Re: SD slot read card failed.
On 07/26/2012 12:58 AM, lina wrote:
Hi,
I have a SanDisk 16GB card
(http://www.play.com/Electronics/Electronics/-/3184/2451/-/30026998/SanDisk-Ultra-16GB-SDHC-Memory-Card/Product.html),
once insert it into the slot, it showed me:
Jul 26 12:41:47 debian kernel: [94880.765117] mmc0: Resetting controller.
Jul 26 12:41:47 debian kernel: [94880.783153] mmc0: Card removed
during transfer!
Jul 26 12:41:47 debian kernel: [94880.783163] mmc0: Resetting controller.
Jul 26 12:41:47 debian kernel: [94880.787329] mmc0: error -123 whilst
initialising SD card
Jul 26 12:42:31 debian kernel: [94924.588304] sdhci: Switching to 1.8V
signalling voltage failed, retrying with S18R set to 0
Jul 26 12:42:39 debian kernel: [94932.607544] mmc0: error -110 whilst
initialising SD card
Jul 26 12:42:48 debian kernel: [94941.003529] mmc0: error -110 whilst
initialising SD card
Jul 26 12:42:48 debian kernel: [94941.831354] sdhci: Switching to 1.8V
signalling voltage failed, retrying with S18R set to 0
Jul 26 12:42:56 debian kernel: [94949.919027] mmc0: error -110 whilst
initialising SD card
Jul 26 12:43:13 debian kernel: [94966.303499] mmc0: error -110 whilst
initialising SD card
dmesg results showed me:
[94880.783163] mmc0: Resetting controller.
[94880.787329] mmc0: error -123 whilst initialising SD card
[94924.588304] sdhci: Switching to 1.8V signalling voltage failed,
retrying with S18R set to 0
[94932.607544] mmc0: error -110 whilst initialising SD card
[94941.003529] mmc0: error -110 whilst initialising SD card
[94941.831354] sdhci: Switching to 1.8V signalling voltage failed,
retrying with S18R set to 0
[94949.919027] mmc0: error -110 whilst initialising SD card
[94966.303499] mmc0: error -110 whilst initialising SD card
The card is healthy, I have a USB card reader, so no problem,
[95739.464470] usb 2-1.2: new full-speed USB device number 6 using ehci_hcd
[95739.480565] hub 2-1:1.0: unable to enumerate USB device on port 2
[95739.720215] usb 2-1.2: new high-speed USB device number 7 using ehci_hcd
[95739.813751] usb 2-1.2: New USB device found, idVendor=14cd, idProduct=125c
[95739.813761] usb 2-1.2: New USB device strings: Mfr=1, Product=3,
SerialNumber=2
[95739.813767] usb 2-1.2: Product: Mass Storage Device
[95739.813772] usb 2-1.2: Manufacturer: Generic
[95739.813776] usb 2-1.2: SerialNumber: 125C20100726
[95739.814603] scsi4 : usb-storage 2-1.2:1.0
[95740.812191] scsi 4:0:0:0: Direct-Access Mass Storage Device
PQ: 0 ANSI: 0 CCS
[95740.816024] sd 4:0:0:0: [sdb] 31116288 512-byte logical blocks:
(15.9 GB/14.8 GiB)
[95740.816702] sd 4:0:0:0: [sdb] Write Protect is off
[95740.816712] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[95740.817368] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.817381] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.820973] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.820985] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.822154] sdb: sdb1
[95740.824325] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.824328] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.824330] sd 4:0:0:0: [sdb] Attached SCSI removable disk
I wonder, is it possible to read without the card reader.
Thanks with best regards,
You can get an external card reading adapter that plugs into a
usb port. I have one called "TOPRAM. I don't remember where I got it,
but there are probably a slew of them available, At any rate, it works
great. I took some pictures of my dog with a Panasonic Lumix camera,
put the SD card from the camera into the TOPRAM adapter, and it
read perfectly in PCLOS.I opened the picture files in GIMP. (The
TOPRAM adapter says usb2.0, but it seems to be plenty fast enough
for this purpose.)
I don't know if it's necessary, but I clicked on the adapter/card combo
in Dolphin before doing anything else. I understand that this mounts
whatever you click on. It also lets you figure out what /dev it may be
called, or you can copy the files to a local pictures directory and then
address them from there. This is actually what I did, since I wanted to
save the pictures anyway. If one of them turns out to be a clunker,
you can always delete it.
--doug
--
Blessed are the peacekeepers...for they shall be shot at from both sides. --A.M. Greeley
Reply to: