Re: monitor detection maybe not working

[Paul Scott <waterhorse@ultrasw.com>]

On 07/01/2011 03:46 PM, Brian wrote:
> On Fri 01 Jul 2011 at 15:19:21 -0700, Paul Scott wrote:
>
> > VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
> > 0mm x 0mm
> >     1024x768       60.0*
> >     800x600        60.3     56.2
> >     848x480        60.0
> >     640x480        59.9
> > My LCD monitor's native resolution is 1280x1024
> xrandr believes VGA-1 is only capable of 1024x768.  Why do you believe
> 1280x1024 is possible?

1.  The monitor keeps telling me it works better at 1280x1024.

2.  ddcprobe gives several 1280x1024 choices.

Thanks,

Paul

> [sudo] password for paul:
> vbe: VESA 3.0 detected.
> oem:
> vendor: NVIDIA Corporation
> product: CR17 Board Chip Rev A3
> memory: 32768kb
> mode: 640x400x256
> mode: 640x480x256
> mode: 800x600x16
> mode: 800x600x256
> mode: 320x200x64k
> mode: 320x200x16m
> mode: 640x480x64k
> mode: 640x480x16m
> mode: 800x600x64k
> mode: 800x600x16m
> edid:
> edid: 1 3
> id: 631e
> eisa: VSC631e
> serial: dadb6101
> manufacture: 34 2006
> input: sync on green, analog signal.
> screensize: 34 27
> gamma: 2.200000
> dpms: RGB, active off, no suspend, no standby
> timing: 720x400@70 Hz (VGA 640x400, IBM)
> timing: 720x400@88 Hz (XGA2)
> timing: 640x480@60 Hz (VGA)
> timing: 640x480@67 Hz (Mac II, Apple)
> timing: 640x480@72 Hz (VESA)
> timing: 640x480@75 Hz (VESA)
> timing: 800x600@60 Hz (VESA)
> timing: 800x600@72 Hz (VESA)
> timing: 800x600@75 Hz (VESA)
> timing: 832x624@75 Hz (Mac II)
> timing: 1024x768@87 Hz Interlaced (8514A)
> timing: 1024x768@70 Hz (VESA)
> timing: 1024x768@75 Hz (VESA)
> timing: 1280x1024@75 (VESA)
> ctiming: 1280x1024@60
> ctiming: 1280x960@60
> ctiming: 1152x864@75
> ctiming: 1024x768@85
> ctiming: 800x600@85
> ctiming: 640x480@85
> dtiming: 1280x1024@70
> monitorserial: QAG063401932
> monitorrange: 30-82, 50-85
> monitorname: VA703-3Serie


--
Paul Scott
Librarian
Southern Arizona Symphony Orchestra