laptop sid upgrade. network works till startx then get agpgart kernel error and no network connectivity
Hi,
I enjoy playing with sid :)
I just updated to the latest sid on my Averatec Laptop 3250 running
amd processor
which worked fine before. Now when I boot all is fine, i can surf
web using lynx if i stay in console mode. Then when i startx (i have
tried it with kde, gnome, xfce4-session session managers) and
immediately I get kernel errors and then i no longer can use the
network. I am connected by ethernet cable to my local network via eth0
....
Here are two examples of the the tail of dmesg for two different
kernels:
(only stuff that happens after the startx
is invoked) :
here is dmesg using kernel 2.6.17-2-k7
dmesg|tail
***********
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
NFSD: starting 90-second grace period
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level,
low) -> IRQ 9
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up
support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c014da62>] __report_bad_irq+0x36/0x75
[<c014dc5a>] note_interrupt+0x1b9/0x1f7
[<c014d1a3>] handle_IRQ_event+0x23/0x51
[<c014e57f>] handle_level_irq+0x94/0xc5
[<c010639e>] do_IRQ+0x57/0x71
[<c010476b>] common_interrupt+0x23/0x28
[<c01274dd>] __do_softirq+0x56/0xd3
[<c012759f>] do_softirq+0x45/0x53
[<c0127803>] irq_exit+0x38/0x6b
[<c01063a3>] do_IRQ+0x5c/0x71
[<c010476b>] common_interrupt+0x23/0x28
=======================
handlers:
[<de87795d>]
(rhine_interrupt+0x0/0x654 [via_rhine])
Disabling IRQ #11
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status
0003, PHY status 786d,
resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d,
and here is what is related to that before! i run the startx
mlaks@AvneiNeizer:~$ dmesg|grep -i irq
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 9 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7) *0, disabled.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
a report
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 7 (level,
low) -> IRQ 7
PCI: VIA VLink IRQ fixup for 0000:00:10.0, from 0 to 7
uhci_hcd 0000:00:10.0: irq 7, io base 0x0000e400
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKD] -> GSI 7 (level,
low) -> IRQ 7
PCI: VIA VLink IRQ fixup for 0000:00:10.1, from 0 to 7
uhci_hcd 0000:00:10.1: irq 7, io base 0x0000e800
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKD] -> GSI 7 (level,
low) -> IRQ 7
PCI: VIA VLink IRQ fixup for 0000:00:10.2, from 0 to 7
uhci_hcd 0000:00:10.2: irq 7, io base 0x0000ec00
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level,
low) -> IRQ 7
PCI: VIA VLink IRQ fixup for 0000:00:10.3, from 0 to 7
ehci_hcd 0000:00:10.3: irq 7, io mem 0xdfffdf00
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
eth0: VIA Rhine II at 0x1d800, 00:40:45:25:61:68, IRQ 11.
ACPI: Unable to derive IRQ for device 0000:00:11.1
VP_IDE: not 100% native mode: will probe irqs later
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
de1 at 0x170-0x177,0x376 on irq 15
Yenta: ISA IRQ mask 0x0038, PCI irq 10
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level,
low) -> IRQ 10
I have tried booting with irqpoll option, no good, i have tried
noapic, no good.
here is the output using debian stock kernel 2.6.22-1-k7
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level,
low) -> IRQ 9
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up
support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c014da62>] __report_bad_irq+0x36/0x75
[<c014dc5a>] note_interrupt+0x1b9/0x1f7
[<c014d1a3>] handle_IRQ_event+0x23/0x51
[<c014e57f>] handle_level_irq+0x94/0xc5
[<c010639e>] do_IRQ+0x57/0x71
[<c010476b>] common_interrupt+0x23/0x28
[<c014d1a3>] handle_IRQ_event+0x23/0x51
[<c014d196>] handle_IRQ_event+0x16/0x51
[<c014e56b>] handle_level_irq+0x80/0xc5
[<c010639e>] do_IRQ+0x57/0x71
[<c010476b>] common_interrupt+0x23/0x28
[<c01274dd>] __do_softirq+0x56/0xd3
[<c012759f>] do_softirq+0x45/0x53
[<c0127803>] irq_exit+0x38/0x6b
[<c01063a3>] do_IRQ+0x5c/0x71
[<c010476b>] common_interrupt+0x23/0x28
=======================
handlers:
[<de87795d>]
(rhine_interrupt+0x0/0x654 [via_rhine])
Disabling IRQ #11
I have tried to disable agp with agp=off in /boot/grub/menu.lst but
this did not help..
any ideas what i can do?
mitchell
Reply to: