Re: Ethernet connection
Hi Rodolfo,
> > Camaleón writes:
> >
> >> You can run "/sbin/ifconfig" in the old desktop PC to find out the IP
> >> address in use.
>
>
> >>>From the old desktop:
> >>
> >> # ifconfig
> >> eth0 Link encap:Ethernet HWaddr 00:19:cb:d7:b6:c5
> >> inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
>
>
> Camaleón <noelamac@gmail.com> writes:
>
> >
> > O.k. so your old desktop is not getting any IP ("127.0.0.1" is the
> > loopback address). You have to manually setup one for it.
> >
> > If you need further assintance for configuring your ethernet card on your
> > old desktop, just ask (also, tell us what operating system is running) :-)
>
>
>
> Of course I need further assistance! I have Lenny on old PC and Etch on
> Hyundai.
On your old PC,
ifconfig eth0 192.168.0.3 netmask 255.255.255.0 up
should be sufficient to configure its Network -- afterwards, the
communication with the laptops should work (This command is not
preserved during system restarts -- after each restart, you have to set
again the IP adress & netmask).
Axel
Reply to: