Re: Intel Pro network

[Bonnel Christophe <mage.tophinus@free.fr>]

My first idea, i had such a error with a static ip. The problem came 
from a ctrl+space character I think or such a thing. Clean you 
/etc/network/interfaces with the lines you have for eth0 and rewrite 
them. Then verify if ifconfig eth0 up works.

Second idea, udev may not create eth0 instantly (I doubt). Have you 
tried ifconfig eth0 up at starting, after 5minutes, after 1 hour ?

Third idea, kernel problem. Have you tried another kernel ? If you can, 
try with a Knoppix CD to see if another kernel version works better.

Hope this helps.
Christophe

L.V.Gandhi a écrit :
> On 8/21/07, Wayne Topa <linuxone@intergate.com> wrote:
>   
> > L.V.Gandhi(lvgandhi@gmail.com) is reported to have said:
> >     
> > > I have
> > > 0a:08.0 Ethernet controller: Intel Corporation Intel(R) PRO/100 VE
> > > Network Connection (rev 02)
> > > Its module is getting loaded
> > > lvgvaio:~# lsmod|grep e100
> > > e100                   32232  0
> > > mii                     5344  1 e100
> > > my /etc/network/interfaces is
> > > # This file describes the network interfaces available on your system
> > > # and how to activate them. For more information, see interfaces(5).
> > >
> > > # The loopback network interface
> > > auto lo
> > > iface lo inet loopback
> > >
> > > # The primary network interface
> > > allow-hotplug eth0
> > > #auto eth0
> > > iface eth0 inet dhcp
> > >
> > >       
> > When I don't want my eth0 to come up at bootup, I do the same as you
> > you show above.  When I want it to associate on bootup I do
> >
> > #allow-hotplug eth0
> >
> > auto eth0
> > iface eth0 inet dhcp
> >
> >     
> I tried both methods. But I couldn't succeed.
>
>