Configure Fibre Channel HBA on Debian Lenny Sparc

[Sten Ring <sten.ring@bozoka.com>]

Hello!

We have a SunBlade T6300 running a 2.6.26-2-sparc64-smp and equipped
with an Emulex Zephyr-X LightPulse Fibre Channel Host Adapter. I'm
trying to connect to a Sun StoreEdge 3510 with five scsi discs.

Machine seems to detect card an load the lpfc driver:

03: PCI 7700.0: 0c04 Fibre Channel
  [Created at pci.310]
  Unique ID: AJow.gMJ098VXYf0
  Parent ID: Q8Dg.ZhzrP9eGT_A
  SysFS ID: /devices/pci0000:02/0000:02:00.0/0000:03:09.0/0000:77:00.0
  SysFS BusID: 0000:77:00.0
  Hardware Class: storage
  Model: "Emulex Zephyr-X LightPulse Fibre Channel Host Adapter"
  Vendor: pci 0x10df "Emulex Corporation"
  Device: pci 0xfc20 "Zephyr-X LightPulse Fibre Channel Host Adapter"
  SubVendor: pci 0x10df "Emulex Corporation"
  SubDevice: pci 0xfc2e 
  Revision: 0x02
  Driver: "lpfc"
  Driver Modules: "lpfc"
  Memory Range: 0x20300000-0x20301fff (rw,non-prefetchable)
  Memory Range: 0x20302000-0x20303fff (rw,non-prefetchable)
  I/O Ports: 0x4001000-0x40010ff (rw,disabled)
  Memory Range: 0x20340000-0x2037ffff (ro,non-prefetchable,disabled)
  IRQ: 19 (709 event

  Module Alias: "pci:v000010DFd0000FC20sv000010DFsd0000FC2Ebc0Csc0  4i00"
  Driver Info #0:
    Driver Status: lpfc is active
    Driver Activation Cmd: "modprobe lpfc"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #6 (PCI bridge)cat /proc/scsi/scsi

!!! However, the discs appear as five separate devices:

24: SCSI 00.0: 10600 Disk
  [Created at block.234]
  Unique ID: TGKD.v8v+Gwv2mP4
  Parent ID: AJow.gMJ098VXYf0
  SysFS ID: /block/sdb
  SysFS BusID: 0:0:0:0
  SysFS Device Link: /devices/pci0000:02/0000:02:00.0/0000:03:09.0/0000:77:00.0/host0/rport-0:0-0/target0:0:0/0:0:0:0
  Hardware Class: disk
  Model: "FUJITSU MAX3073FCSUN72G"
  Vendor: "FUJITSU"
  Device: "MAX3073FCSUN72G"
  Revision: "1103"
  Serial ID: "000743F04GL0    DUC0P7A04GL0"
  Driver: "lpfc", "sd"
  Driver Modules: "lpfc"
  Device File: /dev/sdb (/dev/sg3)
Device Files: /dev/sdb, /dev/disk/by-id/scsi-3500000e0182a7a60,
/dev/disk/by-path/pci-0000:77:00.0-fc-0x500000e0182a7a62:0x0000000000000000
  Device Number: block 8:16-8:31 (char 21:3)
  Geometry (Logical): CHS 8924/255/63
  Size: 143374738 sectors a 512 bytes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #2 (Fibre Channel)

!!!and so forth up to /dev/sdf.

I thougth I needed to create an iscsi-target and a LUN so I've been
messing around with iscsitarget, ietadm (I couldn't find tgt for my
distro) and so forth without any success.
 
Emulex only supply drivers and firmware as rpm's for i686/amd64.

Now I'm confused and wonder if I'm on the right track at all?

Any help would be appreciated.

-- 
******************************************************************
Sten Ring                 
Bozoka.com Svenska AB
Tegnérgatan 28, 2tr
113 59 Stockholm

Tel 46-8-545 068 07
Mob 46-701-84 84 87
AIM:stenringbozoka

www.bozoka.com
www.multimobil.se