On Wed, Apr 01, 2009 at 11:45:08PM +0200, Bob van der Moezel wrote: > I am trying to bridge a wireless channel with a wired channel (and some KVM > tap/tun channels for virtual servers). My understanding is that bridging of wireless devices is very dependant on the wireless card (chipset) and is not the recommended way to go. Do you really need to bridge, why not just route ! > > /etc/network/interfaces: > ------------------------ > auto lo > iface lo inet loopback > > auto br0 > iface br0 inet static > address 192.168.0.113 > network 192.168.0.0 > netmask 255.255.255.0 > broadcast 192.168.0.255 > gateway 192.168.0.103 > bridge_ports eth0 wlan0 > > auto wlan0 > iface wlan0 inet manual > wpa-ssid MySSID > wpa-psk MyPlaintextPassword > wpa-bridge br0 > wpa-debug-level 1 > > > Network picture > --------------- > Internet wired network > | | > 192.168.0.103 +---+--------------------------------- > --+ > | | eth0 > | > | | | > | > | | + bridge br0 192.168.0.113 + > | > | | | | > | > AP 192.168.0.1 )))))))))))((((((((((((| wlan0 KVM virtual > | > | Servers > | > [snip] > > Thanks, > Bob van der Moezel > > -- "One of the most meaningful things that's happened to me since I've been the governor -- the president -- governor -- president. Oops. Ex-governor. I went to Bethesda Naval Hospital to give a fellow a Purple Heart, and at the same moment I watched him--get a Purple Heart for action in Iraq - and at that same - right after I gave him the Purple Heart, he was sworn in as a citizen of the United States - a Mexican citizen, now a United States citizen." - George W. Bush 01/09/2004 Washington, DC
Attachment:
signature.asc
Description: Digital signature