Mount digital camera
Hi everyone
I am running a debian sarge using the 2.6.8-2-386 kernel.
I have got a Sony DSC-W30. Its Device ID is 054cx0010.
Here some information that may be useful:
When I connect my camera to the computer using USB the
system says:
Nov 13 12:30:39 localhost kernel: usb 1-2: new full speed
USB device using address 2
Mounting does not work:
mount -t vfat /dev/sda1 /mnt/somewhere
// mount: /dev/sda1 is not a valid block device
mount -t msdos /dev/sda1 /mnt/somewhere
// mount: /dev/sda1 is not a valid block device
mount -t usbfs /dev/sda /mnt/somewhere
// does not work either
# ls /proc/bus/usb
001 devices
So there is a file called driver which should show up here but
does not either.
// Some more hardware Information.
# less /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-2-386 uhci_hcd
S: Product=Intel Corp. 82801BA/BAM USB (Hub #2)
S: SerialNumber=0000:00:1f.4
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2
P: Vendor=054c ProdID=0010 Rev= 6.00
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
C: #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
// Some information about my loaded modules:
# lsmod | grep usb
usb_storage 59328 0
usbcore 104164 4 uhci_hcd,usb_storage
scsi_mod 115148 2 sd_mod,usb_storage
ide_core 125028 5 usb_storage,ide_cd,ide_generic,piix,ide_disk
I read all the entries at http://www.linux-usb.org/ on my vendor and
device ID. Some of them said that they could mount similar cameras
very easly. Others mentioned that they had to recompile their whole kernel.
What do you think? Thanks in advance for your valuable inputs.
Cheers
Sam
Reply to: