Re: hardware temp and gkrellm
Adam Hardy wrote:
Hugo Vanwoerkom on 21/08/07 14:35, wrote:
Adam Hardy wrote:
I set up etch on a new pc and gkrellm can't find any CPU or mobo
monitors for temperature monitoring. My other older system uses mbmon
and hdmon. Is this out of date now?
When I start mbmon on the new box it complains: Starting motherboard
sensor monitoring daemon: No Hardware Monitor found!!
I've got sysfs sensors on the machine although it's not a daemon and
it's not running on my old machine, so I'm wondering if there's
something wrong with that.
That's been in the list several times:
install lm-sensors and run sensors-detect on a VT.
Thanks, Hugo. Guess I used the wrong search terms - I think my synapses
had started cutting out last night.
I have done that now and the CPU temp is available. However mbmon is
still complaining about the same thing as above. I'm tempted to ignore
it although it seems strange.
Interesting, my diary-blog has that I looked at mbmon on 11/26/2004 but
not that I ever ran it.
However now installing it on Sid and running it and then sensors I get:
=============================================================
Script started on Tue 21 Aug 2007 03:57:11 PM CDT
executing /root/.bashrc
/Tue Aug 21-15:57:11SDA5# mbmon
Temp.= 29.0, 0.0, 0.0; Rot.= 998, 4927, 0
Vcore = 1.63, 3.23; Volt. = 2.91, 5.05, 6.08, 5.99, -7.71
Temp.= 29.0, 0.0, 0.0; Rot.= 998, 4891, 0
Vcore = 1.65, 3.23; Volt. = 2.91, 5.05, 6.08, 5.99, -7.71
/Tue Aug 21-15:57:23SDA5# sensors
w83687thf-isa-0290
Adapter: ISA adapter
VCore 1: 1.63 (in0)
in0_min: 0.00 (in0_min)
in0_max: 3.84 (in0_max)
VCore 2: 3.23 (in1)
in1_min: 1.26 (in1_min)
in1_max: 3.34 (in1_max)
+3.3V: 2.91 (in2)
in2_min: 3.73 (in2_min)
in2_max: 2.51 (in2_max)
+5V: 5.05 (in3)
in3_min: 4.01 (in3_min)
in3_max: 2.12 (in3_max)
+12V: 6.08 (in4)
in4_min: 6.02 (in4_min)
in4_max: 9.42 (in4_max)
ERROR: Can't get feature `in5' data!
ERROR: Can't get feature `in5_min' data!
ERROR: Can't get feature `in5_max' data!
ERROR: Can't get feature `in6' data!
ERROR: Can't get feature `in6_min' data!
ERROR: Can't get feature `in6_max' data!
V5SB: 4.95 (in7)
in7_min: 6.29 (in7_min)
in7_max: 5.51 (in7_max)
VBat: 3.06 (in8)
in8_min: 1.95 (in8_min)
in8_max: 4.02 (in8_max)
fan1: 998.00 (fan1)
fan1_min: 2191.00 (fan1_min)
fan1_div: 8.00 (fan1_div)
fan2: 4927.00 (fan2)
fan2_min: 2872.00 (fan2_min)
fan2_div: 2.00 (fan2_div)
fan3: 0.00 (fan3)
fan3_min: 1486.00 (fan3_min)
fan3_div: 4.00 (fan3_div)
temp1: 35.00 (temp1)
temp1_hyst: 92.00 (temp1_hyst)
temp1_over: -78.00 (temp1_over)
sensor1: 1.00 (sensor1)
temp2: 44.50 (temp2)
temp2_hyst: 71.00 (temp2_hyst)
temp2_over: 76.00 (temp2_over)
sensor2: 1.00 (sensor2)
temp3: 29.00 (temp3)
temp3_hyst: 71.00 (temp3_hyst)
temp3_over: 76.00 (temp3_over)
sensor3: 1.00 (sensor3)
ERROR: Can't get feature `vid' data!
ERROR: Can't get feature `vrm' data!
alarms: 71756.00 (alarms)
beep_enable: 1.00 (beep_enable)
beeps: 0.00 (beeps)
/Tue Aug 21-15:57:29SDA5# exit
exit
Script done on Tue 21 Aug 2007 03:57:32 PM CDT
=============================================================
which shows,at least as the temp is concerned that mbmon gets temp3, the
ambient temperature, but not temp1, the mobo temperature, or temp2, the
CPU temperature.
The mobo is en EP-8VTAI, which I would not get anymore.
As to why you'd have to get mbmon's source and dig it out, I guess.
Hugo
Reply to: