On Fri, Feb 02, 2007 at 05:18:46PM -0500, George Adams wrote: > Hello. I have the following setup in /etc/network/interfaces to bind two > IP addresses (let's say 11.22.33.44 and 11.22.33.45) onto my one NIC: > --------------------------------------------------- > auto lo > iface lo inet loopback > > auto eth0 > iface eth0 inet static > address 11.22.33.44 > netmask 255.255.255.0 > network 11.22.33.0 > broadcast 11.22.33.255 > gateway 11.22.33.1 > > auto eth0:0 > iface eth0 inet static > address 11.22.33.43 > netmask 255.255.255.0 > network 11.22.33.0 > broadcast 11.22.33.255 > gateway 11.22.33.1 > --------------------------------------------------- I may not be remembering correctly, but, I thought eth0:0 and eth0 refer to the same thing. so you have set eth0 to 11.22.33.44 and then using eth0:0 reset it to 11.22.33.43. I believe you need to use eth0 and eth0:1 to get seperate addresses on the same interface. A
Attachment:
signature.asc
Description: Digital signature