f3fff]
[    0.528159] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[    0.528175] pci 0000:00:16.2: reg 10: [mem 0xfe8ff000-0xfe8ff0ff]
[    0.528247] pci 0000:00:16.2: supports D1 D2
[    0.528248] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.528268] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[    0.528285] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[    0.528299] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[    0.528314] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[    0.528331] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[    0.528345] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[    0.528386] pci 0000:01:05.0: [1002:9715] type 0 class 0x000300
[    0.528394] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.528398] pci 0000:01:05.0: reg 14: [io  0xd000-0xd0ff]
[    0.528402] pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
[    0.528411] pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff]
[    0.528428] pci 0000:01:05.0: supports D1 D2
[    0.528438] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
[    0.528445] pci 0000:01:05.1: reg 10: [mem 0xfeae8000-0xfeaebfff]
[    0.528474] pci 0000:01:05.1: supports D1 D2
[    0.528506] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.528537] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.528539] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.528542] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.528580] pci 0000:02:00.0: [1b21:1042] type 0 class 0x000c03
[    0.528597] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
[    0.528684] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.536047] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[    0.536079] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.536124] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    0.536136] pci 0000:03:00.0: reg 10: [io  0xe800-0xe8ff]
[    0.536156] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.536169] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[    0.536223] pci 0000:03:00.0: supports D1 D2
[    0.536224] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.544053] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.544085] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.544090] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.544145] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[    0.544181] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.544183] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.544184] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.544186] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.544188] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.544190] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.544203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.544380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.544418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[    0.544448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.544483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.544603]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.544764]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.550601] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[    0.550876] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
[    0.551154] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
[    0.551430] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15)
[    0.551669] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.551949] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.552242] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.552523] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.552837] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.552837] vgaarb: loaded
[    0.552837] vgaarb: bridge control possible 0000:01:05.0
[    0.552837] PCI: Using ACPI for IRQ routing
[    0.560486] PCI: pci_cache_line_size set to 64 bytes
[    0.560550] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[    0.560552] reserve RAM buffer: 00000000bff60000 - 00000000bfffffff
[    0.560554] reserve RAM buffer: 000000042f000000 - 000000042fffffff
[    0.560634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.560763] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.562824] Switching to clocksource hpet
[    0.562868] pnp: PnP ACPI init
[    0.562868] ACPI: bus type pnp registered
[    0.562868] pnp 00:00: [bus 00-ff]
[    0.562868] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.562868] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.562868] pnp 00:00: [io  0x0d00-0xffff window]
[    0.562868] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.562868] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.562868] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.562868] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.562868] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.562868] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.562868] pnp 00:01: [mem 0xc0000000-0xcfffffff]
[    0.562868] system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.562868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.562868] pnp 00:02: [dma 4]
[    0.562868] pnp 00:02: [io  0x0000-0x000f]
[    0.562868] pnp 00:02: [io  0x0081-0x0083]
[    0.562868] pnp 00:02: [io  0x0087]
[    0.562868] pnp 00:02: [io  0x0089-0x008b]
[    0.562868] pnp 00:02: [io  0x008f]
[    0.562868] pnp 00:02: [io  0x00c0-0x00df]
[    0.562868] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.562868] pnp 00:03: [io  0x0070-0x0071]
[    0.562868] pnp 00:03: [irq 8]
[    0.562868] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.562868] pnp 00:04: [io  0x0061]
[    0.562868] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.562868] pnp 00:05: [io  0x00f0-0x00ff]
[    0.562868] pnp 00:05: [irq 13]
[    0.562868] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.562868] pnp 00:06: [io  0x0378-0x037f]
[    0.562868] pnp 00:06: [irq 7]
[    0.562868] pnp 00:06: [dma 0 disabled]
[    0.562868] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.562868] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[    0.562892] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.562928] pnp 00:08: [io  0x0060]
[    0.562930] pnp 00:08: [io  0x0064]
[    0.562934] pnp 00:08: [irq 1]
[    0.562963] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.563421] pnp 00:09: [io  0x03f8-0x03ff]
[    0.563425] pnp 00:09: [irq 4]
[    0.563426] pnp 00:09: [dma 0 disabled]
[    0.563498] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.563565] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.563567] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.563608] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.563638] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.563669] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.563813] pnp 00:0b: [io  0x0010-0x001f]
[    0.563815] pnp 00:0b: [io  0x0022-0x003f]
[    0.563817] pnp 00:0b: [io  0x0062-0x0063]
[    0.563818] pnp 00:0b: [io  0x0065-0x006f]
[    0.563820] pnp 00:0b: [io  0x0072-0x007f]
[    0.563821] pnp 00:0b: [io  0x0080]
[    0.563822] pnp 00:0b: [io  0x0084-0x0086]
[    0.563824] pnp 00:0b: [io  0x0088]
[    0.563825] pnp 00:0b: [io  0x008c-0x008e]
[    0.563827] pnp 00:0b: [io  0x0090-0x009f]
[    0.563828] pnp 00:0b: [io  0x00a2-0x00bf]
[    0.563829] pnp 00:0b: [io  0x00b1]
[    0.563831] pnp 00:0b: [io  0x00e0-0x00ef]
[    0.563832] pnp 00:0b: [io  0x04d0-0x04d1]
[    0.563834] pnp 00:0b: [io  0x040b]
[    0.563835] pnp 00:0b: [io  0x04d6]
[    0.563836] pnp 00:0b: [io  0x0c00-0x0c01]
[    0.563838] pnp 00:0b: [io  0x0c14]
[    0.563839] pnp 00:0b: [io  0x0c50-0x0c51]
[    0.563841] pnp 00:0b: [io  0x0c52]
[    0.563842] pnp 00:0b: [io  0x0c6c]
[    0.563843] pnp 00:0b: [io  0x0c6f]
[    0.563845] pnp 00:0b: [io  0x0cd0-0x0cd1]
[    0.563846] pnp 00:0b: [io  0x0cd2-0x0cd3]
[    0.563848] pnp 00:0b: [io  0x0cd4-0x0cd5]
[    0.563849] pnp 00:0b: [io  0x0cd6-0x0cd7]
[    0.563850] pnp 00:0b: [io  0x0cd8-0x0cdf]
[    0.563852] pnp 00:0b: [io  0x0b00-0x0b3f]
[    0.563853] pnp 00:0b: [io  0x0800-0x089f]
[    0.563855] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
[    0.563856] pnp 00:0b: [io  0x0b00-0x0b1f]
[    0.563859] pnp 00:0b: [io  0x0b20-0x0b3f]
[    0.563860] pnp 00:0b: [io  0x0900-0x090f]
[    0.563861] pnp 00:0b: [io  0x0910-0x091f]
[    0.563863] pnp 00:0b: [io  0xfe00-0xfefe]
[    0.563864] pnp 00:0b: [io  0x0060-0x005f disabled]
[    0.563866] pnp 00:0b: [io  0x0064-0x0063 disabled]
[    0.563868] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.563870] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[    0.563871] pnp 00:0b: [mem 0xfec10000-0xfec1001f]
[    0.563873] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[    0.563874] pnp 00:0b: [mem 0xfed80000-0xfed80fff]
[    0.563876] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.563943] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.563973] system 00:0b: [io  0x040b] has been reserved
[    0.564015] system 00:0b: [io  0x04d6] has been reserved
[    0.564045] system 00:0b: [io  0x0c00-0x0c01] has been reserved
[    0.564075] system 00:0b: [io  0x0c14] has been reserved
[    0.564104] system 00:0b: [io  0x0c50-0x0c51] has been reserved
[    0.564134] system 00:0b: [io  0x0c52] has been reserved
[    0.564163] system 00:0b: [io  0x0c6c] has been reserved
[    0.564192] system 00:0b: [io  0x0c6f] has been reserved
[    0.564222] system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
[    0.564252] system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
[    0.564281] system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
[    0.564311] system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
[    0.564341] system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
[    0.564370] system 00:0b: [io  0x0b00-0x0b3f] has been reserved
[    0.564400] system 00:0b: [io  0x0800-0x089f] has been reserved
[    0.564430] system 00:0b: [io  0x0b00-0x0b1f] has been reserved
[    0.564459] system 00:0b: [io  0x0b20-0x0b3f] has been reserved
[    0.564489] system 00:0b: [io  0x0900-0x090f] has been reserved
[    0.564518] system 00:0b: [io  0x0910-0x091f] has been reserved
[    0.564548] system 00:0b: [io  0xfe00-0xfefe] has been reserved
[    0.564578] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.564608] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.564639] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.564669] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.564699] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.564871] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
[    0.564873] pnp 00:0c: [io  0x0230-0x023f]
[    0.564874] pnp 00:0c: [io  0x0290-0x029f]
[    0.564876] pnp 00:0c: [io  0x0300-0x030f]
[    0.564877] pnp 00:0c: [io  0x0a30-0x0a3f]
[    0.564918] system 00:0c: [io  0x0230-0x023f] has been reserved
[    0.564948] system 00:0c: [io  0x0290-0x029f] has been reserved
[    0.564977] system 00:0c: [io  0x0300-0x030f] has been reserved
[    0.565007] system 00:0c: [io  0x0a30-0x0a3f] has been reserved
[    0.565037] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.565077] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.565117] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.565147] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.565243] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.565245] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.565247] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.565248] pnp 00:0e: [mem 0x00100000-0xbfffffff]
[    0.565249] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[    0.565292] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.565323] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.565353] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.565383] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.565413] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.565444] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.565521] pnp: PnP ACPI: found 15 devices
[    0.565549] ACPI: ACPI bus type pnp unregistered
[    0.572507] PCI: max bus depth: 1 pci_try_num: 2
[    0.572523] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.572553] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.572583] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.572614] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.572647] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[    0.572677] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.572709] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[    0.572738] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.572770] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.572803] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.572851] pci 0000:00:07.0: setting latency timer to 64
[    0.572860] pci 0000:00:0a.0: setting latency timer to 64
[    0.572867] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.572869] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.572870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.572872] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.572873] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.572875] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.572877] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.572878] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.572880] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.572882] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.572883] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.572885] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.572887] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.572888] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.572890] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.572891] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.572893] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.572894] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.572986] NET: Registered protocol family 2
[    0.574715] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.575982] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.577718] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.577943] TCP: Hash tables configured (established 524288 bind 65536)
[    0.577973] TCP reno registered
[    0.578019] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.578117] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.578302] NET: Registered protocol family 1
[    0.578338] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.656074] pci 0000:01:05.0: Boot video device
[    1.656117] PCI: CLS 64 bytes, default 64
[    1.656157] Unpacking initramfs...
[    1.851912] Freeing initrd memory: 11104k freed
[    1.854359] PCI-DMA: Disabling AGP.
[    1.854465] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.854494] PCI-DMA: using GART IOMMU.
[    1.854524] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.858562] perf: AMD IBS detected (0x000000ff)
[    1.858762] audit: initializing netlink socket (disabled)
[    1.858798] type=2000 audit(1420726939.852:1): initialized
[    1.870820] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.872594] VFS: Disk quotas dquot_6.5.2
[    1.872653] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.872740] msgmni has been set to 31631
[    1.872955] alg: No test for stdrng (krng)
[    1.873016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.873048] io scheduler noop registered
[    1.873077] io scheduler deadline registered
[    1.873133] io scheduler cfq registered (default)
[    1.873239] pcieport 0000:00:07.0: setting latency timer to 64
[    1.873265] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
[    1.873315] pcieport 0000:00:0a.0: setting latency timer to 64
[    1.873335] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[    1.873403] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[    1.873433] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.873464] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[    1.873474] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[    1.873504] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.873534] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[    1.873548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.873592] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.873623] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.873900] ERST: Table is not found!
[    1.873928] GHES: HEST is not enabled!
[    1.874003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.894423] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.072613] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.092215] Linux agpgart interface v0.103
[    2.092330] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.092360] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.092513] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.092627] mousedev: PS/2 mouse device common for all mice
[    2.092689] rtc_cmos 00:03: RTC can wake from S4
[    2.092823] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.092873] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.092909] cpuidle: using governor ladder
[    2.092938] cpuidle: using governor menu
[    2.093120] TCP cubic registered
[    2.093229] NET: Registered protocol family 10
[    2.093654] Mobile IPv6
[    2.093682] NET: Registered protocol family 17
[    2.093713] Registering the dns_resolver key type
[    2.093852] PM: Hibernation image not present or could not be loaded.
[    2.093859] registered taskstats version 1
[    2.094860] rtc_cmos 00:03: setting system clock to 2015-01-08 14:22:20 UTC (1420726940)
[    2.094917] Initializing network drop monitor service
[    2.095876] Freeing unused kernel memory: 576k freed
[    2.096030] Write protecting the kernel read-only data: 6144k
[    2.098003] Freeing unused kernel memory: 648k freed
[    2.100174] Freeing unused kernel memory: 688k freed
[    2.109180] udevd[59]: starting version 175
[    2.110884] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.127289] usbcore: registered new interface driver usbfs
[    2.127346] usbcore: registered new interface driver hub
[    2.128796] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.128880] r8169 0000:03:00.0: setting latency timer to 64
[    2.128938] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    2.129726] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000187a000, f4:6d:04:7a:51:3b, XID 0c900800 IRQ 42
[    2.129764] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.145618] usbcore: registered new device driver usb
[    2.146051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.146126] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    2.146178] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.146218] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.146268] QUIRK: Enable AMD PLL fix
[    2.146280] ehci_hcd 0000:00:12.2: debug port 1
[    2.146340] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
[    2.151617] SCSI subsystem initialized
[    2.155105] libata version 3.00 loaded.
[    2.155872] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    2.155877] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.155919] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.156118] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.156175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.156206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.156240] usb usb1: Product: EHCI Host Controller
[    2.156271] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    2.156303] usb usb1: SerialNumber: 0000:00:12.2
[    2.156444] hub 1-0:1.0: USB hub found
[    2.156477] hub 1-0:1.0: 5 ports detected
[    2.156598] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    2.156634] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    2.156672] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.156723] ehci_hcd 0000:00:13.2: debug port 1
[    2.156765] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe8ff400
[    2.166474] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[    2.166478] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.166483] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    2.166486] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.166490] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.166558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.166590] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.167911] usb usb2: Product: xHCI Host Controller
[    2.167941] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    2.167970] usb usb2: SerialNumber: 0000:02:00.0
[    2.168060] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.168102] xHCI xhci_add_endpoint called for root hub
[    2.168104] xHCI xhci_check_bandwidth called for root hub
[    2.168131] hub 2-0:1.0: USB hub found
[    2.168166] hub 2-0:1.0: 2 ports detected
[    2.168249] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.168257] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.168311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.168344] usb usb3: Product: EHCI Host Controller
[    2.168375] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    2.168404] usb usb3: SerialNumber: 0000:00:13.2
[    2.168558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.168567] hub 3-0:1.0: USB hub found
[    2.168571] hub 3-0:1.0: 5 ports detected
[    2.168658] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    2.168681] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    2.168689] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[    2.168697] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.168722] ehci_hcd 0000:00:16.2: debug port 1
[    2.168737] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe8ff000
[    2.168876] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.168906] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.168937] usb usb4: Product: xHCI Host Controller
[    2.168966] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    2.168995] usb usb4: SerialNumber: 0000:02:00.0
[    2.169093] xHCI xhci_add_endpoint called for root hub
[    2.169094] xHCI xhci_check_bandwidth called for root hub
[    2.169117] hub 4-0:1.0: USB hub found
[    2.169150] hub 4-0:1.0: 2 ports detected
[    2.180046] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.180090] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.180120] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.180151] usb usb5: Product: EHCI Host Controller
[    2.180180] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    2.180209] usb usb5: SerialNumber: 0000:00:16.2
[    2.180334] hub 5-0:1.0: USB hub found
[    2.180366] hub 5-0:1.0: 4 ports detected
[    2.180468] ahci 0000:00:11.0: version 3.0
[    2.180591] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    2.180632] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.181288] scsi0 : ahci
[    2.181436] scsi1 : ahci
[    2.181539] scsi2 : ahci
[    2.181639] scsi3 : ahci
[    2.181737] scsi4 : ahci
[    2.181837] scsi5 : ahci
[    2.181923] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 19
[    2.181956] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 19
[    2.181988] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 19
[    2.182020] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 19
[    2.182053] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 19
[    2.182084] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 19
[    2.182161] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    2.182209] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[    2.182274] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe8fe000
[    2.244045] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.244077] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.244108] usb usb6: Product: OHCI Host Controller
[    2.244137] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.244166] usb usb6: SerialNumber: 0000:00:12.0
[    2.244296] hub 6-0:1.0: USB hub found
[    2.244333] hub 6-0:1.0: 5 ports detected
[    2.244452] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.244488] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[    2.244533] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fd000
[    2.304048] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.304079] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.304111] usb usb7: Product: OHCI Host Controller
[    2.304140] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.304169] usb usb7: SerialNumber: 0000:00:13.0
[    2.304302] hub 7-0:1.0: USB hub found
[    2.304339] hub 7-0:1.0: 5 ports detected
[    2.304435] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.304469] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.304512] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fc000
[    2.364054] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.364085] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.364117] usb usb8: Product: OHCI Host Controller
[    2.364146] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.364175] usb usb8: SerialNumber: 0000:00:14.5
[    2.364303] hub 8-0:1.0: USB hub found
[    2.364337] hub 8-0:1.0: 2 ports detected
[    2.364427] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    2.364463] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[    2.364506] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe8f3000
[    2.424040] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    2.424071] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.424102] usb usb9: Product: OHCI Host Controller
[    2.424131] usb usb9: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.424160] usb usb9: SerialNumber: 0000:00:16.0
[    2.424284] hub 9-0:1.0: USB hub found
[    2.424323] hub 9-0:1.0: 4 ports detected
[    2.472045] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.500085] ata6: SATA link down (SStatus 0 SControl 300)
[    2.500162] ata4: SATA link down (SStatus 0 SControl 300)
[    2.615349] usb 1-1: New USB device found, idVendor=0bc2, idProduct=2100
[    2.615381] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.615411] usb 1-1: Product: FreeAgent Go
[    2.615439] usb 1-1: Manufacturer: Seagate
[    2.615468] usb 1-1: SerialNumber: 2GE1N2D7
[    2.621891] Initializing USB Mass Storage driver...
[    2.622022] scsi6 : usb-storage 1-1:1.0
[    2.622106] usbcore: registered new interface driver usb-storage
[    2.622138] USB Mass Storage support registered.
[    2.672048] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.672098] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.672149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.672197] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.673329] ata5.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    2.673364] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.673402] ata3.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    2.673439] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.673477] ata1.00: ATA-8: ST500DM002-1BD142, KC44, max UDMA/133
[    2.673507] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.674834] ata5.00: configured for UDMA/133
[    2.674882] ata3.00: configured for UDMA/133
[    2.675016] ata1.00: configured for UDMA/133
[    2.675149] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC44 PQ: 0 ANSI: 5
[    2.732041] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[    2.856036] Refined TSC clocksource calibration: 3599.868 MHz.
[    2.856067] Switching to clocksource tsc
[    2.871431] usb 1-2: New USB device found, idVendor=04f9, idProduct=0045
[    2.871462] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.871493] usb 1-2: Product: HL-2240 series
[    2.871521] usb 1-2: Manufacturer: Brother
[    2.871549] usb 1-2: SerialNumber: K0J300932
[    3.622587] scsi 6:0:0:0: Direct-Access     Seagate  FreeAgent Go     102D PQ: 0 ANSI: 4
[    7.672023] ata2.00: qc timeout (cmd 0xec)
[    7.672061] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   13.204015] ata2: link is slow to respond, please be patient (ready=0)
[   17.684019] ata2: softreset failed (device not ready)
[   18.176021] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   28.176046] ata2.00: qc timeout (cmd 0xec)
[   28.176084] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   28.176115] ata2: limiting SATA link speed to 3.0 Gbps
[   28.668019] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[   28.668527] ata2.00: ATA-9: WDC WD2003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[   28.668558] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[   28.669061] ata2.00: configured for UDMA/133
[   28.669181] scsi 1:0:0:0: Direct-Access     ATA      WDC WD2003FZEX-0 01.0 PQ: 0 ANSI: 5
[   28.669371] scsi 2:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[   28.669556] scsi 4:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
[   28.674321] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   28.674357] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   28.674444] sd 0:0:0:0: [sda] Write Protect is off
[   28.674475] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.674499] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.674905] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   28.674920] sd 2:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   28.674923] sd 2:0:0:0: [sdd] 4096-byte physical blocks
[   28.674970] sd 2:0:0:0: [sdd] Write Protect is off
[   28.674973] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   28.674995] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.675237] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   28.675239] sd 4:0:0:0: [sde] 4096-byte physical blocks
[   28.675277] sd 4:0:0:0: [sde] Write Protect is off
[   28.675279] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[   28.675295] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.676482] sd 1:0:0:0: [sdc] 4096-byte physical blocks
[   28.676806] sd 1:0:0:0: [sdc] Write Protect is off
[   28.676842] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   28.676944] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.676973] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   28.677013] sd 6:0:0:0: Attached scsi generic sg1 type 0
[   28.677114] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   28.677180] sd 2:0:0:0: Attached scsi generic sg3 type 0
[   28.677245] sd 4:0:0:0: Attached scsi generic sg4 type 0
[   28.677645] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   28.679027] sd 6:0:0:0: [sdb] Write Protect is off
[   28.679058] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[   28.680272] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.681990]  sdd: sdd1 sdd2
[   28.682278] sd 2:0:0:0: [sdd] Attached SCSI disk
[   28.683430]  sde: sde1 sde2
[   28.683690] sd 4:0:0:0: [sde] Attached SCSI disk
[   28.683746]  sda: sda1 sda2
[   28.684013] sd 0:0:0:0: [sda] Attached SCSI disk
[   28.685157]  sdb: sdb1
[   28.690397] sd 6:0:0:0: [sdb] Attached SCSI disk
[   28.715582]  sdc: sdc1 sdc2
[   28.715850] sd 1:0:0:0: [sdc] Attached SCSI disk
[   29.596433] md: md0 stopped.
[   29.597626] md: bind<sdd1>
[   29.597831] md: bind<sde1>
[   29.597965] md: bind<sdc1>
[   29.598190] md: bind<sda1>
[   29.599102] md: raid1 personality registered for level 1
[   29.599322] bio: create slab <bio-1> at 1
[   29.599404] md/raid1:md0: active with 3 out of 3 mirrors
[   29.599449] md0: detected capacity change from 0 to 98553856
[   29.600687]  md0: unknown partition table
[   29.804987] md: md1 stopped.
[   29.806600] md: bind<sdd2>
[   29.807023] md: bind<sde2>
[   29.832589] md: bind<sdc2>
[   29.832793] md: bind<sda2>
[   29.900034] raid6: int64x1   1836 MB/s
[   29.968009] raid6: int64x2   2160 MB/s
[   30.036020] raid6: int64x4   2109 MB/s
[   30.104030] raid6: int64x8   2070 MB/s
[   30.172014] raid6: sse2x1    4742 MB/s
[   30.240009] raid6: sse2x2    8956 MB/s
[   30.308012] raid6: sse2x4   11351 MB/s
[   30.308041] raid6: using algorithm sse2x4 (11351 MB/s)
[   30.308221] async_tx: api initialized (async)
[   30.308372] xor: automatically using best checksumming function: generic_sse
[   30.328009]    generic_sse: 10513.000 MB/sec
[   30.328038] xor: using function: generic_sse (10513.000 MB/sec)
[   30.328893] md: raid6 personality registered for level 6
[   30.328924] md: raid5 personality registered for level 5
[   30.328954] md: raid4 personality registered for level 4
[   30.329195] md/raid:md1: device sda2 operational as raid disk 0
[   30.329227] md/raid:md1: device sdc2 operational as raid disk 3
[   30.329256] md/raid:md1: device sde2 operational as raid disk 2
[   30.329286] md/raid:md1: device sdd2 operational as raid disk 1
[   30.329554] md/raid:md1: allocated 4280kB
[   30.329605] md/raid:md1: raid level 6 active with 4 out of 4 devices, algorithm 2
[   30.329636] RAID conf printout:
[   30.329638]  --- level:6 rd:4 wd:4
[   30.329639]  disk 0, o:1, dev:sda2
[   30.329640]  disk 1, o:1, dev:sdd2
[   30.329641]  disk 2, o:1, dev:sde2
[   30.329642]  disk 3, o:1, dev:sdc2
[   30.329661] md1: detected capacity change from 0 to 1000011202560
[   30.332396]  md1: p1 p2
[   30.666033] EXT4-fs (md1p1): mounted filesystem with ordered data mode. Opts: (null)
[   31.919127] udevd[457]: starting version 175
[   32.126676] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   32.131908] parport_pc 00:06: reported by Plug and Play ACPI
[   32.131985] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   32.134306] ATK0110 ATK0110:00: EC enabled
[   32.137012] wmi: Mapper loaded
[   32.168955] input: PC Speaker as /devices/platform/pcspkr/input/input1
[   32.169675] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[   32.169710] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   32.172439] ACPI: acpi_idle registered with cpuidle
[   32.184361] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0045
[   32.184407] usbcore: registered new interface driver usblp
[   32.200085] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   32.200119] ACPI: Power Button [PWRB]
[   32.200188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   32.200222] ACPI: Power Button [PWRF]
[   32.253294] [drm] Initialized drm 1.1.0 20060810
[   32.322501] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   32.361561] [drm] radeon defaulting to kernel modesetting.
[   32.361592] [drm] radeon kernel modesetting enabled.
[   32.368310] radeon 0000:01:05.0: setting latency timer to 64
[   32.368317] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
[   32.368367] [drm] register mmio base: 0xFEAF0000
[   32.368397] [drm] register mmio size: 65536
[   32.373616] ATOM BIOS: 113
[   32.373661] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[   32.373695] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[   32.380123] [drm] Detected VRAM RAM=256M, BAR=256M
[   32.380164] [drm] RAM width 32bits DDR
[   32.380244] [TTM] Zone  kernel: Available graphics memory: 8098564 kiB
[   32.380275] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   32.380305] [TTM] Initializing pool allocator
[   32.380340] [TTM] Initializing DMA pool allocator
[   32.380387] [drm] radeon: 256M of VRAM memory ready
[   32.380421] [drm] radeon: 512M of GTT memory ready.
[   32.380465] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   32.380953] [drm] radeon: ib pool ready.
[   32.381193] EDAC MC: Ver: 2.1.0
[   32.382071] [drm] Loading RS780 Microcode
[   32.388738] MCE: In-kernel MCE decoding enabled.
[   32.389320] AMD64 EDAC driver v3.4.0
[   32.389372] EDAC amd64: DRAM ECC disabled.
[   32.389407] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   32.389408]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   32.389409]  (Note that use of the override may cause unknown side effects.)
[   32.415384] platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
[   32.423701] platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
[   32.431403] platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[   32.433636] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[   32.433728] radeon 0000:01:05.0: WB enabled
[   32.433758] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff88041acf0c00
[   32.433792] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   32.433821] [drm] Driver supports precise vblank timestamp query.
[   32.433863] [drm] radeon: irq initialized.
[   32.465711] [drm] ring test on 0 succeeded in 1 usecs
[   32.465819] [drm] ib test on ring 0 succeeded in 0 usecs
[   32.466134] [drm] Radeon Display Connectors
[   32.466170] [drm] Connector 0:
[   32.466202] [drm]   VGA
[   32.466232] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   32.466265] [drm]   Encoders:
[   32.466295] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   32.466324] [drm] Connector 1:
[   32.466353] [drm]   DVI-D
[   32.466383] [drm]   HPD1
[   32.466412] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   32.466443] [drm]   Encoders:
[   32.466472] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[   32.466520] [drm] radeon: power management initialized
[   32.482055] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   32.524567] [drm] fb mappable at 0xD0142000
[   32.524598] [drm] vram apper at 0xD0000000
[   32.524634] [drm] size 8294400
[   32.524663] [drm] fb depth is 24
[   32.524692] [drm]    pitch is 7680
[   32.524782] fbcon: radeondrmfb (fb0) is primary device
[   32.525986] Error: Driver 'pcspkr' is already registered, aborting...
[   32.545088] powernow-k8: Found 1 AMD FX(tm)-4100 Quad-Core Processor             (4 cpu cores) (version 2.20.00)
[   32.545102] powernow-k8: Core Performance Boosting: on.
[   32.545156] powernow-k8:    0 : pstate 0 (3600 MHz)
[   32.545158] powernow-k8:    1 : pstate 1 (3300 MHz)
[   32.545159] powernow-k8:    2 : pstate 2 (2500 MHz)
[   32.545160] powernow-k8:    3 : pstate 3 (1700 MHz)
[   32.545161] powernow-k8:    4 : pstate 4 (1400 MHz)
[   32.549705] Console: switching to colour frame buffer device 240x67
[   32.568302] fb0: radeondrmfb frame buffer device
[   32.568364] drm: registered panic notifier
[   32.568443] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
[   32.599559] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   32.600117] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[   33.535528] EXT4-fs (md1p1): re-mounted. Opts: (null)
[   34.350697] EXT4-fs (md1p1): re-mounted. Opts: errors=remount-ro
[   34.470376] loop: module loaded
[   37.115404] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[   37.224305] EXT4-fs (md1p2): mounted filesystem with ordered data mode. Opts: (null)
[   38.769366] r8169 0000:03:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[   38.877197] r8169 0000:03:00.0: eth0: link down
[   38.877277] r8169 0000:03:00.0: eth0: link down
[   38.881004] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.204635] r8169 0000:03:00.0: eth0: link up
[   41.208294] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   51.608074] eth0: no IPv6 routers present
[   57.643383] SysRq : SAK
[   57.647369] SAK: killed process 1945 (mount.cifs): task_session(p)==tty->session
[   57.647369] SAK: killed process 1944 (mount.cifs): task_session(p)==tty->session
[   57.647369] SAK: killed process 1943 (mount): task_session(p)==tty->session
[   57.647369] SAK: killed process 1928 (mountnfs): task_session(p)==tty->session
[   57.647369] SAK: killed process 1898 (run-parts): task_session(p)==tty->session
[   57.647369] SAK: killed process 1897 (sh): task_session(p)==tty->session
[   57.647751] SAK: killed process 1857 (ifup): task_session(p)==tty->session
[   57.647751] SAK: killed process 1849 (networking): task_session(p)==tty->session
[   57.647751] SAK: killed process 338 (startpar): task_session(p)==tty->session
[   57.647751] SAK: killed process 329 (rc): task_session(p)==tty->session
[   57.647751] SAK: killed process 328 (init): task_session(p)==tty->session
[   57.647787] SAK: killed process 328 (init): task_session(p)==tty->session
[   57.647787] SAK: killed process 329 (rc): task_session(p)==tty->session
[   57.647787] SAK: killed process 338 (startpar): task_session(p)==tty->session
[   57.647787] SAK: killed process 1849 (networking): task_session(p)==tty->session
[   57.647787] SAK: killed process 1857 (ifup): task_session(p)==tty->session
[   57.647787] SAK: killed process 1897 (sh): task_session(p)==tty->session
[   57.647787] SAK: killed process 1898 (run-parts): task_session(p)==tty->session
[   57.647787] SAK: killed process 1928 (mountnfs): task_session(p)==tty->session
[   57.647787] SAK: killed process 1943 (mount): task_session(p)==tty->session
[   57.647787] SAK: killed process 1944 (mount.cifs): task_session(p)==tty->session
[   57.647787] SAK: killed process 1945 (mount.cifs): task_session(p)==tty->session
[  115.163642] ip_tables: (C) 2000-2006 Netfilter Core Team
[  115.245608] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  115.306206] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  283.657366] ata2.00: exception Emask 0x10 SAct 0x8000000 SErr 0x280100 action 0x6 frozen
[  283.660852] ata2.00: irq_stat 0x08000000, interface fatal error
[  283.664407] ata2: SError: { UnrecovData 10B8B BadCRC }
[  283.667944] ata2.00: failed command: READ FPDMA QUEUED
[  283.671490] ata2.00: cmd 60/00:d8:00:80:90/04:00:01:00:00/40 tag 27 ncq 524288 in
[  283.671493]          res 40/00:dc:00:80:90/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[  283.678625] ata2.00: status: { DRDY }
[  283.682172] ata2: hard resetting link
[  284.176193] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  284.181280] ata2.00: configured for UDMA/133
[  284.185347] ata2: EH complete
[  512.564697] lp0: using parport0 (interrupt-driven).
[  512.577838] ppdev: user-space parallel port driver
[  519.378890] colord-sane[3132]: segfault at a9 ip 00007f29cac1c123 sp 00007fffd66e4928 error 4 in libdbus-1.so.3.7.2[7f29cac08000+45000]
[  579.886125] RPC: Registered named UNIX socket transport module.
[  579.890198] RPC: Registered udp transport module.
[  579.894337] RPC: Registered tcp transport module.
[  579.898414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  579.932561] FS-Cache: Loaded
[  579.967144] FS-Cache: Netfs 'nfs' registered for caching
[  579.982804] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).


Reply to: