[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ata2 problems on boot



remigio escribió:
Hi,
I've installed Debian Etch and there is this problem:
system starts and during boot it pauses for at least one minute trying
to setting an "ata2" device.

Dmesg shows:

ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: limiting speed to UDMA/25
ata2: failed to recover some devices, retrying in 5 secs
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.00: revalidation failed (errno=-5)
ata2.00: disabled
ata2: failed to recover some devices, retrying in 5 secs
ATA: abnormal status 0x58 on port 0x177
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x40)
ata2.01: revalidation failed (errno=-5)
ata2: failed to recover some devices, retrying in 5 secs
ata2.01: configured for UDMA/33
  Vendor: HL-DT-ST  Model: DVD-ROM GDR8162B  Rev: 0015
  Type:   CD-ROM                             ANSI SCSI revision: 05

If on BIOS I set only the SATA controller active (without PATA) the
system starts endured but Debian don't tecognize cdrom and dvdrom.
The problem has been marked also like bug in the system of tracking of
Debian with the number Bug#402533, but it seems there are no solutions
yet.
Have you some suggestions to solve this problem?
Thank you very much.
I have sometimes the same problem with my SATA disk ... the only solution so far I have found is open the computer and re-plug the SATA cable to the hard disk... After I reboot the problem goes away... The seller told me that is because the poor SATA connection but I do not know if that's true or not. Maybe heat or something :-|

--
.---------------------------------------------------------------------.
| Miguel J. Jiménez                                                   |
| Programador Senior                                                  |
| Área de Internet/XSL/PHP                                            |
| migueljose.jimenez@isotrol.com                                      |
:---------------------------------------------------------------------:
| ISOTROL, S.A.                                                       |
| Edificio BLUENET, Avda. Isaac Newton nº3, 4ª planta.                |
| Parque Tecnológico Cartuja '93, 41092 Sevilla (ESP).                |
| Teléfono: +34 955 036 800 - Fax: +34 955 036 849                    |
| http://www.isotrol.com                                              |
:---------------------------------------------------------------------:
| "Aquellos que mueran mañana serán los que hayan sobrevivido hoy."   |
| Dusty Attenborough, La Leyenda de los Heroes de la Galaxia          |
'---------------------------------------------------------------------'

begin:vcard
fn;quoted-printable:Miguel J. Jim=C3=A9nez Jim=C3=A9nez
n;quoted-printable:Jim=C3=A9nez Jim=C3=A9nez;Miguel J.
org:ISOTROL, S.A.;XSL / PHP
adr;quoted-printable;quoted-printable;quoted-printable:Parque Tecnol=C3=B3gico Cartuja 93;;C/ Isaac Newton 3, 4=C2=AA;Sevilla;Sevilla;41092;Espa=C3=B1a
email;internet:mjjimenez@isotrol.com
title:Programador Senior
tel;work:+34 955 036 800 (ext. 1805)
tel;fax:+34 955 036 849
tel;cell:+34 607 44 87 64
x-mozilla-html:TRUE
url:http://www.isotrol.com
version:2.1
end:vcard


Reply to: