|
On 04/29/2015 09:47 AM, Michael Biebl
wrote:
OK xrandr -v -q gives:Am 29.04.2015 um 18:28 schrieb Gary Roach:I just upgraded to Jessie with no problems. I use a 24" 16x9 monitor. With wheezy, there was a 1920 x 1080? mode that gave the correct aspect ratio for the 16x9 screens. Jessie seems to only have the 4x3 1600x1200 mode. All of my circles are now elipses. Is there a solution to this problem. Is there a different driver out there. I'm using the on board video card on my Intel DP55KG mother board. I am certain that I didn't have this problem with Wheezy.Does /var/log/Xorg.0.log contain any warnings or errors? I assume you use the "intel" driver? Is xserver-xorg-video-intel correctly installed? What does xrandr -q say? xrandr program version 1.4.2 xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.00* 1280x1024 0.00 1280x960 0.00 1024x768 0.00 800x600 0.00 640x480 0.00 No 1920 x ? shows up. I re-installed xserver-xorg-video-intel using Aptitude. Nothing changed. There were no warnings or errors in the Xorg.0.log but I did find the following: (I noticed that it got the screen size right, 520, 320 mm) [ 27.140] (II) VESA(0): Total Memory: 256 64KB banks (16384kB) [ 27.140] (II) VESA(0): <default monitor>: Using hsync range of 30.00-83.00 kHz [ 27.140] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-61.00 Hz [ 27.140] (II) VESA(0): <default monitor>: Using maximum pixel clock of 175.00 MHz [ 27.140] (WW) VESA(0): Unable to estimate virtual size [ 27.140] (II) VESA(0): Not using built-in mode "1920x1440" (no mode of this name) [ 27.140] (II) VESA(0): Not using built-in mode "1856x1392" (no mode of this name) [ 27.140] (II) VESA(0): Not using built-in mode "1792x1344" (no mode of this name) [ 27.140] (II) VESA(0): Not using built-in mode "1400x1050" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "1152x864" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "720x400" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "640x350" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "512x384" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) [ 27.141] (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) [ 27.141] (--) VESA(0): Virtual size is 1600x1200 (pitch 1600) [ 27.141] (**) VESA(0): *Built-in mode "1600x1200" [ 27.141] (**) VESA(0): *Built-in mode "1280x1024" [ 27.141] (**) VESA(0): *Built-in mode "1280x960" [ 27.141] (**) VESA(0): *Built-in mode "1024x768" [ 27.141] (**) VESA(0): *Built-in mode "800x600" [ 27.141] (**) VESA(0): *Built-in mode "640x480" [ 27.141] (**) VESA(0): Display dimensions: (520, 320) mm [ 27.141] (**) VESA(0): DPI set to (78, 95) [ 27.141] (**) VESA(0): Using "Shadow Framebuffer" [ 27.141] (II) Loading sub module "shadow" [ 27.141] (II) LoadModule: "shadow" [ 27.141] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 27.247] (II) Module shadow: vendor="X.Org Foundation" [ 27.247] compiled for 1.16.4, module version = 1.1.0 [ 27.247] ABI class: X.Org ANSI C Emulation, version 0.4 [ 27.247] (II) Loading sub module "fb" [ 27.247] (II) LoadModule: "fb" [ 27.247] (II) Loading /usr/lib/xorg/modules/libfb.so [ 27.324] (II) Module fb: vendor="X.Org Foundation" [ 27.324] compiled for 1.16.4, module version = 1.0.0 [ 27.324] ABI class: X.Org ANSI C Emulation, version 0.4 [ 27.324] (==) Depth 24 pixmap format is 32 bpp [ 27.324] (II) Loading sub module "int10" [ 27.324] (II) LoadModule: "int10" [ 27.324] (II) Loading /usr/lib/xorg/modules/libint10.so [ 27.324] (II) Module int10: vendor="X.Org Foundation" [ 27.324] compiled for 1.16.4, module version = 1.0.0 [ 27.324] ABI class: X.Org Video Driver, version 18.0 [ 27.324] (II) VESA(0): initializing int10 [ 27.324] (II) VESA(0): Primary V_BIOS segment is: 0xc000 [ 27.324] (II) VESA(0): VESA BIOS detected [ 27.324] (II) VESA(0): VESA VBE Version 3.0 [ 27.324] (II) VESA(0): VESA VBE Total Mem: 16384 kB [ 27.324] (II) VESA(0): VESA VBE OEM: ATI ATOMBIOS [ 27.324] (II) VESA(0): VESA VBE OEM Software Rev: 12.16 [ 27.324] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. [ 27.324] (II) VESA(0): VESA VBE OEM Product: CEDAR [ 27.324] (II) VESA(0): VESA VBE OEM Product Rev: 01.00 [ 27.324] (II) VESA(0): virtual address = 0x7f66a9821000, physical address = 0xe0000000, size = 16777216 [ 27.337] (II) VESA(0): Setting up VESA Mode 0x176 (1600x1200) [ 27.337] (II) VESA(0): VBESetVBEMode failed, mode set without customized refresh. [ 27.451] (==) VESA(0): Default visual is TrueColor [ 27.516] (==) VESA(0): Backing store enabled [ 27.531] (==) VESA(0): DPMS enabled [ 27.531] (==) RandR enabled [ 27.620] (II) SELinux: Disabled on system [ 27.621] (II) AIGLX: Screen 0 is not DRI2 capable [ 27.638] (EE) AIGLX: reverting to software rendering [ 29.297] (II) AIGLX: Loaded and initialized swrast [ 29.297] (II) GLX: Initialized DRISWRAST GL provider for screen 0 Gary R. |