firewire_ohci does not create devices in testing/jessie
Hello list,
I am having trouble using my Sony camcorder with dvgrab. It is connected using a PCMCIA Firewire Notebook
Adapter from Belkin.
This is when using Testing/Jessie installed using the installer from March 16-th, so just a few
days before the alfa release of the installer.
The problem is that the /dev/fw? devices are not created.
Why does that not happen, while the hardware seems to be recognised as shown by the logs, see below.
Also, the Sony camcorder recognizes the DV-interface when firewire cable is connected.
It all worked perfectly under debian wheezy.
Is there a better way to debug this?
Thanks in advance,
Sietse
==========================================================================================================
uname -a:
Linux Sietse-1 3.13-1-686-pae #1 SMP Debian 3.13.5-1 (2014-03-04) i686 GNU/Linux
from lspci:
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
02:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
02:06.5 Communication controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
03:00.0 FireWire (IEEE 1394): Texas Instruments Device 0024
from lsmod:
firewire_ohci 34856 0
firewire_core 51080 1 firewire_ohci
crc_itu_t 12331 1 firewire_core
from /var/log/kern
Mar 23 07:54:58 Sietse-1 kernel: [ 10.741303] firewire_ohci 0000:03:00.0: enabling device (0000 -> 0002)
(but nothing about creating a device)
Reply to: