Re: dvgrab doesn't - Thanks for the help
On Tue, Dec 25, 2007 at 09:38:19AM +0100, Florian Kulzer wrote:
> On Mon, Dec 24, 2007 at 22:24:52 -0500, Thomas H. George wrote:
> > With my old system dvgrab controlled my Sony Digital 8 video camera with no
> > problems. I upgraded to a new motherboard and a Athlon 64 processor, Lenny
> > and a linux-image-2.6.22-3-amd64 kernel. The new motherboard does not have
> > a firewire port so I added a pci firewire card (NEC single-chip IEEE 1394
> > controller uPD72874). When I connect the video camera I get the following
> > messages:
> >
> > firewire_core:: phy config: card 0, new root=ffc1, gap_count=5
> > firewire_core: created new fw device fw1 (0 config rom retries)
> >
> > When I next enter the command:
> >
> > dvgrab --format raw --autosplit --size 100 take-
> >
> > I get the response:
> >
> > raw1394 - failed to get handle: no such file or directory
>
> Check if the device node /dev/raw1394 exists and what its permissions
> are. If it does not exist try to run "modprobe raw1394" as root.
Thanks, this fixed the problem though only with the
linux-image-2.6.18-5-amd64 kernel. Initially I tried modprobe raw1394
when using the linux-image-2.6.22-3-amd64 kernel and got a response that
there was no module raw1394. I rebooted to load the backup kernel all
was well.
>
> > I tried changing the command by adding --card 0 and got the same response.
> >
> > Is there some further setup for dvgrab which will solve this problem?
> >
> > Tom George
>
> --
> Regards, | http://users.icfo.es/Florian.Kulzer
> Florian |
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: