On Sat, Jun 11, 2011 at 3:08 PM, Camaleón
<noelamac@gmail.com> wrote:
On Sat, 11 Jun 2011 14:14:31 +0200, Christian Simo wrote:
> Hi all
>
> Sorry to response let!
Please, keep the replies into the same thread, there is no need to open a
new thread for every post :-)
Sorry for that, I deleted by mistake the previous mails.
> I was busy with my ISP:
>
> please see below the NAT configuration for my Cisco Router done by my
> ISP:
(...)
Christian, having a computer connected to Internet 24 hours 365 days
which provides remote services it can be very risky (and not only for you
or your LAN but the whole of the Internet users) so I think you need
first to get some of the basics about networking and routing to
understand what is this all about and what do you need, at least for
making your first tests.
Thanks for this resume,
in fact, I set up a network using class A
10.0.0.0:
my LAN gateway is 10.0.0.2
n1.kom.co.za and
ns2.kom.co.za are the hostnames for 10.0.0.80 and 10.0.0.82
this two debian machines are my DNS bind server.
Please below the interfaces files congigurations:
iface eth0 inet static
address 10.0.0.80
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.2
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 196.28.80.139 196.28.80.140
dns-search
ns1.kom.co.za ns2.kom.co.za
iface eth0 inet static
address 10.0.0.82
netmask 255.255.255.0
network 10.0.0.0
broadcast 10.0.0.255
gateway 10.0.0.2
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 196.28.80.139 196.28.80.140
dns-search
ns1.kom.co.za ns2.kom.co.za
I dunno how can we help you if we don't know what is your network layout,
what routers/gateways/modems do you have configured at your site and what
tests are you doing right know.
The routers is a Cisco provide by my ISP and I got 4 switch D-LINK on the network.
I said before, I planed to have two DNS server one as primary on 10.0.0.80 and another as slave on 10.0.0.82
my router IP is 41.134.19.89, 10.0.0.80 pointing on 41.134.19.90 with port 53 open and 10.0.0.82 pointing on 41.134.19.91 with ports 53 and 80 open.
See below my primary DNS configuration:
File: /etc/bind/named.conf.local;
zone "
kom.co.za" IN {
type master;
file "/var/cache/bind/
master.kom.co.za";
notify yes;
};
zone "0.0.10.in-addr.arpa" IN {
type master;
file "/var/cache/bind/kom.co.za.inv";
};
File: /var/cache/bind/master.kom.co.za :
$ORIGIN
kom.co.za.
$TTL 861000
@ IN SOA
ns1.kom.co.za.
postmaster.kom.co.za. (
2011061001 ; serial
3600 ; refresh
900 ; retry
1209600 ; expire
13200) ; default_TTL
IN NS
ns1.kom.co.za.
IN NS
ns2.kom.co.za.
IN MX 10
mail.kom.co.za.
ns1 IN A 10.0.0.80
ns2 IN A 10.0.0.82
www IN A 10.0.0.81
sql IN A 10.0.0.81
mail IN A 10.0.0.84
backup IN A 10.0.0.102
ftp IN CNAME www
imap IN CNAME mail
pop IN CNAME mail
pop3 IN CNAME mail
smtp IN CNAME mail
img IN CNAME www
File: /var/cache/bind/kom.co.za.inv
$ORIGIN 0.0.10.in-addr.arpa.
$TTL 864000
@ IN SOA
ns1.kom.co.za.
postmaster.kom.co.za. (
201105311 ; serial
3600 ; refresh
900 ; retry
1209600 ; expire
43200) ; default_TTL
IN NS
ns1.kom.co.za.
IN NS
ns2.kom.co.za.
10.0.0.80. IN PTR
ns1.kom.co.za.
10.0.0.82. IN PTR
ns2.kom.co.za.
10.0.0.101. IN PTR
sql.kom.co.za.
10.0.0.102. IN PTR
backup.kom.co.za.
So please, let's concetrate in one service (dns server or http server or
whatever you prefer) and now that your ISP has configured the routes to
point to your local server you can start with your setup. So choose one
service, configure it and put here any problems you have with that.
Greetings,
--
Camaleón
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: [🔎] pan.2011.06.11.13.08.27@gmail.com" target="_blank">http://lists.debian.org/[🔎] pan.2011.06.11.13.08.27@gmail.com