PCI: Failed to allocate mem resource #6:10000@fe000000 for 0000:01:00.0
debian-user:
I have recently installed debian-500-i386-netinst on a Dell Dimension
XPS T450 machine, and have noticed the following message during boot:
PCI: Failed to allocate mem resource #6:10000@fe000000 for
0000:01:00.0
Is this anything I need to be worried about?
TIA,
David
2009-03-29 11:45:30 dpchrist@p3450 ~
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13)
(waldi@debian.org)
(gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat
Jan 10 18
:29:31 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e6c00 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
[ 0.000000] BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000014000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 320MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 81920) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 81920
[ 0.000000] HighMem 81920 -> 81920
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 81920
[ 0.000000] On node 0 totalpages: 81920
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 608 pages used for memmap
[ 0.000000] Normal zone: 77216 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP 000F6BB0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 040FDBCB, 0028 (r1 PTLTD RSDT 1
PTL 1000
000)
[ 0.000000] ACPI: FACP 040FF78C, 0074 (r1 DELL KUBLAI 20001013
PTL F4
240)
[ 0.000000] ACPI: DSDT 040FDBF3, 1B99 (r1 Intel S2440BX 1
MSFT 1000
004)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
14000000:ebf8
0000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e7000
[ 0.000000] PM: Registered nosave memory: 00000000000e7000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000040fd000 -
00000000040fe000
[ 0.000000] PM: Registered nosave memory: 00000000040fe000 -
00000000040ff000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 -
0000000004100000
[ 0.000000] PM: Registered nosave memory: 00000000040ff000 -
0000000004100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pag
es: 81280
[ 0.000000] Kernel command line: root=/dev/mapper/p3450-root ro quiet
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with
"lapic"
[ 0.000000] mapped APIC to ffffb000 (0128d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 448.975 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.004000] Memory: 313668k/327680k available (1769k kernel code,
13440k rese
rved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xd4800000 - 0xff7fe000 ( 687 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd4000000 ( 320 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084600] Calibrating delay using timer specific routine.. 899.72
BogoMIPS
(lpj=1799441)
[ 0.084783] Security Framework initialized
[ 0.084808] SELinux: Disabled at boot.
[ 0.084825] Capability LSM initialized
[ 0.084903] Mount-cache hash table entries: 512
[ 0.085535] Initializing cgroup subsys ns
[ 0.085553] Initializing cgroup subsys cpuacct
[ 0.085566] Initializing cgroup subsys devices
[ 0.085656] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.085673] CPU: L2 cache: 512K
[ 0.085688] Intel machine check architecture supported.
[ 0.085706] Intel machine check reporting enabled on CPU#0.
[ 0.085760] Checking 'hlt' instruction... OK.
[ 0.101211] SMP alternatives: switching to UP code
[ 0.120007] Freeing SMP alternatives: 16k freed
[ 0.120007] ACPI: Core revision 20080321
[ 0.126067] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.127864] weird, boot CPU (#0) not listedby the BIOS.
[ 0.127878] SMP motherboard not detected.
[ 0.127889] Local APIC not detected. Using dummy APIC emulation.
[ 0.127899] SMP disabled
[ 0.128008] Brought up 1 CPUs
[ 0.128008] Total of 1 processors activated (899.72 BogoMIPS).
[ 0.128008] CPU0 attaching sched-domain:
[ 0.128008] domain 0: span 0
[ 0.128008] groups: 0
[ 0.129091] net_namespace: 660 bytes
[ 0.129136] Booting paravirtualized kernel on bare hardware
[ 0.130367] NET: Registered protocol family 16
[ 0.131866] ACPI: bus type pci registered
[ 0.133083] PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
[ 0.133098] PCI: Using configuration type 1 for base access
[ 0.133175] Setting up standard PCI resources
[ 0.145150] ACPI: EC: Look up EC in DSDT
[ 0.153086] ACPI: Interpreter enabled
[ 0.153102] ACPI: (supports S0 S1 S5)
[ 0.153164] ACPI: Using PIC for interrupt routing
[ 0.169002] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.169655] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug
,
[ 0.169665] * this clock source is slow. Consider trying other clock
sources
[ 0.169742] pci 0000:00:07.3: quirk: region 8000-803f claimed by
PIIX4 ACPI
[ 0.169759] pci 0000:00:07.3: quirk: region 7000-700f claimed by
PIIX4 SMB
[ 0.170157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174865] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
12)
[ 0.175309] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12)
*0, dis
abled.
[ 0.175753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11
12)
[ 0.176269] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11
12)
[ 0.176838] ACPI: Power Resource [PFAN] (on)
[ 0.177126] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.177340] pnp: PnP ACPI init
[ 0.177378] ACPI: bus type pnp registered
[ 0.191439] pnp: PnP ACPI: found 11 devices
[ 0.191453] ACPI: ACPI bus type pnp unregistered
[ 0.191470] PnPBIOS: Disabled by ACPI PNP
[ 0.193356] PCI: Using ACPI for IRQ routing
[ 0.194188] system 00:01: ioport range 0x7000-0x700f has been
reserved
[ 0.194206] system 00:01: ioport range 0x8000-0x803f has been
reserved
[ 0.194229] system 00:01: iomem range 0xfff80000-0xffffffff could not
be rese
rved
[ 0.226943] PCI: Failed to allocate mem resource #6:10000@fe000000
for 0000:0
1:00.0
[ 0.227021] PCI: Bridge: 0000:00:01.0
[ 0.227033] IO window: 9000-9fff
[ 0.227047] MEM window: 0xf6000000-0xf7ffffff
[ 0.227060] PREFETCH window: 0x00000000fc000000-0x00000000fdffffff
[ 0.227188] NET: Registered protocol family 2
[ 0.227666] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.228818] TCP established hash table entries: 16384 (order: 5,
131072 bytes
)
[ 0.229376] TCP bind hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.229917] TCP: Hash tables configured (established 16384 bind
16384)
[ 0.229931] TCP reno registered
[ 0.230340] NET: Registered protocol family 1
[ 0.230865] checking if image is initramfs...<7>Switched to high
resolution m
ode on CPU 0
[ 1.724141] it is
[ 3.433539] Freeing initrd memory: 7171k freed
[ 3.436536] audit: initializing netlink socket (disabled)
[ 3.436593] type=2000 audit(1238350094.436:1): initialized
[ 3.437149] Total HugeTLB memory allocated, 0
[ 3.437527] VFS: Disk quotas dquot_6.5.1
[ 3.437675] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 3.437860] msgmni has been set to 627
[ 3.438448] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 2
53)
[ 3.438467] io scheduler noop registered
[ 3.438477] io scheduler anticipatory registered
[ 3.438487] io scheduler deadline registered
[ 3.438547] io scheduler cfq registered (default)
[ 3.438586] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 3.438693] pci 0000:00:0f.0: Firmware left e100 interrupts enabled;
disablin
g
[ 3.438729] pci 0000:01:00.0: Boot video device
[ 3.440827] isapnp: Scanning for PnP cards...
[ 3.795881] isapnp: No Plug & Play device found
[ 3.814232] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing
enabled
[ 3.814634] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.816764] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.826706] brd: module loaded
[ 3.827296] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at
0x60,0x64 irq
1,12
[ 3.830677] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.830707] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.831657] mice: PS/2 mouse device common for all mice
[ 3.832617] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.832658] rtc0: alarms up to one month, y3k
[ 3.832896] cpuidle: using governor ladder
[ 3.832909] cpuidle: using governor menu
[ 3.832934] No iBFT detected.
[ 3.835214] TCP cubic registered
[ 3.835231] NET: Registered protocol family 17
[ 3.835260] Using IPI No-Shortcut mode
[ 3.836026] registered taskstats version 1
[ 3.836492] rtc_cmos 00:03: setting system clock to 2009-03-29
18:08:15 UTC (
1238350095)
[ 3.837579] Freeing unused kernel memory: 244k freed
[ 3.887914] input: AT Translated Set 2 keyboard as
/class/input/input0
[ 4.318243] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 4.318274] ACPI: Fan [FAN1] (on)
[ 4.351933] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 4.352271] ACPI: ACPI0007:00 is registered as cooling_device1
[ 5.697424] No dock devices found.
[ 6.393297] SCSI subsystem initialized
[ 6.713341] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 6.713358] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.714235] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 6.714252] PCI: setting IRQ 10 as level-triggered
[ 6.714264] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI
10 (lev
el, low) -> IRQ 10
[ 6.738619] e100: eth0: e100_probe: addr 0xf4100000, irq 10, MAC addr
00:02:b
3:18:bb:cf
[ 6.820296] usbcore: registered new interface driver usbfs
[ 6.820433] usbcore: registered new interface driver hub
[ 6.820649] usbcore: registered new device driver usb
[ 7.187433] USB Universal Host Controller Interface driver v3.0
[ 7.188388] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 7.188404] PCI: setting IRQ 9 as level-triggered
[ 7.188416] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI
9 (leve
l, low) -> IRQ 9
[ 7.188455] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 7.188772] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus numbe
r 1
[ 7.188834] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
[ 7.189242] usb usb1: configuration #1 chosen from 1 choice
[ 7.189397] hub 1-0:1.0: USB hub found
[ 7.189440] hub 1-0:1.0: 2 ports detected
[ 7.198190] Floppy drive(s): fd0 is 1.44M
[ 7.198548] libata version 3.00 loaded.
[ 7.215953] FDC 0 is a post-1991 82077
[ 7.292633] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 7.292652] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=
1
[ 7.292665] usb usb1: Product: UHCI Host Controller
[ 7.292676] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 7.292687] usb usb1: SerialNumber: 0000:00:07.2
[ 7.347585] Uniform Multi-Platform E-IDE driver
[ 7.347609] ide: Assuming 33MHz system bus speed for PIO modes;
override with
idebus=xx
[ 7.350925] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI
slot 0000:
00:07.1
[ 7.350971] PIIX4: not 100% native mode: will probe irqs later
[ 7.350999] ide0: BM-DMA at 0x1040-0x1047
[ 7.351025] ide1: BM-DMA at 0x1048-0x104f
[ 7.351042] Probing IDE interface ide0...
[ 7.496377] Marking TSC unstable due to: TSC halts in idle.
[ 7.640219] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive
[ 8.312268] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 8.312555] hda: UDMA/33 mode selected
[ 8.312864] Probing IDE interface ide1...
[ 9.048207] hdc: CD-RW CRX100E, ATAPI CD/DVD-ROM drive
[ 9.720226] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 9.720773] hdc: MWDMA2 mode selected
[ 9.721367] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 9.721467] ide1 at 0x170-0x177,0x376 on irq 15
[ 9.871591] hda: max request size: 128KiB
[ 9.874229] hda: 39876480 sectors (20416 MB) w/418KiB Cache,
CHS=39560/16/63
[ 9.874253] hda: cache flushes not supported
[ 9.874418] hda: hda1 hda2
[ 9.911253] hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache
[ 9.911282] Uniform CD-ROM driver Revision: 3.20
[ 10.361641] device-mapper: uevent: version 1.0.3
[ 10.364513] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18)
initialised: dm-d
evel@redhat.com
[ 25.208537] PM: Starting manual resume from disk
[ 25.370598] kjournald starting. Commit interval 5 seconds
[ 25.370598] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.662376] udevd version 125 started
[ 30.361722] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0
-3.2)
[ 31.690816] input: PC Speaker as /class/input/input1
[ 34.163902] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.419336] Linux agpgart interface v0.103
[ 34.603083] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 34.691111] agpgart: Detected an Intel 440BX Chipset.
[ 34.698374] agpgart: AGP aperture is 64M @ 0xf8000000
[ 34.708871] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 34.964897] input: ImExPS/2 Generic Explorer Mouse as
/class/input/input2
[ 36.371029] parport_pc 00:08: activated
[ 36.371108] parport_pc 00:08: reported by Plug and Play ACPI
[ 36.371209] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 36.518361] Error: Driver 'pcspkr' is already registered, aborting...
[ 37.160624] input: Power Button (FF) as /class/input/input3
[ 37.188969] ACPI: Power Button (FF) [PWRF]
[ 37.639584] Yamaha DS-1 PCI 0000:00:0c.0: enabling device (0104 ->
0106)
[ 37.639685] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI
9 (leve
l, low) -> IRQ 9
[ 37.992096] firmware: requesting yamaha/ds1_dsp.fw
[ 39.131884] firmware request failed: -2
[ 39.132078] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
[ 39.132185] Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error
-2
[ 42.405767] EXT3 FS on dm-1, internal journal
[ 43.121955] loop: module loaded
[ 45.322213] Adding 868344k swap on /dev/mapper/p3450-swap_1.
Priority:-1 ext
ents:1 across:868344k
[ 46.876284] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 51.380134] NET: Registered protocol family 10
[ 51.382433] lo: Disabled Privacy Extensions
[ 62.296051] eth0: no IPv6 routers present
2009-03-29 11:45:32 dpchrist@p3450 ~
$ uname --all
Linux p3450 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
GNU/Linux
2009-03-29 11:45:58 dpchrist@p3450 ~
$ lspci -v
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (
rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (re
v 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: fc000000-fdffffff
Kernel modules: shpchp
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01) (prog-
if 80 [Master])
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size
=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size
=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size
=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size
=1]
I/O ports at 1040 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev
01) (prog
-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 1060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-724F [DS-1
Audio Con
troller] (rev 03)
Subsystem: Intel Corporation Device 5345
Flags: medium devsel, IRQ 9
Memory at f4108000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel modules: snd-ymfpci
00:0f.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (r
ev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter
Flags: bus master, medium devsel, latency 66, IRQ 10
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1000 [size=64]
Memory at f4000000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 20000000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: e100
Kernel modules: eepro100, e100
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
01) (pro
g-if 00 [VGA controller])
Subsystem: 3Dfx Interactive, Inc. Device 1137
Flags: 66MHz, fast devsel, IRQ 11
Memory at f6000000 (32-bit, non-prefetchable) [size=32M]
Memory at fc000000 (32-bit, prefetchable) [size=32M]
I/O ports at 9000 [size=256]
Capabilities: <access denied>
Kernel modules: tdfxfb, i2c-voodoo3
Reply to: