On Fri, May 12, 2006 at 03:06:10PM +0300, Fourat Zouari wrote: > >> >On Mon, May 01, 2006 at 08:59:01PM +0300, Zouari Fourat wrote: > >> >> :( > >> >> ubuntu didnt start X, didnt detect anything in my laptop > >> >> really i dont know what should i do > > > >Umm... you say it didn't detect anything? was it running with a > >terminal? (obviously, since it let you run lspci) did it provide mount > >points for your harddrive? I'm sorry, I've lost track of what you are trying to do here in this thread. OBviously, you're trying to install and having problems. Don't sweat the X failing to start issue, that can likely be solved. But first, really, you've got to get installed, right? > > > >have you tried a knoppix cd? If knoppix can find your disk, then you > >can figure out which modules you need. > >use lsmod from a terminal in knoppix. > > > >one more thing, I don't think you've told us what this laptop is: > >make, model, whatever information about hardware you might have... > > > here's the output of lsmod on ubuntu : [...] > > and other : > --------------------------------------------------------- > root@tux:~# dmesg|grep sata > [4294673.789000] sata_sil version 0.9 > [4294674.146000] scsi0 : sata_sil > [4294674.347000] scsi1 : sata_sil > root@tux:~# dmesg|grep ide > [4294672.068000] Boot video device is 0000:01:05.0 > [4294674.359000] ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > [4294674.359000] ACPI: bus type ide registered > [4294674.365000] ide0: BM-DMA at 0x8460-0x8467, BIOS settings: hda:pio, > hdb:pio > [4294674.365000] ide1: BM-DMA at 0x8468-0x846f, BIOS settings: hdc:DMA, > hdd:pio > [4294674.365000] Probing IDE interface ide0... > [4294674.884000] Probing IDE interface ide1... > [4294675.861000] ide1 at 0x170-0x177,0x376 on irq 15 > [4294675.861000] Probing IDE interface ide0... > [4294676.380000] Probing IDE interface ide2... > [4294676.892000] Probing IDE interface ide3... > [4294677.404000] Probing IDE interface ide4... > [4294677.916000] Probing IDE interface ide5... > --------------------------------------------------------- > > >> >> >> >> > > >> >> >> >> >On Fri, Apr 28, 2006 at 01:52:10PM +0300, Zouari Fourat wrote: > >> >> >> >> >> i've tried with both netinstall and business card install > >cd, > >> >it > >> >> >does > >> >> >> >> >not > >> >> >> >> >> recognize my hard disk, so i cant partition. > >> >> >> >> > > >> >> >> >> > I'm guessing you can't see the sata drive that you want to install to? Many others have solutions for this problem, check the archives. You might need a newer kernel to see the sata drives properly. SOrry I can't be of more help, maybe others can chime in. A
Attachment:
signature.asc
Description: Digital signature