Re: Enabling DMA with new MB (repost)
On Monday 07 April 2008 17:42:27 firstname.lastname@example.org
> > ~$ dmesg | grep IDE
> Could you try that again as dmesg | grep -i IDE please?
> (There may well be some lower case 'ide' info)
FIrst reply was cut off. Here is the whole thing:
~$ dmesg | grep -i IDE
BIOS-provided physical RAM map:
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000
00000000 00000000 00000000 00000000
Boot video device is 0000:01:00.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:00:07.1
VP_IDE: port 0x01f0 already claimed by ide0
VP_IDE: port 0x0170 already claimed by ide1
VP_IDE: neither IDE port enabled (BIOS)
eth0: Identified 8139 chip type 'RTL-8139C'