Re: Intel pro100 NIC problem in Etch
Yuwen Dai(yuwend@gmail.com) is reported to have said:
> On 6/19/07, Wayne Topa <linuxone@intergate.com> wrote:
> >
> >Yuwen Dai(yuwend@gmail.com) is reported to have said:
> >> Dear all,
> >>
> >> I have a Intel pro100 network card in my PC. The system loads kernel
> >module
> >> `e100' automatically when booting. But ifconfig eth0 up failed. If I
> >> manually load `eepro100', ifconfig also failed. This is some output:
> >>
<--<snip>-->
> >If you try 'ifup eth1' or 2,3,4 and it comes up then
>
>
> Hi Wayne,
>
> Yes. `ifconfig eth1' brings up the network.
>
>
> Take a look at
> >/etc/udev/rules.d/z25_persistent-net.rules:
> >
> >I had this occur on a laptop. My net_rules file had a bunch of
> >eth lines and my eth1 cane up when I did 'ifup eth6". Removed all of
> >the eth rules except eth0 and all was well again.
>
>
> There's another rule with a different MAC address in this file. This
> reminds me that I once used another 3com NIC in the PC. So udev remembers
> this.
>
> Thank you very much!
Glad to help. Another satisfied Debian User. :-)
WT
--
It works! Now if only I could remember what I did...
_______________________________________________________
Reply to: