[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Debian testing + xen 3.2.1 + dom0 kernel 2.6.18 + clvm 2.x -> impossible ?



2008/9/30 Peter Van Biesen <peter.vanbiesen@vaph.be>:
> The linux-image-2.6.26-1-xen-686 only works as a domu, not a dom0. For a dom0 you still need a 2.6.18 kernel.
>
> Or are you running a 2.6.26 kernel as a dom0 ? - in which case I'm very interested !

You have right. After I've posted my message I check debian version. I
have dom0 on Etch (2.6.18 kernel).
Sorry for my mistake.

Lenny with linux-image-2.6.26-1-xen-686 kernel not starting.

>
> All my non-xen machines are dist-upgraded. I suspect the 2.6.18 kernel to remain in the repository until a newer dom0 kernel becomes available.
>
> Kindest regards,
>
> Peter.
>
> On Tuesday 30 September 2008 14:39:32 Mariusz Sielicki wrote:
>> 2008/9/30 Peter Van Biesen <peter.vanbiesen@vaph.be>:
>> > Because you can't use a newer kernel as a xen dom0 kernel. The only working dom0 kernel ( at the moment ) is a 2.6.18 afaik.
>>
>>
>> On Lenny I've got linux-image-2.6.26-1-xen-686.
>> Lenny will be stable just a moment, may by its time to dist-upgrade ? :)
>>
>>
>>
>> >
>> > Kindest regards,
>> >
>> > Peter.
>> >
>> > On Tuesday 30 September 2008 13:48:10 Rich Healey wrote:
>> >> Peter Van Biesen wrote:
>> >> > Hi,
>> >> >
>> >> > I'm trying to setup a dom0 starting from a debian testing installation. I installed testing, then installed the 2.6.18 kernel from stable and the hypervisor from testing. After a reboot xen is now up and running. I now want to use clvm. So I install redhat-cluster-suite and clvm. This installs the kernel modules for the 2.6.26 and the 2.6.18 kernel. However, the modules for the 2.6.18 kernel are version 1.3x, while for the 2.6.26 kernel are 2.x . Needless to say, cman will not start.
>> >> >
>> >> > I then tried to compile de kernel module for my 2.6.18 kernel from source using the module-assistant. This fails on lm_interface.h, which is not in the 2.6.18 source tree.
>> >> >
>> >> > Is it really impossible to run clvm 2.x on a dom0 ? Or am i missing something ? Has anybody used clvm with xen ?
>> >> >
>> >> > Kindest regards,
>> >> >
>> >> > Peter.
>> >>
>> >> Why exactly do you want to use the Etch kernel?
>> >>
>> >> --
>> >> Rich Healey - iTReign      \    .''`.   /         healey.rich@gmail.com
>> >> Developer / Systems Admin   \  : :' :  /        healey.rich@itreign.com
>> >> AIM: richohealey33           \ `. `'  /             richo@psych0tik.net
>> >> MSN: bitchohealey@hotmail.com \  `-  / richohealey@hellboundhackers.org
>> >> ?: blackhole.pca.dfn.de: Connection refused
>> >> gpgkeys: HTTP fetch error 7: couldn't connect: Connection refused
>> >>
>> >>
>> >
>> >
>> >
>> > --
>> > Peter Van Biesen
>> > Sysadmin VAPH
>> >
>> > tel: +32 (0) 2 225 85 70
>> > fax: +32 (0) 2 225 85 88
>> > e-mail: peter.vanbiesen@vaph.be
>> > PGP: http://www.vaph.be/pgpkeys
>> >
>> > Opgelet ! De domeinnaam van het Vlaams Agentschap is vanaf heden
>> > vaph.be. Dit betekent dat u uw correspondent kan bereiken via
>> > voornaam.naam@vaph.be. Gelieve aub dit aan te passen in uw adresboek.
>> >
>> > DISCLAIMER
>> > -------------------------------------------------------------------------------
>> > De personeelsleden van het agentschap doen hun best om in e-mails
>> > betrouwbare informatie te geven.
>> > Toch kan niemand rechten doen gelden op basis van deze inhoud.
>> > Als in de e-mail een stellingname voorkomt, is dat niet noodzakelijk het
>> > standpunt van het agentschap.
>> > Rechtsgeldige beslissingen of officiele standpunten worden alleen per
>> > brief toegestuurd.
>> >
>> >
>> > --
>> > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
>> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> >
>> >
>>
>> Best regards.
>> Mariusz Sielicki
>>
>>
>
>
>
> --
> Peter Van Biesen
> Sysadmin VAPH
>
> tel: +32 (0) 2 225 85 70
> fax: +32 (0) 2 225 85 88
> e-mail: peter.vanbiesen@vaph.be
> PGP: http://www.vaph.be/pgpkeys
>
> Opgelet ! De domeinnaam van het Vlaams Agentschap is vanaf heden
> vaph.be. Dit betekent dat u uw correspondent kan bereiken via
> voornaam.naam@vaph.be. Gelieve aub dit aan te passen in uw adresboek.
>
> DISCLAIMER
> -------------------------------------------------------------------------------
> De personeelsleden van het agentschap doen hun best om in e-mails
> betrouwbare informatie te geven.
> Toch kan niemand rechten doen gelden op basis van deze inhoud.
> Als in de e-mail een stellingname voorkomt, is dat niet noodzakelijk het
> standpunt van het agentschap.
> Rechtsgeldige beslissingen of officiele standpunten worden alleen per
> brief toegestuurd.
>


Reply to: