Soundcard not detected after reboot with Lenny
Hi all,
I have a problem with my on-board sound card. I have an Asus A8N-SLI
motherboard with on-board nVidia CK804 AC'97 audio controller. When I
reboot my computer (Lenny) it is not recognised. I get no sound.
When I run `asoundconf list` I get two choices: HDMI and UART. Neither
gives me sound.
Then I run `alsaconf` as root and it offers me three soundcards to
choose from:
hda-intel: ATI Technologies Inc HD48x0 audio
intel8x0: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
mpu401: snd-mpu401
Strange, since I have no extra soundcards in this system. Just what's on
the motherboard. When I pick the nVidia card and let alsaconf finish
configuration I get working sound, but after a reboot the sound is gone
again.
After I fix my sound with alsaconf, running `asoundconf list` only gives
me one option: CK804.
The contents of /etc/modprobe.d/sound:
====
alias snd-card-0 snd-intel8x0
options snd-intel8x0 index=0
====
The contents of /proc/asound/modules before running alsaconf:
====
0 snd_hda_intel
1 snd_mpu401
====
The contents of /proc/asound/modules after running alsaconf:
====
0 snd_intel8x0
====
Output of lspci:
====
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97
Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev a3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev a3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
03:00.0 VGA compatible controller: ATI Technologies Inc Device 944c
03:00.1 Audio device: ATI Technologies Inc HD48x0 audio
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link)
====
Any idea how I can fix this issue and have sound working on boot? It has
always worked fine under Etch.
Thanks in advance,
--
Sander Marechal
http://www.jejik.com
Reply to: