Re: how hot is my xeon?
On Fri, 2007-06-22 at 11:28 -0500, Hugo Vanwoerkom wrote:
> michael wrote:
> > On Fri, 2007-06-22 at 16:36 +0200, Pol Hallen wrote:
> >>> I've tried unsuccessfully to monitor my dual Xeon box but lm-sensors
> >>> doesn't seem to detect anything.
> >> Do u have the i2c kernel modules?
> >>
> >> Pol
> >>
> >>
> >
> > michael@ratty:~/Fortran$ sudo lsmod|grep -i i2c
> > i2c_dev 8548 0
> > i2c_i801 7468 0
> > i2c_core 19680 3 i2c_dev,nvidia,i2c_i801
> >
> >
> >
>
> Do you have lm-sensors installed?
> What does the 'sensors' command show?
>
Installed lm-sensors, and then:
michael@ratty:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
Script started on Mon 25 Jun 2007 14:55:30 BST
]0;michael@ratty: /home/michael
michael@ratty:~$ sudo sensors-detect
# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel 6300ESB
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no):
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: NVIDIA I2C Device
Do you want to scan it? (YES/no/selectively):
Adapter cannot be probed, skipping.
Next adapter: NVIDIA I2C Device
Do you want to scan it? (YES/no/selectively):
Adapter cannot be probed, skipping.
Next adapter: NVIDIA I2C Device
Do you want to scan it? (YES/no/selectively):
Adapter cannot be probed, skipping.
Next adapter: SMBus I801 adapter at 0400
Do you want to scan it? (YES/no/selectively):
Client found at address 0x30
Client found at address 0x42
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `EDID EEPROM'... No
Probing for `Maxim MAX6900'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x54
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x55
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x69
Client found at address 0x6e
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe
though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Winbond W83627HF' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `AMD K8 thermal sensors'... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... Yes
Found unknown chip with ID 0xf211
Trying family `National Semiconductor'... Yes
Found `Nat. Semi. PC87427 Super IO Fan Sensors' Success!
(address 0x7100, driver `to-be-written')
Found `Nat. Semi. PC87427 Super IO Health Sensors' Success!
(address 0x520, driver `to-be-written')
Trying family `SMSC'... Yes
Found unknown chip with ID 0xf211
Trying family `VIA/Winbond/Fintek'... Yes
Found unknown chip with ID 0xf211
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x54
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c-i801', I2C address 0x55
Chip `SPD EEPROM' (confidence: 8)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `to-be-written' (should be inserted):
Detects correctly:
* ISA bus address 0x7100 (Busdriver `i2c-isa')
Chip `Nat. Semi. PC87427 Super IO Fan Sensors' (confidence: 9)
* ISA bus address 0x0520 (Busdriver `i2c-isa')
Chip `Nat. Semi. PC87427 Super IO Health Sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To make the sensors modules behave correctly, add these lines to
/etc/modules:
#----cut here----
# I2C adapter drivers
i2c-i801
# Chip drivers
eeprom
# no driver for Nat. Semi. PC87427 Super IO Fan Sensors yet
#----cut here----
Do you want to add these lines to /etc/modules automatically? (yes/NO)
]0;michael@ratty: /home/michael
michael@ratty:~$ exit
Script done on Mon 25 Jun 2007 14:56:13 BST
Reply to: