Re: Re: Driver for (E)ISA Soundcard with YMF719E-S 9749 ZAGA chip
Hi, ( not sure at all if this is going to help )
Look at this:
{ from:
http://www.kernel.org/doc/Documentation/sound/alsa/ALSAConfiguration.txt
}
{
Module snd-opl3sa2
------------------
Module for Yamaha OPL3-SA2/SA3 sound cards.
isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
with isapnp=0, the following options are available:
port - control port # for OPL3-SA chip (0x370)
sb_port - SB port # for OPL3-SA chip (0x220,0x240)
wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
midi_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
fm_port - FM port # for OPL3-SA chip (0x388), -1 = disable
irq - IRQ # for OPL3-SA chip (5,7,9,10)
dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
This module supports multiple cards and ISA PnP. It does not support
autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
The power-management is supported.
}-------------------
You can make a file in /etc/modprobe.d/ with a name like opl.conf ( the
name does not matter, but it must end in .conf )
in it:
options opl3sa2 isapnp=0 port=... etc.
Again, not sure, just trying, I do not have a card like that myself.
Look in dmesg to see what is happening
Look in /proc/interrupts to see if the card is 'alive', by the number of
irq's changing.
--Jasper
Reply to: