Re: expresscard esata experiences anyone?
Hi Zenaan,
Am Freitag, 12. Juli 2013, 23:43:55 schrieb Zenaan Harkness:
> Any experiences with ExpressCard54 (or 34 for that matter) eSATA
> laptop cards someone can share?
>
> Wondering of course about linux support.
Have an Delock ExpressCard34 eSATA card here, works just fine.
martin@merkaba:~> dmesg | tail -13
[430057.190594] pci 0000:05:00.0: [1095:3531] type 00 class 0x018000
[430057.190647] pci 0000:05:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit]
[430057.190678] pci 0000:05:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit]
[430057.190698] pci 0000:05:00.0: reg 20: [io 0x0000-0x007f]
[430057.190842] pci 0000:05:00.0: supports D1 D2
[430057.192371] pci 0000:05:00.0: BAR 2: assigned [mem 0xf1c00000-0xf1c01fff
64bit]
[430057.192452] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c02000-0xf1c0207f
64bit]
[430057.192473] pci 0000:05:00.0: BAR 4: assigned [io 0x4000-0x407f]
[430057.192489] pci 0000:05:00.0: no hotplug settings from platform
[430057.192564] sata_sil24 0000:05:00.0: enabling device (0000 -> 0003)
[430057.193022] scsi12 : sata_sil24
[430057.193109] ata9: SATA max UDMA/100 host m128@0xf1c02000 port 0xf1c00000
irq 19
[430059.212685] ata9: SATA link down (SStatus 0 SControl 0)
Anything Silicon Image based should work.
Didn´t try if /etc/modules
# [Bug 35812] New: hotplug of Express Card eSATA controller in ThinkPad T520
# does not work
# https://bugzilla.kernel.org/show_bug.cgi?id=35812
acpiphp
is still needed for hotplug or whether udev loads the module automatically
now.
Ciao,
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
Reply to: