Re: how to start the sound system
On Tue, Oct 17, 2006 at 05:17:36PM +0200, Kay Smarczewski wrote:
> On Mon, Oct 16, 2006 at 08:35:24PM +0200, Florian Kulzer wrote:
> > On Mon, Oct 16, 2006 at 18:28:41 +0200, Jabka Atu wrote:
> > > Howdy,...
> > > i own acer 5102wlmi and im unable to start the sound system :
> > >
> > > debian:/home/mha13# lsmod|grep snd
> > > snd_seq_oss 35840 0
> > > snd_seq_midi 9792 0
> > > snd_rawmidi 27556 1 snd_seq_midi
> > > snd_seq_midi_event 9728 2 snd_seq_oss,snd_seq_midi
> > > snd_seq_device 9612 3 snd_seq_oss,snd_seq_midi,snd_rawmidi
> > > snd_seq 58816 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> > > snd_ioctl32 17920 0
> > > snd_pcm_oss 57704 0
> > > snd_mixer_oss 20032 1 snd_pcm_oss
> > > snd_pcm 105864 2 snd_ioctl32,snd_pcm_oss
> > > snd_page_alloc 13904 1 snd_pcm
> > > snd_timer 26440 2 snd_seq,snd_pcm
> > > snd 58952 11
> > > snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq_midi_event,snd_seq_device,snd_seq,snd_ioctl32,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> > >
> > > soundcore 12000 1 snd
> > > im using
> > > kernel Linux debian 2.6.8-12-amd64-k8-smp #1 SMP Mon Jul 17 00:17:20 UTC
> > > 2006 x86_64 GNU/Linux
> > >
> > > when i start alsaconf i get no supported pci card.
> > > i have installed alsa-utils alsa-base and alsa-oss
> >
> > Your kernel version suggests that you run Sarge. The version of alsa in
> > Sarge might be too old to support your hardware. Please post the output
> > of "lspci | grep -i audio" to let us know which soundcard is used. (That
> > has higher chances of success than hoping that someone will know it
> > directly from the model number of the laptop.)
> >
> > --
> > Regards,
> > Florian
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >
> >
>
> I have the same laptop and the same problem.
> The only difference is that i have the kernel 2.6.19rc2.
>
> lspci | grep -i audio :
> 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
>
> I tried to compile alsa for myself because i think i have to use a newer
> alsa. so i downloaded the 1.0.13rc3 and did the following:
>
> tar -xfj alsa-driver-1.0.13rc3
> cd alsa-driver-1.0.13rc3/
> ./configure --with-cards=hda-intel --with-sequencer=yes;make;
>
> and got these errors:
> make[1]: Entering directory `/usr/src/linux-2.6.19rc2'
> CC [M] /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o
> In Datei, eingefügt von
> /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
> /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:1:26: Fehler:
> linux/config.h: Datei oder Verzeichnis nicht gefunden
> In file included from
> /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.inc:13,
> from
> /usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.c:1:
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:742:
> Fehler: Redefinition von »jiffies_to_msecs«
> include/linux/jiffies.h:268: Fehler: Vorherige
> Definition von »jiffies_to_msecs« war hier
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:761:
> Fehler: Redefinition von »msecs_to_jiffies«
> include/linux/jiffies.h:290: Fehler: Vorherige
> Definition von »msecs_to_jiffies« war hier
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
> In Funktion »snd_pci_orig_save_state«:
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1099:
> Fehler: zu viele Argumente für Funktion
> »pci_save_state«
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:
> In Funktion »snd_pci_orig_restore_state«:
> /usr/src/alsa/alsa-driver-1.0.13rc3/include/adriver.h:1103:
> Fehler: zu viele Argumente für Funktion
> »pci_restore_state«
> make[4]: ***
> [/usr/src/alsa/alsa-driver-1.0.13rc3/acore/memalloc.o]
> Fehler 1
> make[3]: ***
> [/usr/src/alsa/alsa-driver-1.0.13rc3/acore] Fehler 2
> make[2]: ***
> [_module_/usr/src/alsa/alsa-driver-1.0.13rc3] Fehler
> 2
> make[1]: *** [modules] Fehler 2
> make[1]: Leaving directory `/usr/src/linux-2.6.19rc2'
> make: *** [compile] Fehler 2
>
> and so i could not execute make install.
>
>
> i tried also this:
> Creating /etc/modutils/mythings with following content:
> alias snd-card-0 snd-hda-intel
> options snd-hda-intel model=acer position_fix=1 enable=yes
>
> and execute:
> # update-modules.modutils
>
> and got:
> Architecture-specific modutils configuration for x86_64 not found, using
> defaults
Now i've recompiled my kernel with some more modules and got a "better"
error message: i started mocp and it stops with
mocp: interface_elements.c:3267: iface_set_mixer_value: Assertion `value
>= 0 && value <= 100` failed.
Any ideas?
Reply to: