[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Burning CD stuck on sending CUE sheet

On Wed, 27 Oct 2010 23:02:03 +0200, Steven wrote:

>> I would try to use another burning software, re-sit/replace the ATA
>> cable or try with another dvd writer to see if you get any difference.


> I'll see if another cable does the job, but I don't see anything wrong
> with the current one, no sharp bends or anything.

I see you alredy solved this :-)
> Also, this just doesn't seem right to me atm (from kern.log): 
> [1.956571] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray 
> [1.956574] Uniform CD-ROM driver Revision: 3.20 
> [1.956760] sr 2:0:0:0: Attached scsi CD-ROM sr0 
> [1.966828] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray 
> [1.966889] sr 2:0:1:0: Attached scsi CD-ROM sr1 
> At that moment, 2 optical drives are attached to the same cable, a DVD-rom (read-only) and
> the old CD-rw drive.

Nothing wrong here. 

Two optical devices attached, two devices detected ("sr0" and "sr1").



Reply to: