Archos 3 vision + debian 2.6.30-2-686 +usbmount: unsuccessful
Dear friends,
I tried to enter the realm of mp3/mp4-reader utensils.
I bought an archos 3 vision:
http://www.archos.com/products/mp3_players/archos_3/specs.html?country=ng&lang=en
since it seems to work with my debian
Linux lib59-3-82-233-191-86 2.6.30-2-686 #1 SMP Fri Dec 4 00:53:20 UTC
2009 i686 GNU/Linux
I added the usbmount module (hal and pmount were already aboard).
I managed to see an icon once, and dmesg was saying it didn't
like mu utf8 for a FAT system. Nothing much to worry about if
I'm not wrong.
It seems the usb (2) port has something awry --
So some elements of diagnosis:
----------------------------------------------------
lsusb (first try):
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 008: ID 071b:3203 Domain Technologies, Inc.
Bus 001 Device 002: ID 03f0:4117 Hewlett-Packard Printing Support
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The "Domain Technologies, Inc. " is the archos guy.
dmessg (interesting part):
[ 1033.548015] usb 1-3: new high speed USB device using ehci_hcd and
address 6
[ 1033.672013] usb 1-3: device descriptor read/64, error -71
[ 1034.304012] usb 1-3: device not accepting address 6, error -71
[ 1034.416021] usb 1-3: new high speed USB device using ehci_hcd and
address 7
[ 1034.544014] usb 1-3: device descriptor read/64, error -71
[ 1034.772014] usb 1-3: device descriptor read/64, error -71
[ 1034.988012] usb 1-3: new high speed USB device using ehci_hcd and
address 8
[ 1035.035414] usb 1-3: string descriptor 0 read error: -71
[ 1035.035419] usb 1-3: New USB device found, idVendor=071b, idProduct=3203
[ 1035.035423] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1035.035536] usb 1-3: configuration #1 chosen from 1 choice
[ 1035.119892] Initializing USB Mass Storage driver...
[ 1035.120500] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1035.120635] usbcore: registered new interface driver usb-storage
[ 1035.120642] USB Mass Storage support registered.
[ 1035.121105] usb-storage: device found at 8
[ 1035.121109] usb-storage: waiting for device to settle before scanning
[ 1040.124450] usb-storage: device scan complete
[ 1040.456431] scsi 2:0:0:0: Direct-Access Archos3 1.00 PQ: 0 ANSI: 0
[ 1040.460291] sd 2:0:0:0: [sdb] 16023552 512-byte hardware sectors:
(8.20 GB/7.64 GiB)
[ 1040.460298] sd 2:0:0:0: [sdb] Assuming Write Enabled
[ 1040.460301] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1040.511410] sd 2:0:0:0: [sdb] Assuming Write Enabled
[ 1040.511416] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1040.511423] sdb:
[ 1040.512388] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1040.736023] usb 1-3: reset high speed USB device using ehci_hcd and
address 8
[ 1040.804307] usb 1-3: USB disconnect, address 8
[ 1040.804363] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804369] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK
[ 1040.804376] end_request: I/O error, dev sdb, sector 64
[ 1040.804382] Buffer I/O error on device sdb, logical block 8
[ 1040.804390] Buffer I/O error on device sdb, logical block 9
[ 1040.804395] Buffer I/O error on device sdb, logical block 10
[ 1040.804400] Buffer I/O error on device sdb, logical block 11
[ 1040.804405] Buffer I/O error on device sdb, logical block 12
[ 1040.804410] Buffer I/O error on device sdb, logical block 13
[ 1040.804415] Buffer I/O error on device sdb, logical block 14
[ 1040.804420] Buffer I/O error on device sdb, logical block 15
[ 1040.804539] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804544] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK
[ 1040.804550] end_request: I/O error, dev sdb, sector 0
[ 1040.804555] Buffer I/O error on device sdb, logical block 0
[ 1040.804563] Buffer I/O error on device sdb, logical block 1
[ 1040.804594] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804598] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[ 1040.804604] end_request: I/O error, dev sdb, sector 128
[ 1040.804623] sd 2:0:0:0: [sdb] Unhandled error code
[ 1040.804628] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
[ 1040.804633] end_request: I/O error, dev sdb, sector 192
-----------------------------------------------------------
lsusb (later):
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 03f0:4117 Hewlett-Packard Printing Support
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-----------------------------------------------------------
Sometimes, it is recognized at boot time:
[ 17.844026] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 17.980915] usb 1-1: New USB device found, idVendor=071b, idProduct=3203
[ 17.980970] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 17.981022] usb 1-1: Product: Archos3
[ 17.981069] usb 1-1: Manufacturer: ARCHOS
[ 17.981116] usb 1-1: SerialNumber: USBV1.00
[ 17.981271] usb 1-1: configuration #1 chosen from 1 choice
[ 17.981755] hub 1-0:1.0: over-current change on port 5
[ 18.088021] hub 1-0:1.0: over-current change on port 6
[ 18.154180] Initializing USB Mass Storage driver...
[ 18.154546] scsi2 : SCSI emulation for USB Mass Storage devices
[ 18.154750] usbcore: registered new interface driver usb-storage
[ 18.154805] USB Mass Storage support registered.
[ 18.155044] usb-storage: device found at 3
[ 18.155049] usb-storage: waiting for device to settle before scanning
[ 18.192023] hub 1-0:1.0: over-current change on port 7
[ 18.296113] hub 1-0:1.0: over-current change on port 8
[ 23.152204] usb-storage: device scan complete
[ 23.272020] usb 1-1: reset high speed USB device using ehci_hcd and
address 3
[ 23.620008] eth0: no IPv6 routers present
[ 23.808019] usb 1-1: device not accepting address 3, error -71
[ 23.920025] usb 1-1: reset high speed USB device using ehci_hcd and
address 3
[ 24.444015] usb 1-1: device not accepting address 3, error -71
[ 24.556024] usb 1-1: reset high speed USB device using ehci_hcd and
address 3
---------------------------------------------------------------------
So either error -71, either mounted as sdb with error as a result --
Any hint ? I'm in quite of a fix --
Best,
Amities,
Olivier
Reply to: