No such file or directory ...
I am having problems which I think may relate to an actually dying
disk, but I am not sure. Sometimes I have thought it is because of a
dying disk and then we have realized it wasn't.
~
I basically installed java and recursively copied the files to
another directory. 'which' and 'ls' are telling me the file is where I
put and declared it in the PATH, but the JVM doesn't find it
~
What do you think is wrong with the picture?
~
thanks
lbrtchx
~
$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
$ export JAVA_HOME="/media/sdd1/jdk/x64/jdk1.7.0_07"
$ export PATH="$JAVA_HOME"/bin:$PATH
$ echo $PATH
/media/sdd1/jdk/x64/jdk1.7.0_07/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
$ which java
/media/sdd1/jdk/x64/jdk1.7.0_07/bin/java
$ java -version
bash: /media/sdd1/jdk/x64/jdk1.7.0_07/bin/java: No such file or directory
$ ls -l /media/sdd1/jdk/x64/jdk1.7.0_07/bin/java
-rwxr-xr-x 1 knoppix knoppix 7750 Oct 15 10:30
/media/sdd1/jdk/x64/jdk1.7.0_07/bin/java
$ pwd
/media/sdd1/jdk/x64/jdk1.7.0_07/bin
$ ls -l ./java
-rwxr-xr-x 1 knoppix knoppix 7750 Oct 15 10:30 ./java
$ ./java -version
bash: ./java: No such file or directory
$ fdisk -l /dev/sdb
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000250da
Device Boot Start End Blocks Id System
/dev/sdb1 2048 140406783 70202368 83 Linux
/dev/sdb2 149000192 156301311 3650560 5 Extended
/dev/sdb3 140406784 149000191 4296704 83 Linux
/dev/sdb5 149002240 156301311 3649536 83 Linux
Partition table entries are not in disk order
$ sudo smartctl -a -d ata -T permissive /dev/sdb
smartctl 5.43 2012-05-01 r3539 [x86_64-linux-3.3.7-64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9
Device Model: ST3808110AS
Serial Number: 9LS01307
Firmware Version: 3.AAH
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Oct 15 11:16:21 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 113 075 006 Pre-fail
Always - 54997907
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 465
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail
Always - 101732850
9 Power_On_Hours 0x0032 098 098 000 Old_age
Always - 2250
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 480
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 057 050 045 Old_age
Always - 43 (Min/Max 32/43)
194 Temperature_Celsius 0x0022 043 050 000 Old_age
Always - 43 (0 20 0 0 0)
195 Hardware_ECC_Recovered 0x001a 064 046 000 Old_age
Always - 87457732
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: