Re: Install Squeeze with firmware
On Sat, 26 May 2012 20:57:41 +0200, Antispammbox-debian wrote:
> Hi all
> The problem is this:
> Experimental1 with iso file with firmware write on usb:
> syslog-stick-firmware.txt > do not ask me choice for firmware netcard.
> After 20 minutes that starting installing, do not anything.
> Do not ask request firmeware
Use the expert installer an manually load the firmware from the main
> The log is this:
> May 25 08:55:39 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing
> May 25 08:55:40 kernel: [ 46.330056] tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin
> May 25 08:55:40 kernel: [ 46.332393] tg3 0000:02:0e.0: eth0: Failed to load firmware "tigon/tg3_tso5.bin"
> May 25 08:55:40 kernel: [ 46.332397] tg3 0000:02:0e.0: eth0: TSO capability disabled
> May 25 08:55:40 kernel: [ 46.469480] ADDRCONF(NETDEV_UP): eth0: link is not ready
> May 25 08:55:40 kernel: [ 46.904401] tg3 0000:02:0e.0: PME# enabled
> May 25 08:55:40 kernel: [ 46.904423] pci 0000:00:1e.0: wake-up capability enabled by ACPI
> May 25 08:55:40 kernel: [ 46.977236] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> May 25 08:55:41 check-missing-firmware: missing firmware files (tigon/tg3_tso5.bin) for tg3
> May 25 08:55:49 check-missing-firmware: installing firmware package /cdrom/firmware/firmware-linux-nonfree_0.28+squeeze1_all.deb
You are stuck at the same point. Can't you just omit the network
configuration and finish the installation by installing from the
local media source?