Re: can't load nvidia kernel module
> I'm guessing you are not using the Debian packages, because otherwise
> you would have:
>
> ,----[ /etc/modprobe.d/nvidia-kernel-common.conf ]
> | alias char-major-195* nvidia
> | options nvidia NVreg_DeviceFileUID=0 NVreg_DeviceFileGID=44 NVreg_DeviceFileMode=0660
> | # To enable FastWrites and Sidebus addressing, uncomment these lines
> | # options nvidia NVreg_EnableAGPSBA=1
> | # options nvidia NVreg_EnableAGPFW=1
> |
> | # see #580894
> | blacklist nouveau
> `----
I do have that file on /etc/modprobe.d/ but nouveau gets loaded
anyway. I have linux version: 3.1.0-1-amd64
That's what /var/log/dmesg says about nouveau:
[ 2.563472] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.566700] [drm] nouveau 0000:01:00.0: Detected an NV40 generation
card (0x04a100a1)
[ 2.568612] [drm] nouveau 0000:01:00.0: Attempting to load BIOS
image from PRAMIN
[ 2.650652] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 2.650660] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 2.650665] [drm] nouveau 0000:01:00.0: Bios version 05.44.a2.07
[ 2.650670] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 2.650674] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 2.650678] [drm] nouveau 0000:01:00.0: Found Display Configuration
Block version 3.0
[ 2.650684] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 2.650689] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028
[ 2.650693] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000
[ 2.650697] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0084c030
[ 2.650702] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2
[ 2.650707] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00
idx 0 tag 0xff
[ 2.650711] [drm] nouveau 0000:01:00.0: 1: 0x00002230: type 0x30
idx 1 tag 0x08
[ 2.650716] [drm] nouveau 0000:01:00.0: 2: 0x00000110: type 0x10
idx 2 tag 0xff
[ 2.650720] [drm] nouveau 0000:01:00.0: 3: 0x00000111: type 0x11
idx 3 tag 0xff
[ 2.650724] [drm] nouveau 0000:01:00.0: 4: 0x00000113: type 0x13
idx 4 tag 0xff
[ 2.650734] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0
at offset 0xDD1E
[ 2.653259] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1
at offset 0xE00C
[ 2.666387] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2
at offset 0xE546
[ 2.666409] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3
at offset 0xE6A3
[ 2.667531] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4
at offset 0xE82C
[ 2.667536] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
[ 2.667602] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[ 2.687250] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 2.687258] [drm] nouveau 0000:01:00.0: 0: memory 532MHz core
350MHz fanspeed 100%
[ 2.687272] [drm] nouveau 0000:01:00.0: c: memory 401MHz core 200MHz
[ 2.688231] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 2.688470] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 2.688474] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 2.688569] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 2.760167] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga
encoder (output 0)
[ 2.760175] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga
encoder (output 1)
[ 2.760180] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds
encoder (output 2)
[ 2.760185] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
encoder (output 3)
[ 2.948556] [drm] nouveau 0000:01:00.0: allocated 1360x768 fb:
0x49000, bo ffff88003bb67c00
[ 2.949442] fbcon: nouveaufb (fb0) is primary device
[ 2.964518] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga
encoder (output 0)
[ 2.964525] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on
CRTC 0 using output A
[ 2.967954] fb0: nouveaufb frame buffer device
[ 2.967968] [drm] Initialized nouveau 0.0.16 20090420 for
0000:01:00.0 on minor 0
Any idea why nouveau it's getting loaded anyway?
Cheers.
--
David
Reply to: