Re: Install Squeeze with firmware
Hi all
The problem is this:
Experimental1 with iso file with firmware write on usb:
syslog-stick-firmware.txt > do not ask me choice for firmware
netcard.
After 20 minutes that starting installing, do not anything.
Do not ask request firmeware
The log is this:
Log for Experimental1: syslog-stick-firmware.txt
/*
May 25 08:54:56 syslogd started: BusyBox v1.17.1
May 25 08:54:56 kernel: klogd started: BusyBox v1.17.1 (Debian 1:1.17.1-8)
May 25 08:54:56 kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 25 08:54:56 kernel: [ 0.000000] Initializing cgroup subsys cpu
May 25 08:54:56 kernel: [ 0.000000] Linux version 2.6.32-5-486 (Debian
2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sun
May 6 03:29:22 UTC 2012
May 25 08:54:56 kernel: [ 0.000000] KERNEL supported cpus:
May 25 08:54:56 kernel: [ 0.000000] Intel GenuineIntel
May 25 08:54:56 kernel: [ 0.000000] AMD AuthenticAMD
May 25 08:54:56 kernel: [ 0.000000] NSC Geode by NSC
May 25 08:54:56 kernel: [ 0.000000] Cyrix CyrixInstead
May 25 08:54:56 kernel: [ 0.000000] Centaur CentaurHauls
May 25 08:54:56 kernel: [ 0.000000] Transmeta GenuineTMx86
May 25 08:54:56 kernel: [ 0.000000] Transmeta TransmetaCPU
May 25 08:54:56 kernel: [ 0.000000] UMC UMC UMC UMC
May 25 08:54:56 kernel: [ 0.000000] BIOS-provided physical RAM map:
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 0000000000100000 -
000000003ffd0000 (usable)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 000000003ffd0000 -
000000003fff0c00 (reserved)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 000000003fff0c00 -
000000003fffc000 (ACPI NVS)
May 25 08:54:56 kernel: [ 0.000000] BIOS-e820: 000000003fffc000 -
0000000040000000 (reserved)
May 25 08:54:56 kernel: [ 0.000000] DMI 2.3 present.
May 25 08:54:56 kernel: [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn =
0x100000
May 25 08:54:56 kernel: [ 0.000000] MTRR default type: uncachable
May 25 08:54:56 kernel: [ 0.000000] MTRR fixed ranges enabled:
May 25 08:54:56 kernel: [ 0.000000] 00000-9FFFF write-back
May 25 08:54:56 kernel: [ 0.000000] A0000-BFFFF uncachable
May 25 08:54:56 kernel: [ 0.000000] C0000-CFFFF write-protect
May 25 08:54:56 kernel: [ 0.000000] D0000-EFFFF uncachable
May 25 08:54:56 kernel: [ 0.000000] F0000-FFFFF write-protect
May 25 08:54:56 kernel: [ 0.000000] MTRR variable ranges enabled:
May 25 08:54:56 kernel: [ 0.000000] 0 base 000000000 mask FC0000000
write-back
May 25 08:54:56 kernel: [ 0.000000] 1 disabled
May 25 08:54:56 kernel: [ 0.000000] 2 disabled
May 25 08:54:56 kernel: [ 0.000000] 3 disabled
May 25 08:54:56 kernel: [ 0.000000] 4 disabled
May 25 08:54:56 kernel: [ 0.000000] 5 disabled
May 25 08:54:56 kernel: [ 0.000000] 6 disabled
May 25 08:54:56 kernel: [ 0.000000] 7 disabled
May 25 08:54:56 kernel: [ 0.000000] PAT not supported by CPU.
May 25 08:54:56 kernel: [ 0.000000] initial memory mapped : 0 - 01800000
May 25 08:54:56 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000377fe000
May 25 08:54:56 kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
May 25 08:54:56 kernel: [ 0.000000] 0000400000 - 0037400000 page 2M
May 25 08:54:56 kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k
May 25 08:54:56 kernel: [ 0.000000] kernel direct mapping tables up to
377fe000 @ 7000-c000
May 25 08:54:56 kernel: [ 0.000000] RAMDISK: 3fbb7000 - 3ffaef47
May 25 08:54:56 kernel: [ 0.000000] Allocated new RAMDISK: 00100000 -
004f7f47
May 25 08:54:56 kernel: [ 0.000000] Move RAMDISK from 000000003fbb7000 -
000000003ffaef46 to 00100000 - 004f7f46
May 25 08:54:56 kernel: [ 0.000000] ACPI: RSDP 000f6f80 00014 (v00 COMPAQ)
May 25 08:54:56 kernel: [ 0.000000] ACPI: RSDT 3fff0c84 0002C (v01 HP HP0890
23070420 CPQ 00000001)
May 25 08:54:56 kernel: [ 0.000000] ACPI: FACP 3fff0c00 00084 (v02 HP HP0890
00000002 CPQ 00000001)
May 25 08:54:56 kernel: [ 0.000000] ACPI: DSDT 3fff0cb0 062D9 (v01 HP nc6000
00010000 MSFT 0100000E)
May 25 08:54:56 kernel: [ 0.000000] ACPI: FACS 3fffbe80 00040
May 25 08:54:56 kernel: [ 0.000000] ACPI: SSDT 3fff6f89 0028A (v01 COMPAQ
CPQGysr 00001001 MSFT 0100000E)
May 25 08:54:56 kernel: [ 0.000000] 135MB HIGHMEM available.
May 25 08:54:56 kernel: [ 0.000000] 887MB LOWMEM available.
May 25 08:54:56 kernel: [ 0.000000] mapped low ram: 0 - 377fe000
May 25 08:54:56 kernel: [ 0.000000] low ram: 0 - 377fe000
May 25 08:54:56 kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000
May 25 08:54:56 kernel: [ 0.000000] node 0 bootmap 00008000 - 0000ef00
May 25 08:54:56 kernel: [ 0.000000] (7 early reservations) ==> bootmem
[0000000000 - 00377fe000]
May 25 08:54:56 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data
page ==> [0000000000 - 0000001000]
May 25 08:54:56 kernel: [ 0.000000] #1 [0001000000 - 0001453a90] TEXT DATA
BSS ==> [0001000000 - 0001453a90]
May 25 08:54:56 kernel: [ 0.000000] #2 [000009fc00 - 0000100000] BIOS
reserved ==> [000009fc00 - 0000100000]
May 25 08:54:56 kernel: [ 0.000000] #3 [0001454000 - 000145a148] BRK ==>
[0001454000 - 000145a148]
May 25 08:54:56 kernel: [ 0.000000] #4 [0000007000 - 0000008000] PGTABLE ==>
[0000007000 - 0000008000]
May 25 08:54:56 kernel: [ 0.000000] #5 [0000100000 - 00004f7f47] NEW RAMDISK
==> [0000100000 - 00004f7f47]
May 25 08:54:56 kernel: [ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==>
[0000008000 - 000000f000]
May 25 08:54:56 kernel: [ 0.000000] Zone PFN ranges:
May 25 08:54:56 kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
May 25 08:54:56 kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe
May 25 08:54:56 kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003ffd0
May 25 08:54:56 kernel: [ 0.000000] Movable zone start PFN for each node
May 25 08:54:56 kernel: [ 0.000000] early_node_map[2] active PFN ranges
May 25 08:54:56 kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f
May 25 08:54:56 kernel: [ 0.000000] 0: 0x00000100 -> 0x0003ffd0
May 25 08:54:56 kernel: [ 0.000000] On node 0 totalpages: 261999
May 25 08:54:56 kernel: [ 0.000000] free_area_init_node: node 0, pgdat
c1360c64, node_mem_map c145c000
May 25 08:54:56 kernel: [ 0.000000] DMA zone: 32 pages used for memmap
May 25 08:54:56 kernel: [ 0.000000] DMA zone: 0 pages reserved
May 25 08:54:56 kernel: [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
May 25 08:54:56 kernel: [ 0.000000] Normal zone: 1744 pages used for memmap
May 25 08:54:56 kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
May 25 08:54:56 kernel: [ 0.000000] HighMem zone: 272 pages used for memmap
May 25 08:54:56 kernel: [ 0.000000] HighMem zone: 34498 pages, LIFO batch:7
May 25 08:54:56 kernel: [ 0.000000] Using APIC driver default
May 25 08:54:56 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
May 25 08:54:56 kernel: [ 0.000000] Local APIC disabled by BIOS -- you can
enable it with "lapic"
May 25 08:54:56 kernel: [ 0.000000] APIC: disable apic facility
May 25 08:54:56 kernel: [ 0.000000] nr_irqs_gsi: 16
May 25 08:54:56 kernel: [ 0.000000] PM: Registered nosave memory:
000000000009f000 - 00000000000a0000
May 25 08:54:56 kernel: [ 0.000000] PM: Registered nosave memory:
00000000000a0000 - 00000000000e0000
May 25 08:54:56 kernel: [ 0.000000] PM: Registered nosave memory:
00000000000e0000 - 0000000000100000
May 25 08:54:56 kernel: [ 0.000000] Allocating PCI resources starting at
40000000 (gap: 40000000:c0000000)
May 25 08:54:56 kernel: [ 0.000000] Booting paravirtualized kernel on bare
hardware
May 25 08:54:56 kernel: [ 0.000000] Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 259951
May 25 08:54:56 kernel: [ 0.000000] Kernel command line: vga=788
initrd=/install.386/initrd.gz -- quiet BOOT_IMAGE=/install.386/vmlinuz
May 25 08:54:56 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2,
16384 bytes)
May 25 08:54:56 kernel: [ 0.000000] Dentry cache hash table entries: 131072
(order: 7, 524288 bytes)
May 25 08:54:56 kernel: [ 0.000000] Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
May 25 08:54:56 kernel: [ 0.000000] Enabling fast FPU save and restore...
done.
May 25 08:54:56 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception
support... done.
May 25 08:54:56 kernel: [ 0.000000] Initializing CPU#0
May 25 08:54:56 kernel: [ 0.000000] Initializing HighMem for node 0
(000377fe:0003ffd0)
May 25 08:54:56 kernel: [ 0.000000] Memory: 1030076k/1048384k available
(2342k kernel code, 17536k reserved, 1145k data, 444k init, 139080k highmem)
May 25 08:54:56 kernel: [ 0.000000] virtual kernel memory layout:
May 25 08:54:56 kernel: [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372
kB)
May 25 08:54:56 kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096
kB)
May 25 08:54:56 kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120
MB)
May 25 08:54:56 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887
MB)
May 25 08:54:56 kernel: [ 0.000000] .init : 0xc1368000 - 0xc13d7000 ( 444
kB)
May 25 08:54:56 kernel: [ 0.000000] .data : 0xc124985d - 0xc1367c84 (1145
kB)
May 25 08:54:56 kernel: [ 0.000000] .text : 0xc1000000 - 0xc124985d (2342
kB)
May 25 08:54:56 kernel: [ 0.000000] Checking if this processor honours the
WP bit even in supervisor mode...Ok.
May 25 08:54:56 kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64,
Order=0-3, MinObjects=0, CPUs=1, Nodes=1
May 25 08:54:56 kernel: [ 0.000000] Hierarchical RCU implementation.
May 25 08:54:56 kernel: [ 0.000000] NR_IRQS:288
May 25 08:54:56 kernel: [ 0.000000] Console: colour dummy device 80x25
May 25 08:54:56 kernel: [ 0.000000] console [tty0] enabled
May 25 08:54:56 kernel: [ 0.000000] Fast TSC calibration using PIT
May 25 08:54:56 kernel: [ 0.000000] Detected 1594.575 MHz processor.
May 25 08:54:56 kernel: [ 0.008005] Calibrating delay loop (skipped), value
calculated using timer frequency.. 3189.15 BogoMIPS (lpj=6378300)
May 25 08:54:56 kernel: [ 0.008021] Security Framework initialized
May 25 08:54:56 kernel: [ 0.008028] SELinux: Disabled at boot.
May 25 08:54:56 kernel: [ 0.008035] Mount-cache hash table entries: 512
May 25 08:54:56 kernel: [ 0.008152] Initializing cgroup subsys ns
May 25 08:54:56 kernel: [ 0.008156] Initializing cgroup subsys cpuacct
May 25 08:54:56 kernel: [ 0.008159] Initializing cgroup subsys devices
May 25 08:54:56 kernel: [ 0.008162] Initializing cgroup subsys freezer
May 25 08:54:56 kernel: [ 0.008164] Initializing cgroup subsys net_cls
May 25 08:54:56 kernel: [ 0.008190] CPU: L1 I cache: 32K, L1 D cache: 32K
May 25 08:54:56 kernel: [ 0.008193] CPU: L2 cache: 2048K
May 25 08:54:56 kernel: [ 0.008204] CPU: Intel(R) Pentium(R) M processor
1.60GHz stepping 06
May 25 08:54:56 kernel: [ 0.008210] Checking 'hlt' instruction... OK.
May 25 08:54:56 kernel: [ 0.026048] ACPI: Core revision 20090903
May 25 08:54:56 kernel: [ 0.033868] ACPI: setting ELCR to 0200 (from 0c00)
May 25 08:54:56 kernel: [ 0.036251] devtmpfs: initialized
May 25 08:54:56 kernel: [ 0.036616] regulator: core version 0.5
May 25 08:54:56 kernel: [ 0.036671] NET: Registered protocol family 16
May 25 08:54:56 kernel: [ 0.036776] EISA bus registered
May 25 08:54:56 kernel: [ 0.036785] ACPI: bus type pci registered
May 25 08:54:56 kernel: [ 0.038156] PCI: PCI BIOS revision 2.10 entry at
0xf031f, last bus=5
May 25 08:54:56 kernel: [ 0.038158] PCI: Using configuration type 1 for base
access
May 25 08:54:56 kernel: [ 0.038597] bio: create slab <bio-0> at 0
May 25 08:54:56 kernel: [ 0.040551] ACPI: EC: Look up EC in DSDT
May 25 08:54:56 kernel: [ 0.060148] ACPI: Interpreter enabled
May 25 08:54:56 kernel: [ 0.060155] ACPI: (supports S0 S3 S4 S5)
May 25 08:54:56 kernel: [ 0.060175] ACPI: Using PIC for interrupt routing
May 25 08:54:56 kernel: [ 0.068879] ACPI: EC: GPE = 0x10, I/O:
command/status = 0x66, data = 0x62
May 25 08:54:56 kernel: [ 0.069056] ACPI: Power Resource [C16E] (on)
May 25 08:54:56 kernel: [ 0.069198] ACPI: Power Resource [C13E] (on)
May 25 08:54:56 kernel: [ 0.069355] ACPI: Power Resource [C185] (on)
May 25 08:54:56 kernel: [ 0.069501] ACPI: Power Resource [C18C] (on)
May 25 08:54:56 kernel: [ 0.069541] ACPI: Power Resource [C196] (on)
May 25 08:54:56 kernel: [ 0.069601] ACPI: Power Resource [C0E7] (on)
May 25 08:54:56 kernel: [ 0.069677] ACPI: Power Resource [C202] (off)
May 25 08:54:56 kernel: [ 0.069750] ACPI: Power Resource [C203] (off)
May 25 08:54:56 kernel: [ 0.069822] ACPI: Power Resource [C204] (off)
May 25 08:54:56 kernel: [ 0.069894] ACPI: Power Resource [C205] (off)
May 25 08:54:56 kernel: [ 0.070055] ACPI: No dock devices found.
May 25 08:54:56 kernel: [ 0.075079] ACPI: PCI Root Bridge [C045] (0000:00)
May 25 08:54:56 kernel: [ 0.075123] pci 0000:00:00.0: reg 10 32bit mmio
pref: [0xb0000000-0xbfffffff]
May 25 08:54:56 kernel: [ 0.075240] pci 0000:00:1d.0: reg 20 io port:
[0x38c0-0x38df]
May 25 08:54:56 kernel: [ 0.075295] pci 0000:00:1d.1: reg 20 io port:
[0x38e0-0x38ff]
May 25 08:54:56 kernel: [ 0.075349] pci 0000:00:1d.2: reg 20 io port:
[0x3c00-0x3c1f]
May 25 08:54:56 kernel: [ 0.075410] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xa0000000-0xa00003ff]
May 25 08:54:56 kernel: [ 0.075480] pci 0000:00:1d.7: PME# supported from D0
D3hot D3cold
May 25 08:54:56 kernel: [ 0.075486] pci 0000:00:1d.7: PME# disabled
May 25 08:54:56 kernel: [ 0.075575] pci 0000:00:1f.0: Enabled i801 SMBus
device
May 25 08:54:56 kernel: [ 0.075582] pci 0000:00:1f.0: quirk: region
1000-107f claimed by ICH4 ACPI/GPIO/TCO
May 25 08:54:56 kernel: [ 0.075588] pci 0000:00:1f.0: quirk: region
1100-113f claimed by ICH4 GPIO
May 25 08:54:56 kernel: [ 0.075614] pci 0000:00:1f.1: reg 10 io port:
[0x00-0x07]
May 25 08:54:56 kernel: [ 0.075622] pci 0000:00:1f.1: reg 14 io port:
[0x00-0x03]
May 25 08:54:56 kernel: [ 0.075629] pci 0000:00:1f.1: reg 18 io port:
[0x00-0x07]
May 25 08:54:56 kernel: [ 0.075637] pci 0000:00:1f.1: reg 1c io port:
[0x00-0x03]
May 25 08:54:56 kernel: [ 0.075644] pci 0000:00:1f.1: reg 20 io port:
[0x3c20-0x3c2f]
May 25 08:54:56 kernel: [ 0.075652] pci 0000:00:1f.1: reg 24 32bit mmio:
[0x000000-0x0003ff]
May 25 08:54:56 kernel: [ 0.075704] pci 0000:00:1f.3: reg 20 io port:
[0x1200-0x121f]
May 25 08:54:56 kernel: [ 0.075749] pci 0000:00:1f.5: reg 10 io port:
[0x3000-0x30ff]
May 25 08:54:56 kernel: [ 0.075756] pci 0000:00:1f.5: reg 14 io port:
[0x3880-0x38bf]
May 25 08:54:56 kernel: [ 0.075763] pci 0000:00:1f.5: reg 18 32bit mmio:
[0xa0100000-0xa01001ff]
May 25 08:54:56 kernel: [ 0.075771] pci 0000:00:1f.5: reg 1c 32bit mmio:
[0xa0180000-0xa01800ff]
May 25 08:54:56 kernel: [ 0.075807] pci 0000:00:1f.5: PME# supported from D0
D3hot D3cold
May 25 08:54:56 kernel: [ 0.075811] pci 0000:00:1f.5: PME# disabled
May 25 08:54:56 kernel: [ 0.075841] pci 0000:00:1f.6: reg 10 io port:
[0x3400-0x34ff]
May 25 08:54:56 kernel: [ 0.075848] pci 0000:00:1f.6: reg 14 io port:
[0x3800-0x387f]
May 25 08:54:56 kernel: [ 0.075891] pci 0000:00:1f.6: PME# supported from D0
D3hot D3cold
May 25 08:54:56 kernel: [ 0.075896] pci 0000:00:1f.6: PME# disabled
May 25 08:54:56 kernel: [ 0.075932] pci 0000:01:00.0: reg 10 32bit mmio
pref: [0x98000000-0x9fffffff]
May 25 08:54:56 kernel: [ 0.075939] pci 0000:01:00.0: reg 14 io port:
[0x2000-0x20ff]
May 25 08:54:56 kernel: [ 0.075945] pci 0000:01:00.0: reg 18 32bit mmio:
[0x90300000-0x9030ffff]
May 25 08:54:56 kernel: [ 0.075960] pci 0000:01:00.0: reg 30 32bit mmio
pref: [0x000000-0x01ffff]
May 25 08:54:56 kernel: [ 0.075987] pci 0000:01:00.0: supports D1 D2
May 25 08:54:56 kernel: [ 0.076033] pci 0000:00:01.0: bridge io port:
[0x2000-0x2fff]
May 25 08:54:56 kernel: [ 0.076037] pci 0000:00:01.0: bridge 32bit mmio:
[0x90300000-0x903fffff]
May 25 08:54:56 kernel: [ 0.076042] pci 0000:00:01.0: bridge 32bit mmio
pref: [0x98000000-0x9fffffff]
May 25 08:54:56 kernel: [ 0.076081] pci 0000:02:04.0: reg 10 32bit mmio:
[0x90080000-0x9008ffff]
May 25 08:54:56 kernel: [ 0.076167] pci 0000:02:06.0: reg 10 32bit mmio:
[0x90100000-0x90100fff]
May 25 08:54:56 kernel: [ 0.076194] pci 0000:02:06.0: supports D1 D2
May 25 08:54:56 kernel: [ 0.076197] pci 0000:02:06.0: PME# supported from D0
D1 D2 D3hot D3cold
May 25 08:54:56 kernel: [ 0.076202] pci 0000:02:06.0: PME# disabled
May 25 08:54:56 kernel: [ 0.076235] pci 0000:02:06.1: reg 10 32bit mmio:
[0x90180000-0x90180fff]
May 25 08:54:56 kernel: [ 0.076262] pci 0000:02:06.1: supports D1 D2
May 25 08:54:56 kernel: [ 0.076265] pci 0000:02:06.1: PME# supported from D0
D1 D2 D3hot D3cold
May 25 08:54:56 kernel: [ 0.076270] pci 0000:02:06.1: PME# disabled
May 25 08:54:56 kernel: [ 0.076303] pci 0000:02:06.2: reg 10 32bit mmio:
[0x90200000-0x90200fff]
May 25 08:54:56 kernel: [ 0.076354] pci 0000:02:06.2: supports D1 D2
May 25 08:54:56 kernel: [ 0.076357] pci 0000:02:06.2: PME# supported from D0
D1 D2 D3hot D3cold
May 25 08:54:56 kernel: [ 0.076362] pci 0000:02:06.2: PME# disabled
May 25 08:54:56 kernel: [ 0.076395] pci 0000:02:06.3: reg 10 32bit mmio:
[0x90280000-0x90280fff]
May 25 08:54:56 kernel: [ 0.076422] pci 0000:02:06.3: supports D1 D2
May 25 08:54:56 kernel: [ 0.076424] pci 0000:02:06.3: PME# supported from D0
D1 D2 D3hot D3cold
May 25 08:54:56 kernel: [ 0.076429] pci 0000:02:06.3: PME# disabled
May 25 08:54:56 kernel: [ 0.076497] pci 0000:02:0e.0: reg 10 64bit mmio:
[0x90000000-0x9000ffff]
May 25 08:54:56 kernel: [ 0.076523] pci 0000:02:0e.0: reg 30 32bit mmio
pref: [0x000000-0x00ffff]
May 25 08:54:56 kernel: [ 0.076570] pci 0000:02:0e.0: PME# supported from
D3hot D3cold
May 25 08:54:56 kernel: [ 0.076575] pci 0000:02:0e.0: PME# disabled
May 25 08:54:56 kernel: [ 0.076606] pci 0000:00:1e.0: transparent bridge
May 25 08:54:56 kernel: [ 0.076613] pci 0000:00:1e.0: bridge 32bit mmio:
[0x90000000-0x902fffff]
May 25 08:54:56 kernel: [ 0.076668] pci_bus 0000:00: on NUMA node 0
May 25 08:54:56 kernel: [ 0.076673] ACPI: PCI Interrupt Routing Table
[\_SB_.C045._PRT]
May 25 08:54:56 kernel: [ 0.076817] ACPI: PCI Interrupt Routing Table
[\_SB_.C045.C046._PRT]
May 25 08:54:56 kernel: [ 0.076883] ACPI: PCI Interrupt Routing Table
[\_SB_.C045.C057._PRT]
May 25 08:54:56 kernel: [ 0.087731] ACPI: PCI Interrupt Link [C0C2] (IRQs
*10 11)
May 25 08:54:56 kernel: [ 0.087935] ACPI: PCI Interrupt Link [C0C3] (IRQs 10
*11)
May 25 08:54:56 kernel: [ 0.088140] ACPI: PCI Interrupt Link [C0C4] (IRQs
*10 11)
May 25 08:54:56 kernel: [ 0.088336] ACPI: PCI Interrupt Link [C0C5] (IRQs
*10 11)
May 25 08:54:56 kernel: [ 0.088532] ACPI: PCI Interrupt Link [C0C6] (IRQs 10
*11)
May 25 08:54:56 kernel: [ 0.088727] ACPI: PCI Interrupt Link [C0C7] (IRQs 10
*11)
May 25 08:54:56 kernel: [ 0.088912] ACPI: PCI Interrupt Link [C0C8] (IRQs 10
11) *0, disabled.
May 25 08:54:56 kernel: [ 0.089110] ACPI: PCI Interrupt Link [C0C9] (IRQs
*10 11)
May 25 08:54:56 kernel: [ 0.089261] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
May 25 08:54:56 kernel: [ 0.089267] vgaarb: loaded
May 25 08:54:56 kernel: [ 0.089334] PCI: Using ACPI for IRQ routing
May 25 08:54:56 kernel: [ 0.089537] Switching to clocksource tsc
May 25 08:54:56 kernel: [ 0.090909] pnp: PnP ACPI init
May 25 08:54:56 kernel: [ 0.090920] ACPI: bus type pnp registered
May 25 08:54:56 kernel: [ 0.100579] pnp: PnP ACPI: found 15 devices
May 25 08:54:56 kernel: [ 0.100582] ACPI: ACPI bus type pnp unregistered
May 25 08:54:56 kernel: [ 0.100587] PnPBIOS: Disabled by ACPI PNP
May 25 08:54:56 kernel: [ 0.100598] system 00:00: iomem range 0x0-0x9ffff
could not be reserved
May 25 08:54:56 kernel: [ 0.100602] system 00:00: iomem range
0xe0000-0xfffff could not be reserved
May 25 08:54:56 kernel: [ 0.100606] system 00:00: iomem range
0x100000-0x3fffffff could not be reserved
May 25 08:54:56 kernel: [ 0.100616] system 00:0c: ioport range 0x140-0x14f
has been reserved
May 25 08:54:56 kernel: [ 0.100621] system 00:0c: iomem range
0xffb00000-0xffbfffff has been reserved
May 25 08:54:56 kernel: [ 0.100625] system 00:0c: iomem range
0xfff00000-0xffffffff has been reserved
May 25 08:54:56 kernel: [ 0.100631] system 00:0d: ioport range 0x4d0-0x4d1
has been reserved
May 25 08:54:56 kernel: [ 0.100635] system 00:0d: ioport range 0x1000-0x107f
has been reserved
May 25 08:54:56 kernel: [ 0.100639] system 00:0d: ioport range 0x1100-0x113f
has been reserved
May 25 08:54:56 kernel: [ 0.100643] system 00:0d: ioport range 0x1200-0x121f
has been reserved
May 25 08:54:56 kernel: [ 0.100647] system 00:0d: iomem range
0xfec00000-0xfec000ff has been reserved
May 25 08:54:56 kernel: [ 0.100653] system 00:0e: iomem range
0xfec01000-0xfec01fff has been reserved
May 25 08:54:56 kernel: [ 0.135379] pci 0000:00:01.0: PCI bridge, secondary
bus 0000:01
May 25 08:54:56 kernel: [ 0.135382] pci 0000:00:01.0: IO window:
0x2000-0x2fff
May 25 08:54:56 kernel: [ 0.135387] pci 0000:00:01.0: MEM window:
0x90300000-0x903fffff
May 25 08:54:56 kernel: [ 0.135392] pci 0000:00:01.0: PREFETCH window:
0x98000000-0x9fffffff
May 25 08:54:56 kernel: [ 0.135404] pci 0000:02:06.0: CardBus bridge,
secondary bus 0000:03
May 25 08:54:56 kernel: [ 0.135408] pci 0000:02:06.0: IO window:
0x004000-0x0040ff
May 25 08:54:56 kernel: [ 0.135413] pci 0000:02:06.0: IO window:
0x004400-0x0044ff
May 25 08:54:56 kernel: [ 0.135418] pci 0000:02:06.0: PREFETCH window:
0x40000000-0x43ffffff
May 25 08:54:56 kernel: [ 0.135423] pci 0000:02:06.0: MEM window:
0x50000000-0x53ffffff
May 25 08:54:56 kernel: [ 0.135428] pci 0000:02:06.1: CardBus bridge,
secondary bus 0000:05
May 25 08:54:56 kernel: [ 0.135431] pci 0000:02:06.1: IO window:
0x004800-0x0048ff
May 25 08:54:56 kernel: [ 0.135436] pci 0000:02:06.1: IO window:
0x004c00-0x004cff
May 25 08:54:56 kernel: [ 0.135441] pci 0000:02:06.1: PREFETCH window:
0x44000000-0x47ffffff
May 25 08:54:56 kernel: [ 0.135446] pci 0000:02:06.1: MEM window:
0x54000000-0x57ffffff
May 25 08:54:56 kernel: [ 0.135451] pci 0000:02:06.3: CardBus bridge,
secondary bus 0000:09
May 25 08:54:56 kernel: [ 0.135454] pci 0000:02:06.3: IO window:
0x005000-0x0050ff
May 25 08:54:56 kernel: [ 0.135459] pci 0000:02:06.3: IO window:
0x005400-0x0054ff
May 25 08:54:56 kernel: [ 0.135464] pci 0000:02:06.3: PREFETCH window:
0x48000000-0x4bffffff
May 25 08:54:56 kernel: [ 0.135469] pci 0000:02:06.3: MEM window:
0x58000000-0x5bffffff
May 25 08:54:56 kernel: [ 0.135474] pci 0000:00:1e.0: PCI bridge, secondary
bus 0000:02
May 25 08:54:56 kernel: [ 0.135478] pci 0000:00:1e.0: IO window:
0x4000-0x5fff
May 25 08:54:56 kernel: [ 0.135485] pci 0000:00:1e.0: MEM window:
0x90000000-0x902fffff
May 25 08:54:56 kernel: [ 0.135490] pci 0000:00:1e.0: PREFETCH window:
0x40000000-0x4dffffff
May 25 08:54:56 kernel: [ 0.135507] pci 0000:00:1e.0: setting latency timer
to 64
May 25 08:54:56 kernel: [ 0.135799] ACPI: PCI Interrupt Link [C0C4] enabled
at IRQ 10
May 25 08:54:56 kernel: [ 0.135802] PCI: setting IRQ 10 as level-triggered
May 25 08:54:56 kernel: [ 0.135808] pci 0000:02:06.0: PCI INT A ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.135821] pci 0000:02:06.1: PCI INT A ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.135833] pci 0000:02:06.3: PCI INT A ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.135840] pci_bus 0000:00: resource 0 io:
[0x00-0xffff]
May 25 08:54:56 kernel: [ 0.135844] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffff]
May 25 08:54:56 kernel: [ 0.135847] pci_bus 0000:01: resource 0 io:
[0x2000-0x2fff]
May 25 08:54:56 kernel: [ 0.135851] pci_bus 0000:01: resource 1 mem:
[0x90300000-0x903fffff]
May 25 08:54:56 kernel: [ 0.135854] pci_bus 0000:01: resource 2 pref mem
[0x98000000-0x9fffffff]
May 25 08:54:56 kernel: [ 0.135858] pci_bus 0000:02: resource 0 io:
[0x4000-0x5fff]
May 25 08:54:56 kernel: [ 0.135861] pci_bus 0000:02: resource 1 mem:
[0x90000000-0x902fffff]
May 25 08:54:56 kernel: [ 0.135865] pci_bus 0000:02: resource 2 pref mem
[0x40000000-0x4dffffff]
May 25 08:54:56 kernel: [ 0.135868] pci_bus 0000:02: resource 3 io:
[0x00-0xffff]
May 25 08:54:56 kernel: [ 0.135871] pci_bus 0000:02: resource 4 mem:
[0x000000-0xffffffff]
May 25 08:54:56 kernel: [ 0.135875] pci_bus 0000:03: resource 0 io:
[0x4000-0x40ff]
May 25 08:54:56 kernel: [ 0.135878] pci_bus 0000:03: resource 1 io:
[0x4400-0x44ff]
May 25 08:54:56 kernel: [ 0.135881] pci_bus 0000:03: resource 2 pref mem
[0x40000000-0x43ffffff]
May 25 08:54:56 kernel: [ 0.135885] pci_bus 0000:03: resource 3 mem:
[0x50000000-0x53ffffff]
May 25 08:54:56 kernel: [ 0.135888] pci_bus 0000:05: resource 0 io:
[0x4800-0x48ff]
May 25 08:54:56 kernel: [ 0.135891] pci_bus 0000:05: resource 1 io:
[0x4c00-0x4cff]
May 25 08:54:56 kernel: [ 0.135895] pci_bus 0000:05: resource 2 pref mem
[0x44000000-0x47ffffff]
May 25 08:54:56 kernel: [ 0.135898] pci_bus 0000:05: resource 3 mem:
[0x54000000-0x57ffffff]
May 25 08:54:56 kernel: [ 0.135902] pci_bus 0000:09: resource 0 io:
[0x5000-0x50ff]
May 25 08:54:56 kernel: [ 0.135905] pci_bus 0000:09: resource 1 io:
[0x5400-0x54ff]
May 25 08:54:56 kernel: [ 0.135908] pci_bus 0000:09: resource 2 pref mem
[0x48000000-0x4bffffff]
May 25 08:54:56 kernel: [ 0.135912] pci_bus 0000:09: resource 3 mem:
[0x58000000-0x5bffffff]
May 25 08:54:56 kernel: [ 0.135943] NET: Registered protocol family 2
May 25 08:54:56 kernel: [ 0.136024] IP route cache hash table entries: 32768
(order: 5, 131072 bytes)
May 25 08:54:56 kernel: [ 0.136364] TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
May 25 08:54:56 kernel: [ 0.137598] TCP bind hash table entries: 65536
(order: 6, 262144 bytes)
May 25 08:54:56 kernel: [ 0.138021] TCP: Hash tables configured (established
131072 bind 65536)
May 25 08:54:56 kernel: [ 0.138025] TCP reno registered
May 25 08:54:56 kernel: [ 0.138135] NET: Registered protocol family 1
May 25 08:54:56 kernel: [ 0.138565] ACPI: PCI Interrupt Link [C0C2] enabled
at IRQ 10
May 25 08:54:56 kernel: [ 0.138573] pci 0000:00:1d.0: PCI INT A ->
Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.138591] pci 0000:00:1d.0: PCI INT A disabled
May 25 08:54:56 kernel: [ 0.138872] ACPI: PCI Interrupt Link [C0C5] enabled
at IRQ 10
May 25 08:54:56 kernel: [ 0.138877] pci 0000:00:1d.1: PCI INT B ->
Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.138893] pci 0000:00:1d.1: PCI INT B disabled
May 25 08:54:56 kernel: [ 0.138901] pci 0000:00:1d.2: PCI INT C ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.138917] pci 0000:00:1d.2: PCI INT C disabled
May 25 08:54:56 kernel: [ 0.139196] ACPI: PCI Interrupt Link [C0C9] enabled
at IRQ 10
May 25 08:54:56 kernel: [ 0.139201] pci 0000:00:1d.7: PCI INT D ->
Link[C0C9] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 0.139228] pci 0000:00:1d.7: PCI INT D disabled
May 25 08:54:56 kernel: [ 0.139242] pci 0000:01:00.0: Boot video device
May 25 08:54:56 kernel: [ 0.139322] Unpacking initramfs...
May 25 08:54:56 kernel: [ 0.302277] Freeing initrd memory: 4063k freed
May 25 08:54:56 kernel: [ 0.308019] audit: initializing netlink socket
(disabled)
May 25 08:54:56 kernel: [ 0.308041] type=2000 audit(1337936093.306:1):
initialized
May 25 08:54:56 kernel: [ 0.313392] highmem bounce pool size: 64 pages
May 25 08:54:56 kernel: [ 0.313399] HugeTLB registered 4 MB page size,
pre-allocated 0 pages
May 25 08:54:56 kernel: [ 0.315206] VFS: Disk quotas dquot_6.5.2
May 25 08:54:56 kernel: [ 0.315276] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
May 25 08:54:56 kernel: [ 0.315360] msgmni has been set to 1748
May 25 08:54:56 kernel: [ 0.315561] alg: No test for stdrng (krng)
May 25 08:54:56 kernel: [ 0.315628] Block layer SCSI generic (bsg) driver
version 0.4 loaded (major 253)
May 25 08:54:56 kernel: [ 0.315632] io scheduler noop registered
May 25 08:54:56 kernel: [ 0.315634] io scheduler anticipatory registered
May 25 08:54:56 kernel: [ 0.315637] io scheduler deadline registered
May 25 08:54:56 kernel: [ 0.315649] io scheduler cfq registered (default)
May 25 08:54:56 kernel: [ 0.315872] vesafb: framebuffer at 0x98000000,
mapped to 0xf8080000, using 1875k, total 32704k
May 25 08:54:56 kernel: [ 0.315876] vesafb: mode is 800x600x16,
linelength=1600, pages=33
May 25 08:54:56 kernel: [ 0.315879] vesafb: protected mode interface info at
c000:59e9
May 25 08:54:56 kernel: [ 0.315882] vesafb: pmi: set display start =
c00c5a57, set palette = c00c5a91
May 25 08:54:56 kernel: [ 0.315884] vesafb: pmi: ports = 2010 2016 2054 2038
203c 205c 2000 2004 20b0 20b2 20b4
May 25 08:54:56 kernel: [ 0.315892] vesafb: scrolling: redraw
May 25 08:54:56 kernel: [ 0.315897] vesafb: Truecolor: size=0:5:6:5,
shift=0:11:5:0
May 25 08:54:56 kernel: [ 0.334653] Console: switching to colour frame
buffer device 100x37
May 25 08:54:56 kernel: [ 0.352997] fb0: VESA VGA frame buffer device
May 25 08:54:56 kernel: [ 0.353060] isapnp: Scanning for PnP cards...
May 25 08:54:56 kernel: [ 0.663395] isapnp: No Plug & Play device found
May 25 08:54:56 kernel: [ 0.664827] Linux agpgart interface v0.103
May 25 08:54:56 kernel: [ 0.664898] agpgart-intel 0000:00:00.0: Intel 855PM
Chipset
May 25 08:54:56 kernel: [ 0.679039] agpgart-intel 0000:00:00.0: AGP aperture
is 256M @ 0xb0000000
May 25 08:54:56 kernel: [ 0.679121] Serial: 8250/16550 driver, 4 ports, IRQ
sharing enabled
May 25 08:54:56 kernel: [ 0.679220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
May 25 08:54:56 kernel: [ 0.679351] serial8250: ttyS2 at I/O 0x3e8 (irq = 4)
is a 16550A
May 25 08:54:56 kernel: [ 0.679574] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
May 25 08:54:56 kernel: [ 0.680135] ACPI: PCI Interrupt Link [C0C3] enabled
at IRQ 11
May 25 08:54:56 kernel: [ 0.680138] PCI: setting IRQ 11 as level-triggered
May 25 08:54:56 kernel: [ 0.680144] serial 0000:00:1f.6: PCI INT B ->
Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
May 25 08:54:56 kernel: [ 0.680152] serial 0000:00:1f.6: PCI INT B disabled
May 25 08:54:56 kernel: [ 0.680248] PNP: PS/2 Controller
[PNP0303:C193,PNP0f13:C194] at 0x60,0x64 irq 1,12
May 25 08:54:56 kernel: [ 0.681867] i8042.c: Detected active multiplexing
controller, rev 1.1.
May 25 08:54:56 kernel: [ 0.682578] serio: i8042 KBD port at 0x60,0x64 irq 1
May 25 08:54:56 kernel: [ 0.682596] serio: i8042 AUX0 port at 0x60,0x64 irq
12
May 25 08:54:56 kernel: [ 0.682626] serio: i8042 AUX1 port at 0x60,0x64 irq
12
May 25 08:54:56 kernel: [ 0.682649] serio: i8042 AUX2 port at 0x60,0x64 irq
12
May 25 08:54:56 kernel: [ 0.682672] serio: i8042 AUX3 port at 0x60,0x64 irq
12
May 25 08:54:56 kernel: [ 0.682771] mice: PS/2 mouse device common for all
mice
May 25 08:54:56 kernel: [ 0.682832] rtc_cmos 00:09: RTC can wake from S4
May 25 08:54:56 kernel: [ 0.682873] rtc_cmos 00:09: rtc core: registered
rtc_cmos as rtc0
May 25 08:54:56 kernel: [ 0.682890] rtc0: alarms up to one month, y3k, 114
bytes nvram
May 25 08:54:56 kernel: [ 0.682927] EISA: Probing bus 0 at eisa.0
May 25 08:54:56 kernel: [ 0.682934] Cannot allocate resource for EISA slot 1
May 25 08:54:56 kernel: [ 0.682937] Cannot allocate resource for EISA slot 2
May 25 08:54:56 kernel: [ 0.682940] Cannot allocate resource for EISA slot 3
May 25 08:54:56 kernel: [ 0.682943] Cannot allocate resource for EISA slot 4
May 25 08:54:56 kernel: [ 0.682946] Cannot allocate resource for EISA slot 5
May 25 08:54:56 kernel: [ 0.682960] EISA: Detected 0 cards.
May 25 08:54:56 kernel: [ 0.682963] cpuidle: using governor ladder
May 25 08:54:56 kernel: [ 0.682966] cpuidle: using governor menu
May 25 08:54:56 kernel: [ 0.682971] No iBFT detected.
May 25 08:54:56 kernel: [ 0.683387] TCP cubic registered
May 25 08:54:56 kernel: [ 0.683552] NET: Registered protocol family 10
May 25 08:54:56 kernel: [ 0.684330] Mobile IPv6
May 25 08:54:56 kernel: [ 0.684333] NET: Registered protocol family 17
May 25 08:54:56 kernel: [ 0.684340] Using IPI Shortcut mode
May 25 08:54:56 kernel: [ 0.684418] PM: Resume from disk failed.
May 25 08:54:56 kernel: [ 0.684430] registered taskstats version 1
May 25 08:54:56 kernel: [ 0.684717] rtc_cmos 00:09: setting system clock to
2012-05-25 08:54:54 UTC (1337936094)
May 25 08:54:56 kernel: [ 0.684767] Initalizing network drop monitor service
May 25 08:54:56 kernel: [ 0.684788] Freeing unused kernel memory: 444k freed
May 25 08:54:56 kernel: [ 0.685017] Write protecting the kernel text: 2344k
May 25 08:54:56 kernel: [ 0.685037] Write protecting the kernel read-only
data: 896k
May 25 08:54:56 kernel: [ 0.704982] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
May 25 08:54:56 kernel: [ 1.311335] SCSI subsystem initialized
May 25 08:54:56 kernel: [ 1.328736] usbcore: registered new interface driver
usbfs
May 25 08:54:56 kernel: [ 1.328884] usbcore: registered new interface driver
hub
May 25 08:54:56 kernel: [ 1.337855] Floppy drive(s): fd0 is 1.44M
May 25 08:54:56 kernel: [ 1.338458] usbcore: registered new device driver
usb
May 25 08:54:56 kernel: [ 1.375323] parport_pc 00:05: reported by Plug and
Play ACPI
May 25 08:54:56 kernel: [ 1.375371] parport0: PC-style at 0x378 (0x778), irq
7 [PCSPP,TRISTATE]
May 25 08:54:56 kernel: [ 1.378225] FDC 0 is a post-1991 82077
May 25 08:54:56 kernel: [ 1.400143] yenta_cardbus 0000:02:06.0: CardBus
bridge found [103c:0890]
May 25 08:54:56 kernel: [ 1.400164] yenta_cardbus 0000:02:06.0: O2: res at
0x94/0xD4: ea/00
May 25 08:54:56 kernel: [ 1.400167] yenta_cardbus 0000:02:06.0: O2: enabling
read prefetch/write burst
May 25 08:54:56 kernel: [ 1.400220] ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
May 25 08:54:56 kernel: [ 1.400243] ehci_hcd 0000:00:1d.7: PCI INT D ->
Link[C0C9] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 1.400256] ehci_hcd 0000:00:1d.7: setting latency
timer to 64
May 25 08:54:56 kernel: [ 1.400260] ehci_hcd 0000:00:1d.7: EHCI Host
Controller
May 25 08:54:56 kernel: [ 1.400285] ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 1
May 25 08:54:56 kernel: [ 1.400321] ehci_hcd 0000:00:1d.7: debug port 1
May 25 08:54:56 kernel: [ 1.404209] ehci_hcd 0000:00:1d.7: cache line size
of 32 is not supported
May 25 08:54:56 kernel: [ 1.404239] libata version 3.00 loaded.
May 25 08:54:56 kernel: [ 1.412027] ehci_hcd 0000:00:1d.7: irq 10, io mem
0xa0000000
May 25 08:54:56 kernel: [ 1.420346] thermal LNXTHERM:01: registered as
thermal_zone0
May 25 08:54:56 kernel: [ 1.420355] ACPI: Thermal Zone [TZ1] (61 C)
May 25 08:54:56 kernel: [ 1.425299] ehci_hcd 0000:00:1d.7: USB 2.0 started,
EHCI 1.00
May 25 08:54:56 kernel: [ 1.425347] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
May 25 08:54:56 kernel: [ 1.425350] usb usb1: New USB device strings: Mfr=3,
Product=2, SerialNumber=1
May 25 08:54:56 kernel: [ 1.425354] usb usb1: Product: EHCI Host Controller
May 25 08:54:56 kernel: [ 1.425357] usb usb1: Manufacturer: Linux
2.6.32-5-486 ehci_hcd
May 25 08:54:56 kernel: [ 1.425359] usb usb1: SerialNumber: 0000:00:1d.7
May 25 08:54:56 kernel: [ 1.425456] usb usb1: configuration #1 chosen from 1
choice
May 25 08:54:56 kernel: [ 1.425492] hub 1-0:1.0: USB hub found
May 25 08:54:56 kernel: [ 1.425501] hub 1-0:1.0: 6 ports detected
May 25 08:54:56 kernel: [ 1.436708] uhci_hcd: USB Universal Host Controller
Interface driver
May 25 08:54:56 kernel: [ 1.436769] uhci_hcd 0000:00:1d.0: PCI INT A ->
Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 1.436781] uhci_hcd 0000:00:1d.0: setting latency
timer to 64
May 25 08:54:56 kernel: [ 1.436785] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
May 25 08:54:56 kernel: [ 1.436798] uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 2
May 25 08:54:56 kernel: [ 1.436823] uhci_hcd 0000:00:1d.0: irq 10, io base
0x000038c0
May 25 08:54:56 kernel: [ 1.436866] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0001
May 25 08:54:56 kernel: [ 1.436870] usb usb2: New USB device strings: Mfr=3,
Product=2, SerialNumber=1
May 25 08:54:56 kernel: [ 1.436873] usb usb2: Product: UHCI Host Controller
May 25 08:54:56 kernel: [ 1.436876] usb usb2: Manufacturer: Linux
2.6.32-5-486 uhci_hcd
May 25 08:54:56 kernel: [ 1.436879] usb usb2: SerialNumber: 0000:00:1d.0
May 25 08:54:56 kernel: [ 1.437006] usb usb2: configuration #1 chosen from 1
choice
May 25 08:54:56 kernel: [ 1.437080] hub 2-0:1.0: USB hub found
May 25 08:54:56 kernel: [ 1.437088] hub 2-0:1.0: 2 ports detected
May 25 08:54:56 kernel: [ 1.437138] uhci_hcd 0000:00:1d.1: PCI INT B ->
Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 1.437147] uhci_hcd 0000:00:1d.1: setting latency
timer to 64
May 25 08:54:56 kernel: [ 1.437151] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
May 25 08:54:56 kernel: [ 1.437159] uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 3
May 25 08:54:56 kernel: [ 1.437181] uhci_hcd 0000:00:1d.1: irq 10, io base
0x000038e0
May 25 08:54:56 kernel: [ 1.437214] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
May 25 08:54:56 kernel: [ 1.437217] usb usb3: New USB device strings: Mfr=3,
Product=2, SerialNumber=1
May 25 08:54:56 kernel: [ 1.437220] usb usb3: Product: UHCI Host Controller
May 25 08:54:56 kernel: [ 1.437223] usb usb3: Manufacturer: Linux
2.6.32-5-486 uhci_hcd
May 25 08:54:56 kernel: [ 1.437226] usb usb3: SerialNumber: 0000:00:1d.1
May 25 08:54:56 kernel: [ 1.437338] usb usb3: configuration #1 chosen from 1
choice
May 25 08:54:56 kernel: [ 1.437411] hub 3-0:1.0: USB hub found
May 25 08:54:56 kernel: [ 1.437419] hub 3-0:1.0: 2 ports detected
May 25 08:54:56 kernel: [ 1.437465] uhci_hcd 0000:00:1d.2: PCI INT C ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 1.437473] uhci_hcd 0000:00:1d.2: setting latency
timer to 64
May 25 08:54:56 kernel: [ 1.437477] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
May 25 08:54:56 kernel: [ 1.437484] uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 4
May 25 08:54:56 kernel: [ 1.437506] uhci_hcd 0000:00:1d.2: irq 10, io base
0x00003c00
May 25 08:54:56 kernel: [ 1.437542] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
May 25 08:54:56 kernel: [ 1.437546] usb usb4: New USB device strings: Mfr=3,
Product=2, SerialNumber=1
May 25 08:54:56 kernel: [ 1.437549] usb usb4: Product: UHCI Host Controller
May 25 08:54:56 kernel: [ 1.437551] usb usb4: Manufacturer: Linux
2.6.32-5-486 uhci_hcd
May 25 08:54:56 kernel: [ 1.437554] usb usb4: SerialNumber: 0000:00:1d.2
May 25 08:54:56 kernel: [ 1.437673] usb usb4: configuration #1 chosen from 1
choice
May 25 08:54:56 kernel: [ 1.437750] hub 4-0:1.0: USB hub found
May 25 08:54:56 kernel: [ 1.437758] hub 4-0:1.0: 2 ports detected
May 25 08:54:56 kernel: [ 1.441087] ata_piix 0000:00:1f.1: version 2.13
May 25 08:54:56 kernel: [ 1.441100] ata_piix 0000:00:1f.1: enabling device
(0005 -> 0007)
May 25 08:54:56 kernel: [ 1.441107] ata_piix 0000:00:1f.1: PCI INT A ->
Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
May 25 08:54:56 kernel: [ 1.441152] ata_piix 0000:00:1f.1: setting latency
timer to 64
May 25 08:54:56 kernel: [ 1.443042] thermal LNXTHERM:02: registered as
thermal_zone1
May 25 08:54:56 kernel: [ 1.443052] ACPI: Thermal Zone [TZ2] (48 C)
May 25 08:54:56 kernel: [ 1.448045] scsi0 : ata_piix
May 25 08:54:56 kernel: [ 1.451933] scsi1 : ata_piix
May 25 08:54:56 kernel: [ 1.452816] ata1: PATA max UDMA/100 cmd 0x1f0 ctl
0x3f6 bmdma 0x3c20 irq 14
May 25 08:54:56 kernel: [ 1.452820] ata2: PATA max UDMA/100 cmd 0x170 ctl
0x376 bmdma 0x3c28 irq 15
May 25 08:54:56 kernel: [ 1.461167] thermal LNXTHERM:03: registered as
thermal_zone2
May 25 08:54:56 kernel: [ 1.461177] ACPI: Thermal Zone [TZ3] (16 C)
May 25 08:54:56 kernel: [ 1.528585] yenta_cardbus 0000:02:06.0: ISA IRQ mask
0x0038, PCI irq 10
May 25 08:54:56 kernel: [ 1.528589] yenta_cardbus 0000:02:06.0: Socket
status: 30000006
May 25 08:54:56 kernel: [ 1.528597] yenta_cardbus 0000:02:06.0: pcmcia:
parent PCI bridge I/O window: 0x4000 - 0x5fff
May 25 08:54:56 kernel: [ 1.528602] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0x4000-0x5fff: clean.
May 25 08:54:56 kernel: [ 1.529160] yenta_cardbus 0000:02:06.0: pcmcia:
parent PCI bridge Memory window: 0x90000000 - 0x902fffff
May 25 08:54:56 kernel: [ 1.529164] yenta_cardbus 0000:02:06.0: pcmcia:
parent PCI bridge Memory window: 0x40000000 - 0x4dffffff
May 25 08:54:56 kernel: [ 1.529662] yenta_cardbus 0000:02:06.1: CardBus
bridge found [103c:0890]
May 25 08:54:56 kernel: [ 1.616439] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE
GCC-4243N, 1.08, max MWDMA2
May 25 08:54:56 kernel: [ 1.632549] ata2.00: configured for MWDMA2
May 25 08:54:56 kernel: [ 1.632670] ata1.00: ATA-6: FUJITSU MHT2040AH PL,
006C, max UDMA/100
May 25 08:54:56 kernel: [ 1.632674] ata1.00: 78140160 sectors, multi 16: LBA
May 25 08:54:56 kernel: [ 1.664452] ata1.00: configured for UDMA/100
May 25 08:54:56 kernel: [ 1.664577] scsi 0:0:0:0: Direct-Access ATA FUJITSU
MHT2040A 006C PQ: 0 ANSI: 5
May 25 08:54:56 kernel: [ 1.669375] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD
GCC-4243N 1.08 PQ: 0 ANSI: 5
May 25 08:54:56 kernel: [ 1.723241] fan PNP0C0B:00: registered as
cooling_device0
May 25 08:54:56 kernel: [ 1.723248] ACPI: Fan [C206] (off)
May 25 08:54:56 kernel: [ 1.723562] fan PNP0C0B:01: registered as
cooling_device1
May 25 08:54:56 kernel: [ 1.723568] ACPI: Fan [C207] (off)
May 25 08:54:56 kernel: [ 1.723879] fan PNP0C0B:02: registered as
cooling_device2
May 25 08:54:56 kernel: [ 1.723886] ACPI: Fan [C208] (off)
May 25 08:54:56 kernel: [ 1.730221] fan PNP0C0B:03: registered as
cooling_device3
May 25 08:54:56 kernel: [ 1.730228] ACPI: Fan [C209] (off)
May 25 08:54:56 kernel: [ 1.735222] sd 0:0:0:0: [sda] 78140160 512-byte
logical blocks: (40.0 GB/37.2 GiB)
May 25 08:54:56 kernel: [ 1.735281] sd 0:0:0:0: [sda] Write Protect is off
May 25 08:54:56 kernel: [ 1.735285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
May 25 08:54:56 kernel: [ 1.735309] sd 0:0:0:0: [sda] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
May 25 08:54:56 kernel: [ 1.735458] sda:sr0: scsi3-mmc drive: 24x/24x writer
cd/rw xa/form2 cdda tray
May 25 08:54:56 kernel: [ 1.747766] Uniform CD-ROM driver Revision: 3.20
May 25 08:54:56 kernel: [ 1.748064] sr 1:0:0:0: Attached scsi CD-ROM sr0
May 25 08:54:56 kernel: [ 1.779197] sda1 sda2 sda3 sda4
May 25 08:54:56 kernel: [ 1.796785] yenta_cardbus 0000:02:06.1: ISA IRQ mask
0x0038, PCI irq 10
May 25 08:54:56 kernel: [ 1.796789] yenta_cardbus 0000:02:06.1: Socket
status: 30000006
May 25 08:54:56 kernel: [ 1.796794] pci_bus 0000:02: Raising subordinate
bus# of parent bus (#02) from #05 to #08
May 25 08:54:56 kernel: [ 1.796805] yenta_cardbus 0000:02:06.1: pcmcia:
parent PCI bridge I/O window: 0x4000 - 0x5fff
May 25 08:54:56 kernel: [ 1.796810] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0x4000-0x5fff: clean.
May 25 08:54:56 kernel: [ 1.797369] yenta_cardbus 0000:02:06.1: pcmcia:
parent PCI bridge Memory window: 0x90000000 - 0x902fffff
May 25 08:54:56 kernel: [ 1.797373] yenta_cardbus 0000:02:06.1: pcmcia:
parent PCI bridge Memory window: 0x40000000 - 0x4dffffff
May 25 08:54:56 kernel: [ 1.797596] sd 0:0:0:0: [sda] Attached SCSI disk
May 25 08:54:56 kernel: [ 1.806211] yenta_cardbus 0000:02:06.3: CardBus
bridge found [103c:0890]
May 25 08:54:56 kernel: [ 1.806912] sd 0:0:0:0: Attached scsi generic sg0
type 0
May 25 08:54:56 kernel: [ 1.807286] sr 1:0:0:0: Attached scsi generic sg1
type 5
May 25 08:54:56 kernel: [ 1.932656] yenta_cardbus 0000:02:06.3: ISA IRQ mask
0x0038, PCI irq 10
May 25 08:54:56 kernel: [ 1.932661] yenta_cardbus 0000:02:06.3: Socket
status: 30000006
May 25 08:54:56 kernel: [ 1.932667] pci_bus 0000:02: Raising subordinate
bus# of parent bus (#02) from #08 to #0c
May 25 08:54:56 kernel: [ 1.932679] yenta_cardbus 0000:02:06.3: pcmcia:
parent PCI bridge I/O window: 0x4000 - 0x5fff
May 25 08:54:56 kernel: [ 1.932684] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0x4000-0x5fff: clean.
May 25 08:54:56 kernel: [ 1.933244] yenta_cardbus 0000:02:06.3: pcmcia:
parent PCI bridge Memory window: 0x90000000 - 0x902fffff
May 25 08:54:56 kernel: [ 1.933248] yenta_cardbus 0000:02:06.3: pcmcia:
parent PCI bridge Memory window: 0x40000000 - 0x4dffffff
May 25 08:54:56 kernel: [ 2.128037] usb 2-2: new full speed USB device using
uhci_hcd and address 2
May 25 08:54:56 kernel: [ 2.298875] usb 2-2: New USB device found,
idVendor=0a05, idProduct=7211
May 25 08:54:56 kernel: [ 2.298878] usb 2-2: New USB device strings: Mfr=0,
Product=1, SerialNumber=0
May 25 08:54:56 kernel: [ 2.298882] usb 2-2: Product: USB2.0 HUB
May 25 08:54:56 kernel: [ 2.298994] usb 2-2: configuration #1 chosen from 1
choice
May 25 08:54:56 kernel: [ 2.301909] hub 2-2:1.0: USB hub found
May 25 08:54:56 kernel: [ 2.303879] hub 2-2:1.0: 4 ports detected
May 25 08:54:56 kernel: [ 2.716739] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0x100-0x3af: clean.
May 25 08:54:56 kernel: [ 2.718485] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0x3e0-0x4ff: clean.
May 25 08:54:56 kernel: [ 2.719211] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0x820-0x8ff: clean.
May 25 08:54:56 kernel: [ 2.719849] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0xc00-0xcf7: clean.
May 25 08:54:56 kernel: [ 2.720678] pcmcia_socket pcmcia_socket0: cs: IO
port probe 0xa00-0xaff: clean.
May 25 08:54:56 kernel: [ 2.729872] usb 2-2.1: new full speed USB device
using uhci_hcd and address 3
May 25 08:54:56 kernel: [ 2.749994] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0x100-0x3af: clean.
May 25 08:54:56 kernel: [ 2.751915] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0x3e0-0x4ff: clean.
May 25 08:54:56 kernel: [ 2.752705] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0x820-0x8ff: clean.
May 25 08:54:56 kernel: [ 2.753382] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0xc00-0xcf7: clean.
May 25 08:54:56 kernel: [ 2.754233] pcmcia_socket pcmcia_socket1: cs: IO
port probe 0xa00-0xaff: clean.
May 25 08:54:56 kernel: [ 2.799467] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0x100-0x3af: clean.
May 25 08:54:56 kernel: [ 2.801226] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0x3e0-0x4ff: clean.
May 25 08:54:56 kernel: [ 2.801952] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0x820-0x8ff: clean.
May 25 08:54:56 kernel: [ 2.802589] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0xc00-0xcf7: clean.
May 25 08:54:56 kernel: [ 2.803396] pcmcia_socket pcmcia_socket2: cs: IO
port probe 0xa00-0xaff: clean.
May 25 08:54:56 kernel: [ 2.831872] usb 2-2.1: not running at top speed;
connect to a high speed hub
May 25 08:54:56 kernel: [ 2.859868] usb 2-2.1: New USB device found,
idVendor=0781, idProduct=5539
May 25 08:54:56 kernel: [ 2.859873] usb 2-2.1: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
May 25 08:54:56 kernel: [ 2.859876] usb 2-2.1: Product: Cruzer Micro
May 25 08:54:56 kernel: [ 2.859879] usb 2-2.1: Manufacturer: SanDisk
May 25 08:54:56 kernel: [ 2.859881] usb 2-2.1: SerialNumber:
341011144A50F48C
May 25 08:54:56 kernel: [ 2.860001] usb 2-2.1: configuration #1 chosen from
1 choice
May 25 08:54:56 kernel: [ 2.892270] Initializing USB Mass Storage driver...
May 25 08:54:56 kernel: [ 2.896030] scsi2 : SCSI emulation for USB Mass
Storage devices
May 25 08:54:56 kernel: [ 2.896168] usbcore: registered new interface driver
usb-storage
May 25 08:54:56 kernel: [ 2.896171] USB Mass Storage support registered.
May 25 08:54:56 kernel: [ 2.896637] usb-storage: device found at 3
May 25 08:54:56 kernel: [ 2.896640] usb-storage: waiting for device to
settle before scanning
May 25 08:54:56 kernel: [ 3.065885] usb 2-2.2: new low speed USB device
using uhci_hcd and address 4
May 25 08:54:57 kernel: [ 3.203874] usb 2-2.2: New USB device found,
idVendor=15d9, idProduct=0a4c
May 25 08:54:57 kernel: [ 3.203880] usb 2-2.2: New USB device strings:
Mfr=0, Product=1, SerialNumber=0
May 25 08:54:57 kernel: [ 3.203884] usb 2-2.2: Product: USB OPTICAL MOUSE
May 25 08:54:57 kernel: [ 3.204221] usb 2-2.2: configuration #1 chosen from
1 choice
May 25 08:54:57 kernel: [ 3.248305] usbcore: registered new interface driver
hiddev
May 25 08:54:57 kernel: [ 3.262473] input: USB OPTICAL MOUSE as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input1
May 25 08:54:57 kernel: [ 3.262643] generic-usb 0003:15D9:0A4C.0001:
input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on
usb-0000:00:1d.0-2.2/input0
May 25 08:54:57 kernel: [ 3.262674] usbcore: registered new interface driver
usbhid
May 25 08:54:57 kernel: [ 3.262833] usbhid: v2.6:USB HID core driver
May 25 08:54:57 init: starting pid 380, tty '': '/sbin/reopen-console
/sbin/debian-installer'
May 25 08:54:57 init: starting pid 383, tty '/dev/tty4': '/usr/bin/tail -f
/var/log/syslog'
May 25 08:54:57 debconf: Setting debconf/language to en
May 25 08:54:57 main-menu[400]: DEBUG: resolver (libc6-udeb): package
doesn't exist (ignored)
May 25 08:54:57 main-menu[400]: INFO: Menu item 'localechooser' selected
May 25 08:54:58 debconf: Setting debconf/language to en
May 25 08:55:01 kernel: [ 7.897868] usb-storage: device scan complete
May 25 08:55:01 kernel: [ 7.900862] scsi 2:0:0:0: Direct-Access SanDisk
Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS
May 25 08:55:01 kernel: [ 7.901833] sd 2:0:0:0: Attached scsi generic sg2
type 0
May 25 08:55:01 kernel: [ 7.906832] sd 2:0:0:0: [sdb] 7856127 512-byte
logical blocks: (4.02 GB/3.74 GiB)
May 25 08:55:01 kernel: [ 7.909834] sd 2:0:0:0: [sdb] Write Protect is off
May 25 08:55:01 kernel: [ 7.909839] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00
08
May 25 08:55:01 kernel: [ 7.909842] sd 2:0:0:0: [sdb] Assuming drive cache:
write through
May 25 08:55:01 kernel: [ 7.921822] sd 2:0:0:0: [sdb] Assuming drive cache:
write through
May 25 08:55:01 kernel: [ 7.921827] sdb: sdb1
May 25 08:55:01 kernel: [ 7.939824] sd 2:0:0:0: [sdb] Assuming drive cache:
write through
May 25 08:55:01 kernel: [ 7.939829] sd 2:0:0:0: [sdb] Attached SCSI
removable disk
May 25 08:55:02 localechooser: info: Language = 'it'
May 25 08:55:02 localechooser: info: line=it;1;IT;it_IT.UTF-8;;console-setup
May 25 08:55:02 localechooser: info: Set debian-installer/language = 'it'
May 25 08:55:02 localechooser: info: Default country = 'IT'
May 25 08:55:02 localechooser: info: Default locale = 'it_IT.UTF-8'
May 25 08:55:02 localechooser: info: Set debian-installer/consoledisplay =
'console-setup'
May 25 08:55:02 debconf: Setting debconf/language to it
May 25 08:55:02 localechooser: info: Set debian-installer/country = 'IT'
May 25 08:55:02 localechooser: info: Set debian-installer/locale =
'it_IT.UTF-8'
May 25 08:55:02 localechooser: info: System locale (debian-installer/locale)
= 'it_IT.UTF-8'
May 25 08:55:02 main-menu[400]: DEBUG: resolver (libc6-udeb): package
doesn't exist (ignored)
May 25 08:55:02 main-menu[400]: INFO: Menu item 'kbd-chooser' selected
May 25 08:55:02 main-menu[400]: INFO: Falling back to the package
description for console-keymaps-at
May 25 08:55:02 main-menu[400]: INFO: Falling back to the package
description for console-keymaps-at
May 25 08:55:02 kbd-chooser[1178]: DEBUG: Mounting usbfs to look for kbd
May 25 08:55:02 kbd-chooser[1178]: DEBUG: Parsing usb/devices file
May 25 08:55:02 kbd-chooser[1178]: DEBUG: Adding generic entry for AT
keymaps
May 25 08:55:02 kbd-chooser[1178]: INFO: keyboard type at: present: true:
May 25 08:55:02 kbd-chooser[1178]: INFO: keyboard type at: present: unknown
May 25 08:55:02 kbd-chooser[1178]: INFO: Setting
debian-installer/serial-console to false
May 25 08:55:02 kbd-chooser[1178]: INFO: Setting
debian-installer/uml-console to false
May 25 08:55:02 kbd-chooser[1178]: INFO: kbd-chooser: arch at selected
May 25 08:55:03 kbd-chooser[1178]: INFO: choose_keymap: keymap = it
May 25 08:55:03 kbd-chooser[1178]: INFO: kbd_chooser: setting keymap it
May 25 08:55:03 main-menu[400]: DEBUG: resolver (libc6-udeb): package
doesn't exist (ignored)
May 25 08:55:03 main-menu[400]: INFO: Menu item 'cdrom-detect' selected
May 25 08:55:03 net/hw-detect.hotplug: Detected hotpluggable network
interface lo
May 25 08:55:03 hw-detect: ISA bus detected; loading module 'ide-generic'
May 25 08:55:03 hw-detect: insmod
/lib/modules/2.6.32-5-486/kernel/drivers/ide/ide-core.ko
May 25 08:55:03 hw-detect: insmod
/lib/modules/2.6.32-5-486/kernel/drivers/ide/ide-generic.ko
May 25 08:55:03 kernel: [ 10.120286] Uniform Multi-Platform E-IDE driver
May 25 08:55:03 kernel: [ 10.121064] ide_generic: please use
"probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
May 25 08:55:03 hw-detect: Detected PCMCIA, installing pcmciautils.
May 25 08:55:03 apt-install: Queueing package pcmciautils for later
installation
May 25 08:55:03 apt-install: Queueing package udev for later installation
May 25 08:55:03 apt-install: Queueing package pciutils for later
installation
May 25 08:55:03 apt-install: Queueing package usbutils for later
installation
May 25 08:55:03 apt-install: Queueing package acpi for later installation
May 25 08:55:03 apt-install: Queueing package acpid for later installation
May 25 08:55:03 apt-install: Queueing package acpi-support-base for later
installation
May 25 08:55:04 apt-install: Queueing package eject for later installation
May 25 08:55:04 apt-install: Queueing package libc6-i686 for later
installation
May 25 08:55:05 check-missing-firmware: no missing firmware in
/dev/.udev/firmware-missing
May 25 08:55:05 cdrom-detect: Searching for Debian installation media...
May 25 08:55:05 cdrom-detect: Devices: '/dev/sr0'
May 25 08:55:05 cdrom-detect: CD-ROM mount failed: device=/dev/sr0
fstype=iso9660
May 25 08:55:05 kernel: [ 11.442794] mount: sending ioctl 5310 to a
partition!
May 25 08:55:05 kernel: [ 11.442799] mount: sending ioctl 5310 to a
partition!
May 25 08:55:05 kernel: [ 11.448788] ISO 9660 Extensions: Microsoft Joliet
Level 3
May 25 08:55:05 cdrom-detect: CD-ROM mount succeeded: device=/dev/sdb1
fstype=iso9660
May 25 08:55:05 kernel: [ 11.457788] ISO 9660 Extensions: RRIP_1991A
May 25 08:55:05 cdrom-detect: Detected CD 'Debian GNU/Linux 6.0.5
"Squeeze" - Official i386 NETINST Binary-1 20120512-20:43'
May 25 08:55:06 cdrom-detect: Detected CD with 'stable' (squeeze)
distribution
May 25 08:55:06 anna-install: Queueing udeb eject-udeb for later
installation
May 25 08:55:06 anna-install: Queueing udeb apt-mirror-setup for later
installation
May 25 08:55:06 anna-install: Queueing udeb apt-cdrom-setup for later
installation
May 25 08:55:06 anna-install: Queueing udeb squeeze-support for later
installation
May 25 08:55:06 main-menu[400]: (process:1204): mount: mounting /dev/sr0 on
/cdrom failed: No medium found
May 25 08:55:06 main-menu[400]: DEBUG: resolver (libc6-udeb): package
doesn't exist (ignored)
May 25 08:55:06 main-menu[400]: INFO: Menu item 'load-cdrom' selected
May 25 08:55:06 cdrom-retriever: warning: Unable to find
contrib/debian-installer/binary-i386/Packages in
/cdrom/dists/squeeze/Release.
May 25 08:55:06 cdrom-retriever: warning: Unable to find
contrib/debian-installer/binary-i386/Packages.gz in
/cdrom/dists/squeeze/Release.
May 25 08:55:06 anna[2157]: DEBUG: resolver (fat-modules): package doesn't
exist (ignored)
May 25 08:55:06 anna[2157]: DEBUG: resolver (ufsutils-udeb): package doesn't
exist (ignored)
May 25 08:55:06 anna[2157]: DEBUG: resolver (fat-modules): package doesn't
exist (ignored)
May 25 08:55:06 anna[2157]: DEBUG: resolver (ufsutils-udeb): package doesn't
exist (ignored)
May 25 08:55:06 anna[2157]: DEBUG: retrieving apt-cdrom-setup
1:0.53+squeeze2
May 25 08:55:07 anna[2157]: DEBUG: retrieving apt-mirror-setup
1:0.53+squeeze2
May 25 08:55:07 anna[2157]: DEBUG: retrieving apt-setup-udeb 1:0.53+squeeze2
May 25 08:55:07 anna[2157]: DEBUG: retrieving base-installer 1.115+squeeze1
May 25 08:55:07 anna[2157]: DEBUG: retrieving bootstrap-base 1.115+squeeze1
May 25 08:55:08 anna[2157]: DEBUG: retrieving btrfs-tools-udeb
0.19+20100601-3
May 25 08:55:08 anna[2157]: DEBUG: retrieving choose-mirror-bin 2.37
May 25 08:55:08 anna[2157]: DEBUG: retrieving clock-setup 0.106
May 25 08:55:09 anna[2157]: DEBUG: retrieving debian-archive-keyring-udeb
2010.08.28
May 25 08:55:09 anna[2157]: DEBUG: retrieving di-utils-mapdevfs
1.82+squeeze1
May 25 08:55:09 anna[2157]: DEBUG: retrieving debootstrap-udeb
1.0.26+squeeze1
May 25 08:55:09 anna[2157]: DEBUG: retrieving e2fsprogs-udeb
1.41.12-4stable1
May 25 08:55:09 anna[2157]: DEBUG: retrieving libc6-udeb 2.11.3-3
May 25 08:55:10 anna[2157]: DEBUG: retrieving eject-udeb
2.1.5+deb1+cvs20081104-7.1
May 25 08:55:10 anna[2157]: DEBUG: retrieving elilo-installer 1.18
May 25 08:55:11 anna[2157]: DEBUG: retrieving finish-install 2.28squeeze1
May 25 08:55:11 anna[2157]: DEBUG: retrieving gpgv-udeb 1.4.10-4
May 25 08:55:11 anna[2157]: DEBUG: retrieving grub-installer 1.60+squeeze3
May 25 08:55:12 anna[2157]: DEBUG: retrieving disk-detect 1.84+squeeze2
May 25 08:55:12 anna[2157]: DEBUG: retrieving ethdetect 1.84+squeeze2
May 25 08:55:13 anna[2157]: DEBUG: retrieving jfsutils-udeb 1.1.12-2.1
May 25 08:55:13 anna[2157]: DEBUG: retrieving kickseed-common 0.55
May 25 08:55:13 anna[2157]: DEBUG: retrieving lilo-installer 1.34
May 25 08:55:14 anna[2157]: DEBUG: retrieving btrfs-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving efi-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving ext2-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving ext3-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving ext4-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving jfs-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving loop-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:14 anna[2157]: DEBUG: retrieving md-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:15 anna[2157]: DEBUG: retrieving
nic-extra-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:16 anna[2157]: DEBUG: retrieving nic-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:17 anna[2157]: DEBUG: retrieving
nic-pcmcia-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:17 anna[2157]: DEBUG: retrieving
nic-shared-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:17 anna[2157]: DEBUG: retrieving
nic-usb-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:17 anna[2157]: DEBUG: retrieving
nic-wireless-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:18 anna[2157]: DEBUG: retrieving
scsi-extra-modules-2.6.32-5-486-di 1.99+squeeze7
May 25 08:55:19 anna[2157]: DEBUG: retrieving ufs-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:19 anna[2157]: DEBUG: retrieving xfs-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:19 anna[2157]: DEBUG: retrieving zlib-modules-2.6.32-5-486-di
1.99+squeeze7
May 25 08:55:19 anna[2157]: DEBUG: retrieving ntfsprogs-udeb 2.0.0-1+b1
May 25 08:55:19 anna[2157]: DEBUG: retrieving libdevmapper1.02.1-udeb
2:1.02.48-5
May 25 08:55:20 anna[2157]: DEBUG: retrieving libbsd0-udeb 0.2.0-1
May 25 08:55:20 anna[2157]: DEBUG: retrieving mdadm-udeb
3.1.4-1+8efb9d1+squeeze1
May 25 08:55:20 anna[2157]: DEBUG: retrieving netcfg 1.59
May 25 08:55:21 anna[2157]: DEBUG: retrieving nobootloader 1.29
May 25 08:55:21 anna[2157]: DEBUG: retrieving os-prober-udeb 1.42
May 25 08:55:21 anna[2157]: DEBUG: retrieving partconf-find-partitions
1.36squeeze1
May 25 08:55:21 anna[2157]: DEBUG: retrieving libparted0-udeb 2.3-5
May 25 08:55:21 anna[2157]: DEBUG: retrieving partman-auto-raid 18
May 25 08:55:22 anna[2157]: DEBUG: retrieving partman-auto 96
May 25 08:55:23 anna[2157]: DEBUG: retrieving partman-base 147
May 25 08:55:23 anna[2157]: DEBUG: retrieving partman-utils 147
May 25 08:55:23 anna[2157]: DEBUG: retrieving partman-basicfilesystems 69
May 25 08:55:24 anna[2157]: DEBUG: retrieving partman-basicmethods 47
May 25 08:55:25 anna[2157]: DEBUG: retrieving partman-btrfs 5
May 25 08:55:25 anna[2157]: DEBUG: retrieving partman-efi 23
May 25 08:55:26 anna[2157]: DEBUG: retrieving partman-ext3 62
May 25 08:55:27 anna[2157]: DEBUG: retrieving partman-jfs 33
May 25 08:55:27 anna[2157]: DEBUG: retrieving partman-md 56
May 25 08:55:28 anna[2157]: DEBUG: retrieving partman-partitioning 79
May 25 08:55:29 anna[2157]: DEBUG: retrieving partman-target 72+squeeze1
May 25 08:55:30 anna[2157]: DEBUG: retrieving partman-ufs 7
May 25 08:55:31 anna[2157]: DEBUG: retrieving partman-xfs 47
May 25 08:55:32 anna[2157]: DEBUG: retrieving pkgsel 0.33
May 25 08:55:33 anna[2157]: DEBUG: retrieving network-preseed 1.48
May 25 08:55:33 anna[2157]: DEBUG: retrieving rdate-udeb 1:1.2-4
May 25 08:55:33 anna[2157]: DEBUG: retrieving tzsetup-udeb 1:0.33
May 25 08:55:34 anna[2157]: DEBUG: retrieving user-setup-udeb 1.38
May 25 08:55:35 anna[2157]: DEBUG: retrieving fdisk-udeb 2.17.2-9
May 25 08:55:35 anna[2157]: DEBUG: retrieving libiw30-udeb 30~pre9-5
May 25 08:55:35 anna[2157]: DEBUG: retrieving xfsprogs-udeb 3.1.4
May 25 08:55:37 main-menu[400]: INFO: Menu item 'ethdetect' selected
May 25 08:55:37 net/hw-detect.hotplug: Detected hotpluggable network
interface lo
May 25 08:55:37 kernel: [ 44.041798] tg3.c:v3.116 (December 3, 2010)
May 25 08:55:37 kernel: [ 44.043164] ACPI: PCI Interrupt Link [C0C6] enabled
at IRQ 11
May 25 08:55:37 kernel: [ 44.043170] tg3 0000:02:0e.0: PCI INT A ->
Link[C0C6] -> GSI 11 (level, low) -> IRQ 11
May 25 08:55:37 kernel: [ 44.051360] cfg80211: Using static regulatory
domain info
May 25 08:55:37 kernel: [ 44.051363] cfg80211: Regulatory domain: US
May 25 08:55:37 kernel: [ 44.051365] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
May 25 08:55:37 kernel: [ 44.051369] (2402000 KHz - 2472000 KHz @ 40000
KHz), (600 mBi, 2700 mBm)
May 25 08:55:37 kernel: [ 44.051373] (5170000 KHz - 5190000 KHz @ 40000
KHz), (600 mBi, 2300 mBm)
May 25 08:55:37 kernel: [ 44.051377] (5190000 KHz - 5210000 KHz @ 40000
KHz), (600 mBi, 2300 mBm)
May 25 08:55:37 kernel: [ 44.051380] (5210000 KHz - 5230000 KHz @ 40000
KHz), (600 mBi, 2300 mBm)
May 25 08:55:37 kernel: [ 44.051384] (5230000 KHz - 5330000 KHz @ 40000
KHz), (600 mBi, 2300 mBm)
May 25 08:55:37 kernel: [ 44.051387] (5735000 KHz - 5835000 KHz @ 40000
KHz), (600 mBi, 3000 mBm)
May 25 08:55:37 kernel: [ 44.051730] cfg80211: Calling CRDA for country: US
May 25 08:55:38 kernel: [ 44.106962] tg3 0000:02:0e.0: eth0: Tigon3
[partno(BMC5705mA3) rev 3003] (PCI:33MHz:32-bit) MAC address
00:08:02:de:b5:09
May 25 08:55:38 kernel: [ 44.106968] tg3 0000:02:0e.0: eth0: attached PHY is
5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
May 25 08:55:38 kernel: [ 44.106972] tg3 0000:02:0e.0: eth0: RXcsums[1]
LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
May 25 08:55:38 kernel: [ 44.106976] tg3 0000:02:0e.0: eth0:
dma_rwctrl[763f0000] dma_mask[64-bit]
May 25 08:55:38 kernel: [ 44.107461] ACPI: PCI Interrupt Link [C0C7] enabled
at IRQ 11
May 25 08:55:38 kernel: [ 44.107466] ath5k 0000:02:04.0: PCI INT A ->
Link[C0C7] -> GSI 11 (level, low) -> IRQ 11
May 25 08:55:38 kernel: [ 44.107524] ath5k 0000:02:04.0: registered as
'phy0'
May 25 08:55:38 net/hw-detect.hotplug: Detected hotpluggable network
interface eth0
May 25 08:55:38 kernel: [ 44.390488] ath: EEPROM regdomain: 0x60
May 25 08:55:38 kernel: [ 44.390492] ath: EEPROM indicates we should expect
a direct regpair map
May 25 08:55:38 kernel: [ 44.390497] ath: Country alpha2 being used: 00
May 25 08:55:38 kernel: [ 44.390499] ath: Regpair used: 0x60
May 25 08:55:38 kernel: [ 44.406912] phy0: Selected rate control algorithm
'minstrel'
May 25 08:55:38 kernel: [ 44.407700] Registered led device: ath5k-phy0::rx
May 25 08:55:38 kernel: [ 44.407719] Registered led device: ath5k-phy0::tx
May 25 08:55:38 kernel: [ 44.407724] ath5k phy0: Atheros AR5212 chip found
(MAC: 0x56, PHY: 0x41)
May 25 08:55:38 kernel: [ 44.407727] ath5k phy0: RF5111 5GHz radio found
(0x17)
May 25 08:55:38 kernel: [ 44.407730] ath5k phy0: RF2111 2GHz radio found
(0x23)
May 25 08:55:38 net/hw-detect.hotplug: Detected hotpluggable network
interface wlan0
May 25 08:55:39 check-missing-firmware: no missing firmware in
/dev/.udev/firmware-missing
May 25 08:55:40 kernel: [ 46.330056] tg3 0000:02:0e.0: firmware: requesting
tigon/tg3_tso5.bin
May 25 08:55:40 kernel: [ 46.332393] tg3 0000:02:0e.0: eth0: Failed to load
firmware "tigon/tg3_tso5.bin"
May 25 08:55:40 kernel: [ 46.332397] tg3 0000:02:0e.0: eth0: TSO capability
disabled
May 25 08:55:40 kernel: [ 46.469480] ADDRCONF(NETDEV_UP): eth0: link is not
ready
May 25 08:55:40 kernel: [ 46.904401] tg3 0000:02:0e.0: PME# enabled
May 25 08:55:40 kernel: [ 46.904423] pci 0000:00:1e.0: wake-up capability
enabled by ACPI
May 25 08:55:40 kernel: [ 46.977236] ADDRCONF(NETDEV_UP): wlan0: link is not
ready
May 25 08:55:41 check-missing-firmware: missing firmware files
(tigon/tg3_tso5.bin) for tg3
May 25 08:55:49 check-missing-firmware: installing firmware package
/cdrom/firmware/firmware-linux-nonfree_0.28+squeeze1_all.deb
May 25 08:55:52 kernel: [ 58.939665] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
May 25 08:55:52 kernel: [ 58.953486] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
May 25 08:56:13 init: starting pid 382, tty '/dev/tty3': '-/bin/sh'
May 25 08:56:31 kernel: [ 98.174285] end_request: I/O error, dev fd0, sector
0
May 25 08:57:10 kernel: [ 136.278272] end_request: I/O error, dev fd0,
sector 0
May 25 08:57:10 kernel: [ 136.278292] attempt to access beyond end of device
May 25 08:57:10 kernel: [ 136.278296] fd0: rw=0, want=66, limit=8
May 25 08:57:10 kernel: [ 136.278300] isofs_fill_super: bread failed,
dev=fd0, iso_blknum=16, block=32
May 25 08:57:24 kernel: [ 150.949687] EXT2-fs warning: mounting unchecked
fs, running e2fsck is recommended
May 25 08:57:48 kernel: [ 174.382280] end_request: I/O error, dev fd0,
sector 0
May 25 08:58:26 kernel: [ 212.486264] end_request: I/O error, dev fd0,
sector 0
May 25 08:58:26 kernel: [ 212.486276] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
May 25 08:59:04 kernel: [ 250.598077] end_request: I/O error, dev fd0,
sector 0
May 25 08:59:04 kernel: [ 250.598085] FAT: unable to read boot sector
May 25 08:59:42 kernel: [ 288.710054] end_request: I/O error, dev fd0,
sector 0
May 25 09:00:20 kernel: [ 326.815040] end_request: I/O error, dev fd0,
sector 0
May 25 09:00:20 kernel: [ 326.815057] attempt to access beyond end of device
May 25 09:00:20 kernel: [ 326.815060] fd0: rw=0, want=66, limit=8
May 25 09:00:20 kernel: [ 326.815064] isofs_fill_super: bread failed,
dev=fd0, iso_blknum=16, block=32
May 25 09:00:58 kernel: [ 364.919027] end_request: I/O error, dev fd0,
sector 0
May 25 09:01:36 kernel: [ 403.026071] end_request: I/O error, dev fd0,
sector 0
May 25 09:01:36 kernel: [ 403.026081] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
May 25 09:02:14 kernel: [ 441.131050] end_request: I/O error, dev fd0,
sector 0
May 25 09:02:14 kernel: [ 441.131057] FAT: unable to read boot sector
May 25 09:02:53 kernel: [ 479.235025] end_request: I/O error, dev fd0,
sector 0
May 25 09:03:31 kernel: [ 517.342063] end_request: I/O error, dev fd0,
sector 0
May 25 09:04:09 kernel: [ 555.447020] end_request: I/O error, dev fd0,
sector 2
May 25 09:04:09 kernel: [ 555.447029] EXT2-fs: unable to read superblock
May 25 09:04:09 kernel: [ 555.449868] mount: sending ioctl 5310 to a
partition!
May 25 09:04:09 kernel: [ 555.449872] mount: sending ioctl 5310 to a
partition!
May 25 09:04:09 kernel: [ 555.869477] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
May 25 09:04:09 kernel: [ 555.881094] mount: sending ioctl 5310 to a
partition!
May 25 09:04:09 kernel: [ 555.881097] mount: sending ioctl 5310 to a
partition!
May 25 09:04:09 kernel: [ 555.902232] FAT: utf8 is not a recommended IO
charset for FAT filesystems, filesystem will be case sensitive!
*/
Reply to: