[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: nvidia CK804 sound card question



On Wed, 5 Sep 2012, Darac Marjal wrote:

> On Tue, Sep 04, 2012 at 05:57:07PM -0400, Jude DaShiell wrote:
> > I just tried: modprobe snd_pcm_oss then tried echo $? and got back a 0 no 
> > other output from: modprobe snd_pcm_oss so in order to get that working I 
> > will probably have to install alsa-oss.  The oss drivers may be completely 
> > inappropriate for this card too.On Tue, 4 Sep 2012, lee wrote:
> 
> This is perfectly normal behaviour.
> 
> The GNU philosophy is, usually, to only complain in case of an error.
> Most tools will NOT output anything (extra) in case of success. If you
> get no output and the return value is 0, then the module was probed
> successfully. To confirm that, run "lsmod" to see that it's loaded; if
> it isn't, then maybe it loaded correctly and then unloaded due to an
> error (check your logs. Note that snd_pcm_oss probably won't do that,
> but some other could, I suppose).
> 
> Also note that snd_pcm_oss doesn't actually load the OSS sound system,
> it just provides a compatibility layer so that programs which don't
> speak ALSA can still use the OSS interface.
> 
> > 
> > > Jude DaShiell <jdashiel@shellworld.net> writes:
> > > 
> > > > Yes I have sound.  rexima and aumix appear unable to locate any cards 
> > > > even with several different combinations of items parsed from the 
> > > > relevant lspci line.
> > > 
> > > According to [1] (which probably applies), you might want to try
> > > something like "rexima -d /dev/mixer". Parsing strings to rexima or
> > > aumix that have been taken from the output of lspci probably isn't the
> > > right thing to do.
> > > 
> > > What exactly are you doing, and do you get any error messages?
> > > 
> > > 
> > > [1]: http://manpages.ubuntu.com/manpages/lucid/man1/rexima.1.html
> > > 
> > > 
> > > 
> > 
> > ---------------------------------------------------------------------------
> > jude <jdashiel@shellworld.net>
> > Adobe fiend for failing to Flash
> > 
> > 
> > 
> > -- 
> > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org 
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> > Archive: [🔎] alpine.BSF.2.01.1209041754100.30754@freire1.furyyjbeyq.arg">http://lists.debian.org/[🔎] alpine.BSF.2.01.1209041754100.30754@freire1.furyyjbeyq.arg
> > 
The interesting thing is before I ran that modprobe command there was no 
/dev/mixer on the system.  After I ran the modprobe command though, 
/dev/mixer must have been created and enabled.

> 

--------------------------------------------------------------------------- 
jude <jdashiel@shellworld.net> Adobe fiend for failing to Flash



Reply to: