GUI fails after upgrade from wheezy to jessie

Hi all,

I just upgraded from Debian stable (wheezy) to testing (jessie). Unfortunately, I encountered three different problems which are (in decending severity):

1. The GUI became totally unusable. After booting X is started up but in 99% of all tries it just leaves me with a blank screen. Only once the gdm3 interface came up very slowly and I was able to log in, however the hole system froze after about one minute and I had to perform a hard reset. With removing the "quiet" from kernel command line I just see that X is started (displays "OK") - no further errors reported. I managed to obtain the kernal fault trace attached to this email. This problem occurs every time and I have no clue how to fix it. Tried to add "nomodeset" to the kernel command line but no result. Additionally, the kernel fault seems to occur multiple times in a row.

I can force the kernel fault to occure with # killall Xorg gdm3 gdm-session-manager which seems to restart the whole gui (however I do not know how restarts this services). After this command I am automatically taken to terminal 7 with a running "GUI" / blank screen.

2. During boot the system hangs for quite some time with displaying the message "A start job is running for dev-disk-by\x2duuid-29d73912\x2d52ca\x2d4026\x2d8a14\x2d72c08e242b0b.device". I found this https://forum.manjaro.org/index.php?topic=5538.0 and the system continues to boot, but it is still something I would like to fix. Any ideas?

3. Do to Bug #758787 (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=758787) my apt became useless. Does anybody know of a workaround?

My system is a laptop with Intel Atom processor and an onboard Intel Graphics chip. Kernel version is 3.14-2-686-pae.

Dmesg also just gives me the report found in attachment. I could not find any helpful information in /var/log/Xorg.0.log or /var/log/Xorg.1.log neither in /var/log/syslog. Google gives no solution either...

Any help is greatly appreciated.

Yours,

Hans

Kernel failure message 1: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1094 at /build/linux-neEfbl/linux-3.14.15/drivers/gpu/drm/i915/intel_display.c:9541 check_crtc_state+0x6a8/0xdb0 [i915]() pipe state doesn't match! Modules linked in: nls_utf8 isofs cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc iptable_filter xt_owner ip_tables x_tables hid_generic joydev option huawei_cdc_ncm cdc_wdm arc4 uvcvideo videobuf2_vmalloc ath9k usb_wwan ath9k_common ath9k_hw cdc_ncm videobuf2_memops videobuf2_core usbhid usbserial hid sr_mod usbnet cdrom mii ath videodev media mac80211 snd_hda_codec_realtek psmouse snd_hda_codec_generic cfg80211 iTCO_wdt eeepc_wmi iTCO_vendor_support asus_wmi coretemp evdev serio_raw snd_hda_intel snd_hda_codec snd_hwdep i915 lpc_ich snd_pcm_oss mfd_core snd_mixer_oss snd_pcm snd_timer snd drm_kms_helper soundcore rng_core sparse_keymap rfkill wmi drm i2c_algo_bit i2c_core shpchp video battery ac button acpi_cpufreq processor loop fuse ecryptfs parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 usb_storage sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ahci libahci uhci_hcd ehci_pci ehci_hcd libata scsi_mod thermal atl1c usbcore usb_common thermal_sys CPU: 1 PID: 1094 Comm: Xorg Tainted: G W 3.14-2-686-pae #1 Debian 3.14.15-2 Hardware name: ASUSTeK Computer INC. 1005HA/1005HA, BIOS 1601 04/18/2011 00000009 c142f384 e39a1ab0 c10506ae f878b8e8 e39a1ac8 00000446 f8782450 00002545 f87298d8 f87298d8 f3e50000 f3e50648 00000000 f41f09cc c1050703 00000009 e39a1ab0 f878b8e8 e39a1ac8 f87298d8 f8782450 00002545 f878b8e8 Call Trace: [<c142f384>] ? dump_stack+0x3e/0x4e [<c10506ae>] ? warn_slowpath_common+0x7e/0xa0 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<c1050703>] ? warn_slowpath_fmt+0x33/0x40 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f8735fbc>] ? intel_modeset_check_state+0x27c/0x760 [i915] [<f873652a>] ? intel_set_mode+0x2a/0x40 [i915] [<f8736d46>] ? intel_crtc_set_config+0x726/0x900 [i915] [<f85233d3>] ? drm_mode_set_config_internal+0x43/0xb0 [drm] [<f8525cbe>] ? drm_mode_setcrtc+0xde/0x590 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<f8519486>] ? drm_ioctl+0x3a6/0x420 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<f85190e0>] ? drm_free_buffer+0x30/0x30 [drm] [<c115e5c7>] ? do_vfs_ioctl+0x307/0x500 [<c1053743>] ? do_setitimer+0x1b3/0x1f0 [<c1053893>] ? SyS_setitimer+0xb3/0xf0 [<c115fb30>] ? SyS_select+0xa0/0xc0 [<c115e818>] ? SyS_ioctl+0x58/0x80 [<c143ab46>] ? sysenter_do_call+0x12/0x12 ---[ end trace 0fe34f1e9f06a4e7 ]--- Kernel failure message 2: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1094 at /build/linux-neEfbl/linux-3.14.15/drivers/gpu/drm/i915/intel_display.c:9541 check_crtc_state+0x6a8/0xdb0 [i915]() pipe state doesn't match! Modules linked in: cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc iptable_filter xt_owner ip_tables x_tables hid_generic joydev option huawei_cdc_ncm cdc_wdm arc4 uvcvideo videobuf2_vmalloc ath9k usb_wwan ath9k_common ath9k_hw cdc_ncm videobuf2_memops videobuf2_core usbhid usbserial hid sr_mod usbnet cdrom mii ath videodev media mac80211 snd_hda_codec_realtek psmouse snd_hda_codec_generic cfg80211 iTCO_wdt eeepc_wmi iTCO_vendor_support asus_wmi coretemp evdev serio_raw snd_hda_intel snd_hda_codec snd_hwdep i915 lpc_ich snd_pcm_oss mfd_core snd_mixer_oss snd_pcm snd_timer snd drm_kms_helper soundcore rng_core sparse_keymap rfkill wmi drm i2c_algo_bit i2c_core shpchp video battery ac button acpi_cpufreq processor loop fuse ecryptfs parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 usb_storage sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ahci libahci uhci_hcd ehci_pci ehci_hcd libata scsi_mod thermal atl1c usbcore usb_common thermal_sys CPU: 1 PID: 1094 Comm: Xorg Tainted: G W 3.14-2-686-pae #1 Debian 3.14.15-2 Hardware name: ASUSTeK Computer INC. 1005HA/1005HA, BIOS 1601 04/18/2011 00000009 c142f384 e39a1ab0 c10506ae f878b8e8 e39a1ac8 00000446 f8782450 00002545 f87298d8 f87298d8 f3e50000 f3e50648 00000000 f41f09cc c1050703 00000009 e39a1ab0 f878b8e8 e39a1ac8 f87298d8 f8782450 00002545 f878b8e8 Call Trace: [<c142f384>] ? dump_stack+0x3e/0x4e [<c10506ae>] ? warn_slowpath_common+0x7e/0xa0 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<c1050703>] ? warn_slowpath_fmt+0x33/0x40 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f8735fbc>] ? intel_modeset_check_state+0x27c/0x760 [i915] [<f873652a>] ? intel_set_mode+0x2a/0x40 [i915] [<f8736d46>] ? intel_crtc_set_config+0x726/0x900 [i915] [<f85233d3>] ? drm_mode_set_config_internal+0x43/0xb0 [drm] [<f8525cbe>] ? drm_mode_setcrtc+0xde/0x590 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<f8519486>] ? drm_ioctl+0x3a6/0x420 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<c100f1af>] ? __switch_to+0x2df/0x360 [<f85190e0>] ? drm_free_buffer+0x30/0x30 [drm] [<c115e5c7>] ? do_vfs_ioctl+0x307/0x500 [<c1430af8>] ? __schedule+0x228/0x6e0 [<c115e818>] ? SyS_ioctl+0x58/0x80 [<c143ab46>] ? sysenter_do_call+0x12/0x12 ---[ end trace 0fe34f1e9f06a4e4 ]--- Kernel failure message 3: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1094 at /build/linux-neEfbl/linux-3.14.15/drivers/gpu/drm/i915/intel_display.c:9541 check_crtc_state+0x6a8/0xdb0 [i915]() pipe state doesn't match! Modules linked in: cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc iptable_filter xt_owner ip_tables x_tables hid_generic joydev option huawei_cdc_ncm cdc_wdm arc4 uvcvideo videobuf2_vmalloc ath9k usb_wwan ath9k_common ath9k_hw cdc_ncm videobuf2_memops videobuf2_core usbhid usbserial hid sr_mod usbnet cdrom mii ath videodev media mac80211 snd_hda_codec_realtek psmouse snd_hda_codec_generic cfg80211 iTCO_wdt eeepc_wmi iTCO_vendor_support asus_wmi coretemp evdev serio_raw snd_hda_intel snd_hda_codec snd_hwdep i915 lpc_ich snd_pcm_oss mfd_core snd_mixer_oss snd_pcm snd_timer snd drm_kms_helper soundcore rng_core sparse_keymap rfkill wmi drm i2c_algo_bit i2c_core shpchp video battery ac button acpi_cpufreq processor loop fuse ecryptfs parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 usb_storage sg sd_mod crc_t10dif crct10dif_generic crct10dif_common ahci libahci uhci_hcd ehci_pci ehci_hcd libata scsi_mod thermal atl1c usbcore usb_common thermal_sys CPU: 1 PID: 1094 Comm: Xorg Tainted: G W 3.14-2-686-pae #1 Debian 3.14.15-2 Hardware name: ASUSTeK Computer INC. 1005HA/1005HA, BIOS 1601 04/18/2011 00000009 c142f384 e39a1ab0 c10506ae f878b8e8 e39a1ac8 00000446 f8782450 00002545 f87298d8 f87298d8 f3e50000 f3e50648 00000000 f41f09cc c1050703 00000009 e39a1ab0 f878b8e8 e39a1ac8 f87298d8 f8782450 00002545 f878b8e8 Call Trace: [<c142f384>] ? dump_stack+0x3e/0x4e [<c10506ae>] ? warn_slowpath_common+0x7e/0xa0 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<c1050703>] ? warn_slowpath_fmt+0x33/0x40 [<f87298d8>] ? check_crtc_state+0x6a8/0xdb0 [i915] [<f8735fbc>] ? intel_modeset_check_state+0x27c/0x760 [i915] [<f873652a>] ? intel_set_mode+0x2a/0x40 [i915] [<f8736d46>] ? intel_crtc_set_config+0x726/0x900 [i915] [<f85233d3>] ? drm_mode_set_config_internal+0x43/0xb0 [drm] [<f8525cbe>] ? drm_mode_setcrtc+0xde/0x590 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<f8519486>] ? drm_ioctl+0x3a6/0x420 [drm] [<f8525be0>] ? drm_mode_setplane+0x3e0/0x3e0 [drm] [<f85190e0>] ? drm_free_buffer+0x30/0x30 [drm] [<c115e5c7>] ? do_vfs_ioctl+0x307/0x500 [<c106f9c0>] ? hrtimer_start+0x20/0x30 [<c1053743>] ? do_setitimer+0x1b3/0x1f0 [<c1053893>] ? SyS_setitimer+0xb3/0xf0 [<c115fb30>] ? SyS_select+0xa0/0xc0 [<c115e818>] ? SyS_ioctl+0x58/0x80 [<c143ab46>] ? sysenter_do_call+0x12/0x12 ---[ end trace 0fe34f1e9f06a4e3 ]---

Reply to: