Re: ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
On 06/10/2012 04:55 AM, Camaleón wrote:
... (is a DIY or you bought the system already assembled)?
I bought parts and put them together.
On 06/10/2012 04:55 AM, Camaleón wrote:
> dmesg | grep "ata3.00" will tell what's attached to the SATA 3 port.
The Intel 520 SSD.
On 06/10/2012 04:55 AM, Camaleón wrote:
... it can be a bad or poor sata cable or loose
connection. I'd first try to replace it and see how it goes.
On 06/10/2012 07:23 AM, Curt wrote:
> According to this wiki
>
http://lime-technology.com/wiki/index.php/The_Analysis_of_Drive_Issues#Drive_Interface_Issues
> it could be a number of things, including:
> # inadequate power supply
> # device and controller don't like each other on 3Gbps
> # cable too long or flaky connector (especially with eSATA cables or
> genders or backplanes)
> # faulty controller or drive
> etc...
I was using a StarTech SATDOCK2520 mobile dock. I swapped cables and
the problems persisted. I installed the SSD internally and the problems
went away. :-)
Thanks!
David
Reply to: