Re: sound blaster card
On Thu, 2007-03-29 at 13:23 +0100, michael wrote:
> On Thu, 2007-03-29 at 13:45 +0200, steef wrote:
> > michael wrote:
> > > On Thu, 2007-03-29 at 11:36 +0100, michael wrote:
> > >
> > >> On Thu, 2007-03-29 at 01:36 -0700, Andrew Sackville-West wrote:
> > >>
> > >>> On Thu, Mar 29, 2007 at 09:24:03AM +0100, michael wrote:
> > >>>
> > >>>> On Wed, 2007-03-28 at 14:39 -0700, Andrew Sackville-West wrote:
> > >>>>
> > >>>>> On Wed, Mar 28, 2007 at 09:30:56PM +0100, michael wrote:
> > >>>>>
> > >>>>>> On Wed, 2007-03-28 at 13:05 -0700, Andrew Sackville-West wrote:
> > >>>>>>
> > >>>>>>> On Wed, Mar 28, 2007 at 12:48:19PM +0100, michael wrote:
> > >>>>>>>
> > >>>>>>>> On Wed, 2007-03-28 at 05:37 -0600, Teilhard Knight wrote:
> > >>>>>>>>
> > >>>>>>>>> Folks
> > >>>>>>>>> I've a Creative Sound Blaster Live! 24bit soundcard which I've got to
> > >>>>>>>>> work in another Debian 2.6 box but am having problems with another box,
> > >>>>>>>>> so all help welcome. Full details are below, but essentially lspci sees
> > >>>>>>>>> the card but alsaconf gives firstly:
> > >>>>>>>>> "No supported PnP or PCI card found. ???
> > >>>>>>>>>
> > >>>>>>> please provide us with relevant output of lspci -vv
> > >>>>>>>
> > >>>>>>> also, provide the output of
> > >>>>>>>
> > >>>>>>> lsmod | grep snd
> > >>>>>>>
> > >>>>>>>
> > >>>>>> As requested:
> > >>>>>>
> > >>>>>> michael@ratty:~$ sudo lspci -vv;lsmod |grep snd
> > >>>>>> Password:
> > >>>>>> {snip}
> > >>>>>>
> > >>>>>> 0000:04:05.0 Multimedia audio controller: Creative Labs SB Audigy LS
> > >>>>>> Subsystem: Creative Labs: Unknown device 1006
> > >>>>>>
> > >>>>> ----------------------------------^^^^^^^^^^^^^^^^^
> > >>>>>
> > >>>>> it appears the kernel is not recognising your card. do you know which
> > >>>>> module it requires? you could manually insert the module (modprobe)
> > >>>>> and then try alsaconf again. If that worked, you'd have to then find
> > >>>>> out WHY the kernel wasn't identifying the card properly, or why
> > >>>>> themodule wasn'tbeing inserted (blacklisted perhaps? or maybe not
> > >>>>> selected in the kernel config).
> > >>>>>
> > >>>>> hth
> > >>>>>
> > >>>> with the other machines I used, alsaconf inserted the module. also note
> > >>>> that virtually all my devices are unknown (so nothing should work?!):
> > >>>>
> > >>> huh. look at that. mine too... well not so many as you, but still.
> > >>>
> > >>> regardless, do you know which module? and can you manually insert it to
> > >>> see what happens?
> > >>>
> > >>>
> > >> I'm pretty sure it wants the ca0106 but I can't find it
> > >> (NB this box is 'stable' dist, the other which worked was 'unstable')
> > >> However am confused as to why we don't need to discover why alsaconf
> > >> isn't finding card before we worry about modules?
> > >>
> > >
> > > mmm.. maybe the answer is staring me in the face: unstable has a later
> > > version of ALSA than stable...
> > >
> > > so how would I go about installing *just* ALSA from unstable?
> > >
> > >
> > >
> > hi,
> >
> > install the newest alsa-drivers into your kernel from the alsa website.
>
> downloaded alsa-driver-1.0.14rc3.tar but './configure' fails but I don't
> see why.
>
> config.log
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
>
> It was created by configure, which was
> generated by GNU Autoconf 2.59. Invocation command line was
>
> $ ./configure --with-cards=ca0106 --with-sequencer=yes
>
> ## --------- ##
> ## Platform. ##
> ## --------- ##
>
> hostname = ratty
> uname -m = i686
> uname -r = 2.6.8-3-686-smp
> uname -s = Linux
> uname -v = #1 SMP Sat Jul 15 08:52:57 UTC 2006
>
> /usr/bin/uname -p = unknown
> /bin/uname -X = unknown
>
> /bin/arch = i686
> /usr/bin/arch -k = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo = unknown
> /bin/machine = unknown
> /usr/bin/oslevel = unknown
> /bin/universe = unknown
>
> PATH: /usr/local/bin
> PATH: /usr/bin
> PATH: /bin
> PATH: /usr/bin/X11
> PATH: /usr/games
> PATH: /opt/intel/fc/9.0/bin
> PATH: /opt/intel_cc_80/bin
> PATH: /usr/local/mpich/bin
> PATH: /home/michael/bin
> PATH: /home/mbane/netCDF/netcdf-3.5.1/bin
> PATH: /usr/local/ncarg/bin
>
>
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
>
> configure:1375: checking for gcc
> configure:1391: found /usr/bin/gcc
> configure:1401: result: gcc
> configure:1645: checking for C compiler version
> configure:1648: gcc --version </dev/null >&5
> gcc (GCC) 3.3.5 (Debian 1:3.3.5-13)
> Copyright (C) 2003 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is
> NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
> PURPOSE.
>
> configure:1651: $? = 0
> configure:1653: gcc -v </dev/null >&5
> Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.5/specs
> Configured with: ../src/configure -v --enable-languages=c,c
> ++,java,f77,pascal,objc,ada,treelang --prefix=/usr
> --mandir=/usr/share/man --infodir=/usr/share/info
> --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared
> --enable-__cxa_atexit --with-system-zlib --enable-nls
> --without-included-gettext --enable-clocale=gnu --enable-debug
> --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc
> i486-linux
> Thread model: posix
> gcc version 3.3.5 (Debian 1:3.3.5-13)
> configure:1656: $? = 0
> configure:1658: gcc -V </dev/null >&5
> gcc: `-V' option must have argument
> configure:1661: $? = 1
> configure:1684: checking for C compiler default output file name
> configure:1687: gcc conftest.c >&5
> configure:1690: $? = 0
> configure:1736: result: a.out
> configure:1741: checking whether the C compiler works
> configure:1747: ./a.out
> configure:1750: $? = 0
> configure:1767: result: yes
> configure:1774: checking whether we are cross compiling
> configure:1776: result: no
> configure:1779: checking for suffix of executables
> configure:1781: gcc -o conftest conftest.c >&5
> configure:1784: $? = 0
> configure:1809: result:
> configure:1815: checking for suffix of object files
> configure:1836: gcc -c conftest.c >&5
> configure:1839: $? = 0
> configure:1861: result: o
> configure:1865: checking whether we are using the GNU C compiler
> configure:1889: gcc -c conftest.c >&5
> configure:1895: $? = 0
> configure:1899: test -z
> || test ! -s conftest.err
> configure:1902: $? = 0
> configure:1905: test -s conftest.o
> configure:1908: $? = 0
> configure:1921: result: yes
> configure:1927: checking whether gcc accepts -g
> configure:1948: gcc -c -g conftest.c >&5
> configure:1954: $? = 0
> configure:1958: test -z
> || test ! -s conftest.err
> configure:1961: $? = 0
> configure:1964: test -s conftest.o
> configure:1967: $? = 0
> configure:1978: result: yes
> configure:1995: checking for gcc option to accept ANSI C
> configure:2065: gcc -c -g -O2 conftest.c >&5
> configure:2071: $? = 0
> configure:2075: test -z
> || test ! -s conftest.err
> configure:2078: $? = 0
> configure:2081: test -s conftest.o
> configure:2084: $? = 0
> configure:2102: result: none needed
> configure:2120: gcc -c -g -O2 conftest.c >&5
> conftest.c:2: error: syntax error before "me"
> configure:2126: $? = 1
> configure: failed program was:
> | #ifndef __cplusplus
> | choke me
> | #endif
> configure:2300: checking for ranlib
> configure:2316: found /usr/bin/ranlib
> configure:2327: result: ranlib
> configure:2377: checking for a BSD-compatible install
> configure:2432: result: /usr/bin/install -c
> configure:2455: checking how to run the C preprocessor
> configure:2490: gcc -E conftest.c
> configure:2496: $? = 0
> configure:2528: gcc -E conftest.c
> conftest.c:9:28: ac_nonexistent.h: No such file or directory
> configure:2534: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | /* end confdefs.h. */
> | #include <ac_nonexistent.h>
> configure:2573: result: gcc -E
> configure:2597: gcc -E conftest.c
> configure:2603: $? = 0
> configure:2635: gcc -E conftest.c
> conftest.c:9:28: ac_nonexistent.h: No such file or directory
> configure:2641: $? = 1
> configure: failed program was:
> | /* confdefs.h. */
> |
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | /* end confdefs.h. */
> | #include <ac_nonexistent.h>
> configure:2685: checking for egrep
> configure:2695: result: grep -E
> configure:2700: checking for ANSI C header files
> configure:2725: gcc -c -g -O2 conftest.c >&5
> configure:2731: $? = 0
> configure:2735: test -z
> || test ! -s conftest.err
> configure:2738: $? = 0
> configure:2741: test -s conftest.o
> configure:2744: $? = 0
> configure:2830: gcc -o conftest -g -O2 conftest.c >&5
> configure:2833: $? = 0
> configure:2835: ./conftest
> configure:2838: $? = 0
> configure:2853: result: yes
> configure:2866: checking for an ANSI C-conforming const
> configure:2933: gcc -c -g -O2 conftest.c >&5
> configure:2939: $? = 0
> configure:2943: test -z
> || test ! -s conftest.err
> configure:2946: $? = 0
> configure:2949: test -s conftest.o
> configure:2952: $? = 0
> configure:2963: result: yes
> configure:2973: checking for inline
> configure:2994: gcc -c -g -O2 conftest.c >&5
> configure:3000: $? = 0
> configure:3004: test -z
> || test ! -s conftest.err
> configure:3007: $? = 0
> configure:3010: test -s conftest.o
> configure:3013: $? = 0
> configure:3025: result: inline
> configure:3044: checking whether time.h and sys/time.h may both be
> included
> configure:3069: gcc -c -g -O2 conftest.c >&5
> configure:3075: $? = 0
> configure:3079: test -z
> || test ! -s conftest.err
> configure:3082: $? = 0
> configure:3085: test -s conftest.o
> configure:3088: $? = 0
> configure:3099: result: yes
> configure:3111: checking whether gcc needs -traditional
> configure:3153: result: no
> configure:3161: checking for current directory
> configure:3165: result: /home/michael/src/alsa-driver-1.0.14rc3
> configure:3402: checking cross compile
> configure:3414: result:
> configure:3429: checking for directory with kernel source
> configure:3450: result: /lib/modules/2.6.8-3-686-smp/source
> configure:3453: checking for directory with kernel build
> configure:3465: result: /lib/modules/2.6.8-3-686-smp/build
> configure:3470: checking for kernel linux/version.h
> configure:3474: result: no
>
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
>
> ac_cv_c_compiler_gnu=yes
> ac_cv_c_const=yes
> ac_cv_c_inline=inline
> ac_cv_env_CC_set=
> ac_cv_env_CC_value=
> ac_cv_env_CFLAGS_set=
> ac_cv_env_CFLAGS_value=
> ac_cv_env_CPPFLAGS_set=
> ac_cv_env_CPPFLAGS_value=
> ac_cv_env_CPP_set=
> ac_cv_env_CPP_value=
> ac_cv_env_LDFLAGS_set=
> ac_cv_env_LDFLAGS_value=
> ac_cv_env_build_alias_set=
> ac_cv_env_build_alias_value=
> ac_cv_env_host_alias_set=
> ac_cv_env_host_alias_value=
> ac_cv_env_target_alias_set=
> ac_cv_env_target_alias_value=
> ac_cv_exeext=
> ac_cv_header_stdc=yes
> ac_cv_header_time=yes
> ac_cv_objext=o
> ac_cv_path_install='/usr/bin/install -c'
> ac_cv_prog_CPP='gcc -E'
> ac_cv_prog_ac_ct_CC=gcc
> ac_cv_prog_ac_ct_RANLIB=ranlib
> ac_cv_prog_cc_g=yes
> ac_cv_prog_cc_stdc=
> ac_cv_prog_egrep='grep -E'
> ac_cv_prog_gcc_traditional=no
>
> ## ----------------- ##
> ## Output variables. ##
> ## ----------------- ##
>
> AR='ar'
> ARCH=''
> AS='as'
> CC='gcc'
> CFLAGS='-g -O2'
> CONFIG_AC97_BUS=''
> CONFIG_ALPHA=''
> CONFIG_ARCH_AT91=''
> CONFIG_ARCH_PXA=''
> CONFIG_ARCH_S3C2410=''
> CONFIG_ARCH_SA1100=''
> CONFIG_ARM=''
> CONFIG_ARM_AMBA=''
> CONFIG_BROKEN=''
> CONFIG_EXPERIMENTAL=''
> CONFIG_FW_LOADER=''
> CONFIG_GSC=''
> CONFIG_HAVE_PCSP_HOOK=''
> CONFIG_HPET=''
> CONFIG_I2C=''
> CONFIG_I2C_POWERMAC=''
> CONFIG_I2C_SENSOR=''
> CONFIG_INPUT=''
> CONFIG_ISA=''
> CONFIG_ISAPNP=''
> CONFIG_ISAPNP_KERNEL=''
> CONFIG_ISA_DMA_API=''
> CONFIG_L3=''
> CONFIG_MACH_ETI_B1=''
> CONFIG_MACH_ETI_C1=''
> CONFIG_MACH_POODLE=''
> CONFIG_MACH_TOSA=''
> CONFIG_MIPS=''
> CONFIG_PARISC=''
> CONFIG_PARPORT=''
> CONFIG_PCI=''
> CONFIG_PCMCIA=''
> CONFIG_PM=''
> CONFIG_PNP=''
> CONFIG_PNP_KERNEL=''
> CONFIG_PPC=''
> CONFIG_PPC_PMAC=''
> CONFIG_PROC_FS=''
> CONFIG_PXA_SHARP_C7XX=''
> CONFIG_PXA_SHARP_CXX00=''
> CONFIG_RTC=''
> CONFIG_SBUS=''
> CONFIG_SGI=''
> CONFIG_SND=''
> CONFIG_SND_AC97_CODEC=''
> CONFIG_SND_AC97_POWER_SAVE=''
> CONFIG_SND_AD1816A=''
> CONFIG_SND_AD1848=''
> CONFIG_SND_AD1848_LIB=''
> CONFIG_SND_AD1889=''
> CONFIG_SND_ADLIB=''
> CONFIG_SND_ALI5451=''
> CONFIG_SND_ALS100=''
> CONFIG_SND_ALS300=''
> CONFIG_SND_ALS4000=''
> CONFIG_SND_AOA=''
> CONFIG_SND_AOA_FABRIC_LAYOUT=''
> CONFIG_SND_AOA_ONYX=''
> CONFIG_SND_AOA_SOUNDBUS=''
> CONFIG_SND_AOA_SOUNDBUS_I2S=''
> CONFIG_SND_AOA_TAS=''
> CONFIG_SND_AOA_TOONIE=''
> CONFIG_SND_ARMAACI=''
> CONFIG_SND_ASIHPI=''
> CONFIG_SND_AT91_SOC=''
> CONFIG_SND_AT91_SOC_ETI_B1_WM8731=''
> CONFIG_SND_AT91_SOC_ETI_SLAVE=''
> CONFIG_SND_AT91_SOC_I2S=''
> CONFIG_SND_ATIIXP=''
> CONFIG_SND_ATIIXP_MODEM=''
> CONFIG_SND_AU1X00=''
> CONFIG_SND_AU8810=''
> CONFIG_SND_AU8820=''
> CONFIG_SND_AU8830=''
> CONFIG_SND_AZT2320=''
> CONFIG_SND_AZT3328=''
> CONFIG_SND_BIT32_EMUL=''
> CONFIG_SND_BT87X=''
> CONFIG_SND_BT87X_OVERCLOCK=''
> CONFIG_SND_CA0106=''
> CONFIG_SND_CMI8330=''
> CONFIG_SND_CMIPCI=''
> CONFIG_SND_CS4231=''
> CONFIG_SND_CS4231_LIB=''
> CONFIG_SND_CS4232=''
> CONFIG_SND_CS4236=''
> CONFIG_SND_CS4281=''
> CONFIG_SND_CS46XX=''
> CONFIG_SND_CS46XX_NEW_DSP=''
> CONFIG_SND_CS5535AUDIO=''
> CONFIG_SND_DARLA20=''
> CONFIG_SND_DARLA24=''
> CONFIG_SND_DATE=''
> CONFIG_SND_DEBUG=''
> CONFIG_SND_DEBUG_DETECT=''
> CONFIG_SND_DEBUG_MEMORY=''
> CONFIG_SND_DT019X=''
> CONFIG_SND_DUMMY=''
> CONFIG_SND_DYNAMIC_MINORS=''
> CONFIG_SND_ECHO3G=''
> CONFIG_SND_EMU10K1=''
> CONFIG_SND_EMU10K1X=''
> CONFIG_SND_ENS1370=''
> CONFIG_SND_ENS1371=''
> CONFIG_SND_ES1688=''
> CONFIG_SND_ES18XX=''
> CONFIG_SND_ES1938=''
> CONFIG_SND_ES1968=''
> CONFIG_SND_ES968=''
> CONFIG_SND_FM801=''
> CONFIG_SND_FM801_TEA575X=''
> CONFIG_SND_FM801_TEA575X_BOOL=''
> CONFIG_SND_GINA20=''
> CONFIG_SND_GINA24=''
> CONFIG_SND_GUSCLASSIC=''
> CONFIG_SND_GUSEXTREME=''
> CONFIG_SND_GUSMAX=''
> CONFIG_SND_GUS_SYNTH=''
> CONFIG_SND_HARMONY=''
> CONFIG_SND_HDA_INTEL=''
> CONFIG_SND_HDSP=''
> CONFIG_SND_HDSPM=''
> CONFIG_SND_HPET=''
> CONFIG_SND_HWDEP=''
> CONFIG_SND_ICE1712=''
> CONFIG_SND_ICE1724=''
> CONFIG_SND_INDIGO=''
> CONFIG_SND_INDIGODJ=''
> CONFIG_SND_INDIGOIO=''
> CONFIG_SND_INTEL8X0=''
> CONFIG_SND_INTEL8X0M=''
> CONFIG_SND_INTERWAVE=''
> CONFIG_SND_INTERWAVE_STB=''
> CONFIG_SND_KERNELDIR='/lib/modules/2.6.8-3-686-smp/source'
> CONFIG_SND_KORG1212=''
> CONFIG_SND_LAYLA20=''
> CONFIG_SND_LAYLA24=''
> CONFIG_SND_LOOPBACK=''
> CONFIG_SND_MAESTRO3=''
> CONFIG_SND_MIA=''
> CONFIG_SND_MIRO=''
> CONFIG_SND_MIXART=''
> CONFIG_SND_MIXER_OSS=''
> CONFIG_SND_MONA=''
> CONFIG_SND_MPU401=''
> CONFIG_SND_MPU401_UART=''
> CONFIG_SND_MSND_PINNACLE=''
> CONFIG_SND_MTPAV=''
> CONFIG_SND_MTS64=''
> CONFIG_SND_MVERSION=''
> CONFIG_SND_NM256=''
> CONFIG_SND_OPL3SA2=''
> CONFIG_SND_OPL3_LIB=''
> CONFIG_SND_OPL4_LIB=''
> CONFIG_SND_OPTI92X_AD1848=''
> CONFIG_SND_OPTI92X_CS4231=''
> CONFIG_SND_OPTI93X=''
> CONFIG_SND_OSSEMUL=''
> CONFIG_SND_PC98_CS4232=''
> CONFIG_SND_PCM=''
> CONFIG_SND_PCM_OSS=''
> CONFIG_SND_PCM_OSS_PLUGINS=''
> CONFIG_SND_PCM_XRUN_DEBUG=''
> CONFIG_SND_PCSP=''
> CONFIG_SND_PCXHR=''
> CONFIG_SND_PDAUDIOCF=''
> CONFIG_SND_PDPLUS=''
> CONFIG_SND_PORTMAN2X4=''
> CONFIG_SND_POWERMAC=''
> CONFIG_SND_POWERMAC_AUTO_DRC=''
> CONFIG_SND_PXA2XX_AC97=''
> CONFIG_SND_PXA2XX_I2SOUND=''
> CONFIG_SND_PXA2XX_PCM=''
> CONFIG_SND_PXA2XX_SOC=''
> CONFIG_SND_PXA2XX_SOC_AC97=''
> CONFIG_SND_PXA2XX_SOC_CORGI=''
> CONFIG_SND_PXA2XX_SOC_I2S=''
> CONFIG_SND_PXA2XX_SOC_POODLE=''
> CONFIG_SND_PXA2XX_SOC_SPITZ=''
> CONFIG_SND_PXA2XX_SOC_TOSA=''
> CONFIG_SND_RAWMIDI=''
> CONFIG_SND_RIPTIDE=''
> CONFIG_SND_RME32=''
> CONFIG_SND_RME9652=''
> CONFIG_SND_RME96=''
> CONFIG_SND_RTCTIMER=''
> CONFIG_SND_S3C2410=''
> CONFIG_SND_S3C24XX_SOC=''
> CONFIG_SND_S3C24XX_SOC_I2S=''
> CONFIG_SND_SA11XX_UDA1341=''
> CONFIG_SND_SB16=''
> CONFIG_SND_SB16_CSP=''
> CONFIG_SND_SB8=''
> CONFIG_SND_SBAWE=''
> CONFIG_SND_SEQUENCER=''
> CONFIG_SND_SEQUENCER_OSS=''
> CONFIG_SND_SEQ_DUMMY=''
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=''
> CONFIG_SND_SERIALMIDI=''
> CONFIG_SND_SERIAL_U16550=''
> CONFIG_SND_SGALAXY=''
> CONFIG_SND_SOC=''
> CONFIG_SND_SOC_AC97_BUS=''
> CONFIG_SND_SOC_AC97_CODEC=''
> CONFIG_SND_SOC_WM8731=''
> CONFIG_SND_SOC_WM8750=''
> CONFIG_SND_SOC_WM9712=''
> CONFIG_SND_SONICVIBES=''
> CONFIG_SND_SSCAPE=''
> CONFIG_SND_SUN_AMD7930=''
> CONFIG_SND_SUN_CS4231=''
> CONFIG_SND_SUN_DBRI=''
> CONFIG_SND_SUPPORT_OLD_API=''
> CONFIG_SND_TIMER=''
> CONFIG_SND_TRIDENT=''
> CONFIG_SND_USB_AUDIO=''
> CONFIG_SND_USB_USX2Y=''
> CONFIG_SND_VERBOSE_PRINTK=''
> CONFIG_SND_VERBOSE_PROCFS=''
> CONFIG_SND_VERSION='1.0.14rc3'
> CONFIG_SND_VIA82XX=''
> CONFIG_SND_VIA82XX_MODEM=''
> CONFIG_SND_VIRMIDI=''
> CONFIG_SND_VX222=''
> CONFIG_SND_VXPOCKET=''
> CONFIG_SND_VX_LIB=''
> CONFIG_SND_WAVEFRONT=''
> CONFIG_SND_YMFPCI=''
> CONFIG_SOC_AU1000=''
> CONFIG_SOC_AU1100=''
> CONFIG_SOC_AU1500=''
> CONFIG_SOUND=''
> CONFIG_SOUND_PRIME=''
> CONFIG_SPARC32=''
> CONFIG_SPARC64=''
> CONFIG_SPARC=''
> CONFIG_USB=''
> CONFIG_VIDEO_DEV=''
> CONFIG_VIDEO_V4L1=''
> CONFIG_X86=''
> CONFIG_X86_32=''
> CONFIG_X86_64=''
> CONFIG_X86_PC9800=''
> CPP='gcc -E'
> CPPFLAGS=''
> CROSS_COMPILE=''
> DEFS=''
> ECHO_C=''
> ECHO_N='-n'
> ECHO_T=''
> EGREP='grep -E'
> EXEEXT=''
> EXTRA_INCLUDES=''
> GENKSYMS=''
> INSTALL_DATA='${INSTALL} -m 644'
> INSTALL_PROGRAM='${INSTALL}'
> INSTALL_SCRIPT='${INSTALL}'
> KERNEL_INC=''
> KLD=''
> LDFLAGS=''
> LIBOBJS=''
> LIBS=''
> LTLIBOBJS=''
> MAKE_ADDS=''
> NEW_KBUILD=''
> OBJEXT='o'
> PACKAGE_BUGREPORT=''
> PACKAGE_NAME=''
> PACKAGE_STRING=''
> PACKAGE_TARNAME=''
> PACKAGE_VERSION=''
> PATH_SEPARATOR=':'
> RANLIB='ranlib'
> SHELL='/bin/sh'
> SRCDIR='/home/michael/src/alsa-driver-1.0.14rc3'
> ac_ct_CC='gcc'
> ac_ct_RANLIB='ranlib'
> bindir='${exec_prefix}/bin'
> build_alias=''
> c_opts=''
> datadir='${prefix}/share'
> exec_prefix='NONE'
> host_alias=''
> includedir='${prefix}/include'
> infodir='${prefix}/info'
> kaversion=''
> kextraversion=''
> kpatchlevel=''
> ksublevel=''
> kversion=''
> libdir='${exec_prefix}/lib'
> libexecdir='${exec_prefix}/libexec'
> localstatedir='${prefix}/var'
> m_opts=''
> mandir='${prefix}/man'
> moddir=''
> moddir_tree=''
> modsubdir=''
> msmp=''
> oldincludedir='/usr/include'
> prefix='NONE'
> processor=''
> program_transform_name='s,x,x,'
> sbindir='${exec_prefix}/sbin'
> sharedstatedir='${prefix}/com'
> sysconfdir='${prefix}/etc'
> target_alias=''
>
> ## ----------- ##
> ## confdefs.h. ##
> ## ----------- ##
>
> #define PACKAGE_BUGREPORT ""
> #define PACKAGE_NAME ""
> #define PACKAGE_STRING ""
> #define PACKAGE_TARNAME ""
> #define PACKAGE_VERSION ""
> #define STDC_HEADERS 1
> #define TIME_WITH_SYS_TIME 1
>
> configure: exit 1
TO answer myself,
(i) need to install relevant kernel-headers
but now 'make' gives error:
make -C /lib/modules/2.6.8-3-686-smp/source
SUBDIRS=/home/michael/src/alsa-driver-1.0.14rc3
O=/lib/modules/2.6.8-3-686-smp/build CPP="gcc -E" CC="gcc" modules
make: *** /lib/modules/2.6.8-3-686-smp/source: No such file or
directory. Stop.
make: *** [compile] Error 2
michael@ratty:~/src/alsa-driver-1.0.14rc3$
file /lib/modules/2.6.8-3-686-smp/source
/lib/modules/2.6.8-3-686-smp/source: broken symbolic link to
`/tmp/buildd/kernel-image-2.6.8-i386-2.6.8/install-686-smp'
michael@ratty:~/src/alsa-driver-1.0.14rc3$ dpkg -l kernel-headers
Desired=Unknown/Install/Remove/Purge/Hold
|
Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
uppercase=bad)
||/ Name Version Description
+++-===================-===================-======================================================
un kernel-headers <none> (no description available)
michael@ratty:~/src/alsa-driver-1.0.14rc3$ dpkg -l |grep kernel-headers
ii kernel-headers 2.4.27-10sarge Header files related to Linux kernel
version
ii kernel-headers 2.4.27-10sarge Linux 2.4.27 kernel headers for
PPro/Celeron
ii kernel-headers 2.6.8-16sarge4 Header files related to Linux kernel
version
ii kernel-headers 2.6.8-16sarge6 Linux kernel headers 2.6.8 on
PPro/Celeron/P
Reply to: