IRQ conflict IRQ0 network card.
Hi,
I have a old PC (AMD athelon 3000+) which has an onboard network card
(gige-tg3) kernel 3.5.0 debian squeeze.
03:16.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S
[Rhine-III] (rev 86)
When I do an ifconfig eth1 up (eth0 is another external card) I get
this error
[ 408.536851] genirq: Flags mismatch irq 0. 00000080 (eth1) vs.
00015a20 (timer)
I tried to google for this but could not get any good fix information
for this issue. The card is not working as of now but was working fine
with FreeBSD kernel.
Has anyone encountered this before
I have tried hpet=none (just to score off the hpet IRQ and this card IRQ
clash)
I have tried pci=biosirq
When I load the driver these are the messages
[ 803.569255] tg3.c:v3.123 (March 21, 2012)
[ 803.631887] tg3 0000:02:00.0: eth1: Tigon3 [partno(BCM95789) rev
4101] (PCI Express) MAC address 00:30:1b:b9:d5:e3
[ 803.631895] tg3 0000:02:00.0: eth1: attached PHY is 5750
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 803.631899] tg3 0000:02:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[ 803.631903] tg3 0000:02:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
When I do a ifconfig up I get this message
[ 823.525509] genirq: Flags mismatch irq 0. 00000080 (eth1) vs.
00015a20 (timer)
IF anyone has got an experience dealing with this issue can you give me
inputs please ?
thanks
--
Bhasker C V
Secure Mails:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4D05FEEC54E47413
Reply to: