"Debian" method for bonding & vlan

[Rob Heilman <digger@digger.cc>]

I have seen/used a couple different ways to setup Ethernet bonding and 
subsequently 802.1q vlans on top of the bond.  Just curious if anyone 
knows the "Debian" way of doing this?  Right now I use entries in

/etc/modules
8021q

/etc/modprobe.d/arch/i386
alias bond0 bonding
options bond0 mode=1 miimon=100 primary=eth0

/etc/network/interfaces
auto bond0
iface bond0 inet static
       address 192.168.0.77
       netmask 255.255.255.0
       network 192.168.0.0
       broadcast 192.168.0.255
       gateway 192.168.0.1
       up /sbin/ifenslave bond0 eth1 eth0
auto bond0.20
iface bond0.20 inet static
       address 192.168.1.77
       netmask 255.255.255.0
       network 192.168.1.0
       broadcast 192.168.1.255
       pre-up /sbin/vconfig add bond0 20

but I am always open to other ideas.  More importantly I like to stay in 
the Debian mold as I can for supportability and to avoid surprises 
during upgrades.  If there is a Debian supported method of accomplishing 
the same thing please share.

Thanks.

-rh