[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

wireles /wpa_supplicant - where to start?

Hi,

I'm trying to set myself up on my University's wireless network. I can
successfully connect to my home wireless using:

iwconfig ath0 key 676bd87bc0dd5315f1cd8de794
dhclient ath0

and to unencrypted public access points using:

ifconfig ath0 down
iwconfig ath0 key off
ifconfig ath0 up
iwconfig ath0 ap any
dhclient ath0

However, my University uses WPA, TKIP, PEAP and EAP-MSCHAP v2. I was
advised to try network manager, but I couldn't get either
network-manager-gnome or kdenetwork-manager to work on my laptop
running fluxbox. network-manager-gnome reported that network manager
wasn't running even when it was, and kdenetwork-manager reported that
it could not find any network devices.

I couldn't figure this out, so I removed network manager et al and
installed wpa_supplicant. I read the man page, and wrote the following
wpa_supplicant.conf script:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=tyler

network={
    ssid="SMU_PUBLIC"
    key_mgmt=WPA-EAP IEEE8021X NONE
    pairwise=TKIP
    eap=MSCHAPV2 PEAP
    identity="my-university-user-name"
    password="my-university-password"
}

I've attached the error message for this below. At this point I have
no idea what to do. I don't know if the problem is the
wpa_supplicant.conf, my wireless driver (madwifi), something needed in
interfaces? If anyone can point me in the right direction that would
be great.

Thanks,

Tyler

root:tyler# wpa_supplicant -iath0 -c/etc/wpa_supplicant.conf -d
Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='tyler' (DEPRECATED)
Line 11: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
   id=0 ssid='SMU_PUBLIC'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Interface ath0 set UP - waiting a second for the driver to complete initialization
SIOCGIWRANGE: WE(compiled)=20 WE(source)=13 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:16:cf:1d:c9:e4
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
ctrl_interface_group=1000 (from group name 'tyler')
Added interface ath0
Ignore event for foreign ifindex 6
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 760 bytes of scan results (3 BSSes)
Scan results: 3
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:16:c7:dc:00:e1 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   skip - SSID mismatch
1: 00:16:c7:db:e8:e0 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
2: 00:16:c7:dc:00:a0 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
Try to find non-WPA AP
0: 00:16:c7:dc:00:e1 ssid='' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   skip - SSID mismatch
1: 00:16:c7:db:e8:e0 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - SSID mismatch
2: 00:16:c7:dc:00:a0 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - SSID mismatch
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 1002 bytes of scan results (4 BSSes)
Scan results: 4
Selecting BSS from priority group 0
Try to find WPA-enabled AP

<SNIPPED OUTPUT>

  C-c C-cCTRL-EVENT-TERMINATING - signal 2 received
Removing interface ath0
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
Reply to: