Re: ifconfig don't list interfaces
On Sat, Jan 12, 2008 at 08:56:12PM +0100, Paul Csanyi wrote:
> Hello!
>
> ifconfig don't list interfaces on my Debian Etch system.
>
> sudo ifconfig
sudo LANG=en_US.UTF-8 ifconfig
> eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2
> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
> inet6 addr: fe80::2e0:7dff:fefc:1ab2/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:468 (468.0 b)
> Interrupt:10 Base address:0xdc00
>
> eth1 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B0
> inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
> Érvénytelen utasítás
> ^^^^^^^^^^^^^^^^^^^^
>
> This is on hungarian and mean something like:
> invalid command
>
>
> If I run this command again, I get another error message,
> shorter:
>
> $ sudo ifconfig
> eth0 Link encap:Ethernet HWaddr 00:E0:7D:FC:1A:B2
> inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
> Érvénytelen utasítás
> ^^^^^^^^^^^^^^^^^^^^
> invalid command
>
> ans so on. I get the 1. or the 2. message, if I iterate
> this command.
>
> Why this happen?
I do not know. How many card did you have?
> I have changed my ethernet cards today and have
> difficulties with my interfaces because of udev.
>
> udev remarks ethernet cards..
???
> I have besides this another problem.
> I cant set up on my home network dhcp3-server so
> that the dhcp3-server give a fixed address to my
> debian-server system on my DMZ subnet.
Anyway, did you adjusted /etc/udev/rules.d/z25_persistent-net.rules
after changing card?
> The same setup works fine before I remove and
> reconfigure ethernet cards on my gatewai/router.
>
> Any advices will be appreciated!
I hope it helps.
Reply to: