Re: SMART data, should I change my HDD?
KS a écrit :
>
> So you mean that for now, even though the WHEN_FAILED column has
> Pre-fail and Old_age values, I don't have have to worry about it?
You are misreading. Pre-fail and Old_age are in a different column
(TYPE). The WHEN_FAILED column is empty.
> Second drive (I believe this needs to be replaced though):
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
> 1 Raw_Read_Error_Rate POSR-- 115 097 006 - 86103872
> 3 Spin_Up_Time PO---- 097 095 000 - 0
> 4 Start_Stop_Count -O--CK 100 100 020 - 338
> 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
> 7 Seek_Error_Rate POSR-- 087 064 030 - 522263404
> 9 Power_On_Hours -O--CK 061 061 000 - 35001
> 10 Spin_Retry_Count PO--C- 100 100 097 - 0
> 12 Power_Cycle_Count -O--CK 100 100 020 - 490
> 187 Reported_Uncorrect -O--CK 100 100 000 - 0
> 189 High_Fly_Writes -O-RCK 100 100 000 - 0
> 190 Airflow_Temperature_Cel -O---K 065 045 045 Past 35 (Min/Max
> 28/37)
This attribute reached the threshold at least once in the past, but it
does not mean that the drive was damaged and needs to be replaced.
> 194 Temperature_Celsius -O---K 035 055 000 - 35 (0 19 0 0 0)
> 195 Hardware_ECC_Recovered -O-RC- 069 052 000 - 237764232
> 197 Current_Pending_Sector -O--C- 100 100 000 - 0
> 198 Offline_Uncorrectable ----C- 100 100 000 - 0
> 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
> 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
> 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
> ||||||_ K auto-keep
> |||||__ C event count
> ||||___ R error rate
> |||____ S speed/performance
> ||_____ O updated online
> |______ P prefailure warning
Reply to: