Re: Memory card reader on Etch
First of all thanks to all who replied.
Now I try to reply to all messages.
Jeff D wrote:
> Mirto Silvio Busico wrote:
>> Sorry. Not posted to the list.
>>
>> Ron Johnson wrote:
>>
>>> Mirto Silvio Busico wrote:
>>>
>>>>> Hi all,
>>>>>
>>>>> where can I find information on using an integrated memory card
>>>>> reader?
>>>>>
>>>>> I have a Toshiba laptop with an integrated memory card reader.
>>>>> I'm using Etch
>>>>>
>>> It should "just work". Are you having any specific problems?
>>>
>>>
>>>
>> Probably I'm not able to see the memory card mounted.
>> When I insert the memory card, I didn't see it not in mount, nor appears
>> an icon (as it does for usb pen drive)..
>> If I look at PCI elements I see:
>> ...
>> msb01:~# lspci
>> 00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
>> 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
>> 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1
>> (rev 01)
>> 00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2
>> (rev 01)
>> 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev
>> 01)
>> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 1a)
>> 00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master
>> PCI IDE Controller
>> 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
>> 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342
>> 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97
>> Audio Controller (rev 01)
>> 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
>> 01:05.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
>> Radeon 9600 M10]
>> 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>> Controller (rev 80)
>> 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212
>> 802.11abg NIC (rev 01)
>> 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>> RTL-8139/8139C/8139C+ (rev 10)
>> 02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller
>> 02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card
>> Reader Controller
>> 02:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card
>> Reader Controller
>> 02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology
>> Inc:
>> msb01:~#
>> ...
>>
>> The last four lines seems to indicate that the card reader is working.
>>
>> Mybe I'm doing something wrong.
>>
>> Mirto
>>
>
> whats the dmesg output after you put the memory card in? You might be
> able to find out what device its getting assigned to.
>
>
Sorry to say that nothing appear in messages and dmesg. BTW I attached
the files.
What can I check?
Mirto
--
__________________________________________________________
Mirto Silvio Busico ICT Consultant
Tel. +39 333 4562651
Linux version 2.6.16-2-686-smp (Debian 2.6.16-17) (waldi@debian.org) (gcc version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 SMP Sat Jul 15 22:33:00 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
1023MB LOWMEM available.
found SMP MP-table at 000f68f0
On node 0 totalpages: 262000
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 257904 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI present.
ATI board detected. Disabling timer routing over 8254.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6950
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3ff75f3a
ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x3ff7af24
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3ff7af98
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x3ff75f6a
ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3467.234 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 1030432k/1048000k available (1505k kernel code, 16920k reserved, 545k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6942.96 BogoMIPS (lpj=13885925)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6934.05 BogoMIPS (lpj=13868103)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000459d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Total of 2 processors activated (13877.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 4320k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
pnp: 00:07: ioport range 0x220-0x22f has been reserved
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: e8100000-e81fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000a800-0000a8ff
IO window: 0000ac00-0000acff
PREFETCH window: 60000000-61ffffff
MEM window: 62000000-63ffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: e8200000-e82fffff
PREFETCH window: 60000000-61ffffff
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
audit: initializing netlink socket (disabled)
audit(1155801533.428:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
ACPI: PCI interrupt for device 0000:00:14.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI wakeup devices:
ELAN OHC1 OHC2 EHCI MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 176k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ieee1394: Initialized config rom entry `ip1394'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
8139too Fast Ethernet driver 0.9.27
hda: TOSHIBA MK1031GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: DV-W28E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 193, io mem 0xe8001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 193, io mem 0xe8002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 193, io mem 0xe8003000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e8210000-e82107ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 193
eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:3d:04:48, IRQ 193
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2193kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
usb 1-2: new low speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4c5b401987]
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
input: PC Speaker as /class/input/input2
Real Time Clock Driver v1.12ac
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
mice: PS/2 mouse device common for all mice
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Ati IGP9100/M chipset
agpgart: AGP aperture is 64M @ 0xec000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ts: Compaq touchscreen protocol output
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (svn r1644)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
ath_rate_sample: 1.2 (svn r1644)
ath_pci: 0.9.4.5 (svn r1644)
input: PS/2 Mouse as /class/input/input3
input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
Yenta: ISA IRQ mask 0x0a78, PCI irq 177
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 201
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.9 phy 4.3 radio 4.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xe8200000, irq=201
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
atiixp-modem: codec reset timeout
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
cs: IO port probe 0xa00-0xaff: clean.
Adding 3132632k swap on /dev/hda5. Priority:-1 extents:1 across:3132632k
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
Aug 16 09:04:34 msb01 syslogd 1.4.1#18: restart.
Aug 16 09:29:01 msb01 -- MARK --
Aug 16 09:49:01 msb01 -- MARK --
Aug 16 10:09:01 msb01 -- MARK --
Aug 16 10:29:01 msb01 -- MARK --
Aug 16 10:49:02 msb01 -- MARK --
Aug 16 11:09:02 msb01 -- MARK --
Aug 16 11:29:02 msb01 -- MARK --
Aug 16 11:49:02 msb01 -- MARK --
Aug 16 12:09:02 msb01 -- MARK --
Aug 16 12:29:02 msb01 -- MARK --
Aug 16 12:49:02 msb01 -- MARK --
Aug 16 13:09:02 msb01 -- MARK --
Aug 16 13:29:02 msb01 -- MARK --
Aug 16 13:49:02 msb01 -- MARK --
Aug 16 14:09:02 msb01 -- MARK --
Aug 16 14:29:02 msb01 -- MARK --
Aug 16 14:49:03 msb01 -- MARK --
Aug 16 15:09:03 msb01 -- MARK --
Aug 16 15:29:03 msb01 -- MARK --
Aug 16 15:49:03 msb01 -- MARK --
Aug 16 16:09:03 msb01 -- MARK --
Aug 16 16:29:03 msb01 -- MARK --
Aug 16 16:49:03 msb01 -- MARK --
Aug 16 17:09:03 msb01 -- MARK --
Aug 16 17:29:03 msb01 -- MARK --
Aug 16 17:31:26 msb01 gconfd (mirto-7195): Ricevuto segnale 15, arresto regolare
Aug 16 17:31:28 msb01 gconfd (mirto-7195): Uscita
Aug 16 17:31:42 msb01 shutdown[5832]: shutting down for system halt
Aug 16 17:31:47 msb01 kernel: apm: BIOS not found.
Aug 16 17:32:06 msb01 kernel: Kernel logging (proc) stopped.
Aug 16 17:32:06 msb01 kernel: Kernel log daemon terminating.
Aug 16 17:32:07 msb01 exiting on signal 15
Aug 17 07:55:24 msb01 syslogd 1.4.1#18: restart.
Aug 17 07:55:24 msb01 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Aug 17 07:55:24 msb01 kernel: Linux version 2.6.16-2-686-smp (Debian 2.6.16-17) (waldi@debian.org) (gcc version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 SMP Sat Jul 15 22:33:00 UTC 2006
Aug 17 07:55:24 msb01 kernel: BIOS-provided physical RAM map:
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 17 07:55:24 msb01 kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Aug 17 07:55:24 msb01 kernel: 0MB HIGHMEM available.
Aug 17 07:55:24 msb01 kernel: 1023MB LOWMEM available.
Aug 17 07:55:24 msb01 kernel: found SMP MP-table at 000f68f0
Aug 17 07:55:24 msb01 kernel: DMI present.
Aug 17 07:55:24 msb01 kernel: ATI board detected. Disabling timer routing over 8254.
Aug 17 07:55:24 msb01 kernel: ACPI: PM-Timer IO Port: 0x8008
Aug 17 07:55:24 msb01 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 17 07:55:24 msb01 kernel: Processor #0 15:4 APIC version 20
Aug 17 07:55:24 msb01 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 17 07:55:24 msb01 kernel: Processor #1 15:4 APIC version 20
Aug 17 07:55:24 msb01 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 17 07:55:24 msb01 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 17 07:55:24 msb01 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 17 07:55:24 msb01 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 17 07:55:24 msb01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Aug 17 07:55:24 msb01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Aug 17 07:55:24 msb01 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 17 07:55:24 msb01 kernel: More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Aug 17 07:55:24 msb01 kernel: Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Aug 17 07:55:24 msb01 kernel: Using ACPI (MADT) for SMP configuration information
Aug 17 07:55:24 msb01 kernel: Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Aug 17 07:55:24 msb01 kernel: Built 1 zonelists
Aug 17 07:55:24 msb01 kernel: Kernel command line: root=/dev/hda6 ro
Aug 17 07:55:24 msb01 kernel: Enabling fast FPU save and restore... done.
Aug 17 07:55:24 msb01 kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 17 07:55:24 msb01 kernel: Initializing CPU#0
Aug 17 07:55:24 msb01 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Aug 17 07:55:24 msb01 kernel: Detected 3467.419 MHz processor.
Aug 17 07:55:24 msb01 kernel: Using pmtmr for high-res timesource
Aug 17 07:55:24 msb01 kernel: Console: colour VGA+ 80x25
Aug 17 07:55:24 msb01 kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Aug 17 07:55:24 msb01 kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 17 07:55:24 msb01 kernel: Memory: 1030432k/1048000k available (1505k kernel code, 16920k reserved, 545k data, 176k init, 0k highmem)
Aug 17 07:55:24 msb01 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 17 07:55:24 msb01 kernel: Calibrating delay using timer specific routine.. 6942.94 BogoMIPS (lpj=13885884)
Aug 17 07:55:24 msb01 kernel: Security Framework v1.0.0 initialized
Aug 17 07:55:24 msb01 kernel: SELinux: Disabled at boot.
Aug 17 07:55:24 msb01 kernel: Capability LSM initialized
Aug 17 07:55:24 msb01 kernel: Mount-cache hash table entries: 512
Aug 17 07:55:24 msb01 kernel: monitor/mwait feature present.
Aug 17 07:55:24 msb01 kernel: using mwait in idle threads.
Aug 17 07:55:24 msb01 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Aug 17 07:55:24 msb01 kernel: CPU: L2 cache: 1024K
Aug 17 07:55:24 msb01 kernel: CPU: Physical Processor ID: 0
Aug 17 07:55:24 msb01 kernel: Intel machine check architecture supported.
Aug 17 07:55:24 msb01 kernel: Intel machine check reporting enabled on CPU#0.
Aug 17 07:55:24 msb01 kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Aug 17 07:55:24 msb01 kernel: CPU0: Thermal monitoring enabled
Aug 17 07:55:24 msb01 kernel: Checking 'hlt' instruction... OK.
Aug 17 07:55:24 msb01 kernel: CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Aug 17 07:55:24 msb01 kernel: Booting processor 1/1 eip 3000
Aug 17 07:55:24 msb01 kernel: Initializing CPU#1
Aug 17 07:55:24 msb01 kernel: Calibrating delay using timer specific routine.. 6933.98 BogoMIPS (lpj=13867978)
Aug 17 07:55:24 msb01 kernel: monitor/mwait feature present.
Aug 17 07:55:24 msb01 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Aug 17 07:55:24 msb01 kernel: CPU: L2 cache: 1024K
Aug 17 07:55:24 msb01 kernel: CPU: Physical Processor ID: 0
Aug 17 07:55:24 msb01 kernel: Intel machine check architecture supported.
Aug 17 07:55:24 msb01 kernel: Intel machine check reporting enabled on CPU#1.
Aug 17 07:55:24 msb01 kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
Aug 17 07:55:24 msb01 kernel: CPU1: Thermal monitoring enabled
Aug 17 07:55:24 msb01 kernel: CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Aug 17 07:55:24 msb01 kernel: Total of 2 processors activated (13876.93 BogoMIPS).
Aug 17 07:55:24 msb01 kernel: ENABLING IO-APIC IRQs
Aug 17 07:55:24 msb01 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 17 07:55:24 msb01 kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed.
Aug 17 07:55:24 msb01 kernel: ...trying to set up timer as Virtual Wire IRQ... works.
Aug 17 07:55:24 msb01 kernel: checking TSC synchronization across 2 CPUs: passed.
Aug 17 07:55:24 msb01 kernel: Brought up 2 CPUs
Aug 17 07:55:24 msb01 kernel: migration_cost=4000
Aug 17 07:55:24 msb01 kernel: checking if image is initramfs... it is
Aug 17 07:55:24 msb01 kernel: Freeing initrd memory: 4320k freed
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 16
Aug 17 07:55:24 msb01 kernel: ACPI: bus type pci registered
Aug 17 07:55:24 msb01 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
Aug 17 07:55:24 msb01 kernel: PCI: Using configuration type 1
Aug 17 07:55:24 msb01 kernel: ACPI: Subsystem revision 20060127
Aug 17 07:55:24 msb01 kernel: ACPI: Interpreter enabled
Aug 17 07:55:24 msb01 kernel: ACPI: Using IOAPIC for interrupt routing
Aug 17 07:55:24 msb01 kernel: ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
Aug 17 07:55:24 msb01 last message repeated 3 times
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 17 07:55:24 msb01 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Aug 17 07:55:24 msb01 kernel: PCI: Transparent bridge - 0000:00:14.4
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
Aug 17 07:55:24 msb01 kernel: ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
Aug 17 07:55:24 msb01 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 17 07:55:24 msb01 kernel: pnp: PnP ACPI init
Aug 17 07:55:24 msb01 kernel: pnp: PnP ACPI: found 9 devices
Aug 17 07:55:24 msb01 kernel: PnPBIOS: Disabled by ACPI PNP
Aug 17 07:55:24 msb01 kernel: PCI: Using ACPI for IRQ routing
Aug 17 07:55:24 msb01 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 17 07:55:24 msb01 kernel: pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
Aug 17 07:55:24 msb01 kernel: pnp: 00:07: ioport range 0x220-0x22f has been reserved
Aug 17 07:55:24 msb01 kernel: pnp: 00:07: ioport range 0x40b-0x40b has been reserved
Aug 17 07:55:24 msb01 kernel: pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
Aug 17 07:55:24 msb01 kernel: PCI: Bridge: 0000:00:01.0
Aug 17 07:55:24 msb01 kernel: IO window: 9000-9fff
Aug 17 07:55:24 msb01 kernel: MEM window: e8100000-e81fffff
Aug 17 07:55:24 msb01 kernel: PREFETCH window: f0000000-f7ffffff
Aug 17 07:55:24 msb01 kernel: PCI: Bus 3, cardbus bridge: 0000:02:04.0
Aug 17 07:55:24 msb01 kernel: IO window: 0000a800-0000a8ff
Aug 17 07:55:24 msb01 kernel: IO window: 0000ac00-0000acff
Aug 17 07:55:24 msb01 kernel: PREFETCH window: 60000000-61ffffff
Aug 17 07:55:24 msb01 kernel: MEM window: 62000000-63ffffff
Aug 17 07:55:24 msb01 kernel: PCI: Bridge: 0000:00:14.4
Aug 17 07:55:24 msb01 kernel: IO window: a000-afff
Aug 17 07:55:24 msb01 kernel: MEM window: e8200000-e82fffff
Aug 17 07:55:24 msb01 kernel: PREFETCH window: 60000000-61ffffff
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 07:55:24 msb01 kernel: audit: initializing netlink socket (disabled)
Aug 17 07:55:24 msb01 kernel: audit(1155801225.484:1): initialized
Aug 17 07:55:24 msb01 kernel: VFS: Disk quotas dquot_6.5.1
Aug 17 07:55:24 msb01 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 17 07:55:24 msb01 kernel: Initializing Cryptographic API
Aug 17 07:55:24 msb01 kernel: io scheduler noop registered
Aug 17 07:55:24 msb01 kernel: io scheduler anticipatory registered (default)
Aug 17 07:55:24 msb01 kernel: io scheduler deadline registered
Aug 17 07:55:24 msb01 kernel: io scheduler cfq registered
Aug 17 07:55:24 msb01 kernel: isapnp: Scanning for PnP cards...
Aug 17 07:55:24 msb01 kernel: isapnp: No Plug & Play device found
Aug 17 07:55:24 msb01 kernel: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Aug 17 07:55:24 msb01 kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Aug 17 07:55:24 msb01 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 17 07:55:24 msb01 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 17 07:55:24 msb01 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 17 07:55:24 msb01 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 17 07:55:24 msb01 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 17 07:55:24 msb01 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 07:55:24 msb01 kernel: ACPI: PCI interrupt for device 0000:00:14.6 disabled
Aug 17 07:55:24 msb01 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 2
Aug 17 07:55:24 msb01 kernel: IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 17 07:55:24 msb01 kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 17 07:55:24 msb01 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Aug 17 07:55:24 msb01 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Aug 17 07:55:24 msb01 kernel: TCP reno registered
Aug 17 07:55:24 msb01 kernel: TCP bic registered
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 1
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 17
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 8
Aug 17 07:55:24 msb01 kernel: NET: Registered protocol family 20
Aug 17 07:55:24 msb01 kernel: Using IPI No-Shortcut mode
Aug 17 07:55:24 msb01 kernel: ACPI wakeup devices:
Aug 17 07:55:24 msb01 kernel: ELAN OHC1 OHC2 EHCI MODM
Aug 17 07:55:24 msb01 kernel: ACPI: (supports S0 S3 S4 S5)
Aug 17 07:55:24 msb01 kernel: Freeing unused kernel memory: 176k freed
Aug 17 07:55:24 msb01 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Aug 17 07:55:24 msb01 kernel: 8139too Fast Ethernet driver 0.9.27
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 07:55:24 msb01 kernel: eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:3d:04:48, IRQ 193
Aug 17 07:55:24 msb01 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Aug 17 07:55:24 msb01 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 17 07:55:24 msb01 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 17 07:55:24 msb01 kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 07:55:24 msb01 kernel: ATIIXP: chipset revision 0
Aug 17 07:55:24 msb01 kernel: ATIIXP: not 100%% native mode: will probe irqs later
Aug 17 07:55:24 msb01 kernel: ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
Aug 17 07:55:24 msb01 kernel: ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Aug 17 07:55:24 msb01 kernel: usbcore: registered new driver usbfs
Aug 17 07:55:24 msb01 kernel: usbcore: registered new driver hub
Aug 17 07:55:24 msb01 kernel: hda: TOSHIBA MK1031GAS, ATA DISK drive
Aug 17 07:55:24 msb01 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 17 07:55:24 msb01 kernel: hdc: DV-W28E, ATAPI CD/DVD-ROM drive
Aug 17 07:55:24 msb01 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 07:55:24 msb01 kernel: ehci_hcd 0000:00:13.2: EHCI Host Controller
Aug 17 07:55:24 msb01 kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
Aug 17 07:55:24 msb01 kernel: ehci_hcd 0000:00:13.2: irq 193, io mem 0xe8003000
Aug 17 07:55:24 msb01 kernel: ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 17 07:55:24 msb01 kernel: usb usb1: configuration #1 chosen from 1 choice
Aug 17 07:55:24 msb01 kernel: hub 1-0:1.0: USB hub found
Aug 17 07:55:24 msb01 kernel: hub 1-0:1.0: 6 ports detected
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.0: irq 193, io mem 0xe8001000
Aug 17 07:55:24 msb01 kernel: usb usb2: configuration #1 chosen from 1 choice
Aug 17 07:55:24 msb01 kernel: hub 2-0:1.0: USB hub found
Aug 17 07:55:24 msb01 kernel: hub 2-0:1.0: 3 ports detected
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
Aug 17 07:55:24 msb01 kernel: ohci_hcd 0000:00:13.1: irq 193, io mem 0xe8002000
Aug 17 07:55:24 msb01 kernel: usb usb3: configuration #1 chosen from 1 choice
Aug 17 07:55:24 msb01 kernel: hub 3-0:1.0: USB hub found
Aug 17 07:55:24 msb01 kernel: hub 3-0:1.0: 3 ports detected
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 07:55:24 msb01 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e8210000-e82107ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 17 07:55:24 msb01 kernel: hda: max request size: 512KiB
Aug 17 07:55:24 msb01 kernel: hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2193kB Cache, UDMA(33)
Aug 17 07:55:24 msb01 kernel: Uniform CD-ROM driver Revision: 3.20
Aug 17 07:55:24 msb01 kernel: hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
Aug 17 07:55:24 msb01 kernel: hda: cache flushes supported
Aug 17 07:55:24 msb01 kernel: hda: hda1 hda2 < hda5 hda6 >
Aug 17 07:55:24 msb01 kernel: usb 2-2: new low speed USB device using ohci_hcd and address 2
Aug 17 07:55:24 msb01 kernel: usb 2-2: configuration #1 chosen from 1 choice
Aug 17 07:55:24 msb01 kernel: usbcore: registered new driver hiddev
Aug 17 07:55:24 msb01 kernel: input: Logitech USB Receiver as /class/input/input1
Aug 17 07:55:24 msb01 kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2
Aug 17 07:55:24 msb01 kernel: usbcore: registered new driver usbhid
Aug 17 07:55:24 msb01 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 17 07:55:24 msb01 kernel: Attempting manual resume
Aug 17 07:55:24 msb01 kernel: ReiserFS: hda6: found reiserfs format "3.6" with standard journal
Aug 17 07:55:24 msb01 kernel: ReiserFS: hda6: using ordered data mode
Aug 17 07:55:24 msb01 kernel: ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 17 07:55:24 msb01 kernel: ReiserFS: hda6: checking transaction log (hda6)
Aug 17 07:55:24 msb01 kernel: ReiserFS: hda6: Using r5 hash to sort names
Aug 17 07:55:24 msb01 kernel: Real Time Clock Driver v1.12ac
Aug 17 07:55:24 msb01 kernel: eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Aug 17 07:55:24 msb01 kernel: mice: PS/2 mouse device common for all mice
Aug 17 07:55:24 msb01 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 17 07:55:24 msb01 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 17 07:55:24 msb01 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Aug 17 07:55:24 msb01 kernel: agpgart: Detected Ati IGP9100/M chipset
Aug 17 07:55:24 msb01 kernel: agpgart: AGP aperture is 64M @ 0xec000000
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 07:55:24 msb01 kernel: Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
Aug 17 07:55:24 msb01 kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Aug 17 07:55:24 msb01 kernel: Yenta: Routing CardBus interrupts to PCI
Aug 17 07:55:24 msb01 kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
Aug 17 07:55:24 msb01 kernel: ath_hal: module license 'Proprietary' taints kernel.
Aug 17 07:55:24 msb01 kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
Aug 17 07:55:24 msb01 kernel: wlan: 0.8.4.2 (svn r1644)
Aug 17 07:55:24 msb01 kernel: ath_rate_sample: 1.2 (svn r1644)
Aug 17 07:55:24 msb01 kernel: ath_pci: 0.9.4.5 (svn r1644)
Aug 17 07:55:24 msb01 kernel: ts: Compaq touchscreen protocol output
Aug 17 07:55:24 msb01 kernel: Yenta: ISA IRQ mask 0x0a68, PCI irq 177
Aug 17 07:55:24 msb01 kernel: Socket status: 30000006
Aug 17 07:55:24 msb01 kernel: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0xa000-0xafff: clean.
Aug 17 07:55:24 msb01 kernel: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
Aug 17 07:55:24 msb01 kernel: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
Aug 17 07:55:24 msb01 kernel: input: PS/2 Mouse as /class/input/input2
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 201
Aug 17 07:55:24 msb01 kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Aug 17 07:55:24 msb01 kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Aug 17 07:55:24 msb01 kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Aug 17 07:55:24 msb01 kernel: wifi0: H/W encryption support: WEP AES AES_CCM TKIP
Aug 17 07:55:24 msb01 kernel: wifi0: mac 5.9 phy 4.3 radio 4.6
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 8 for CAB traffic
Aug 17 07:55:24 msb01 kernel: wifi0: Use hw queue 9 for beacons
Aug 17 07:55:24 msb01 kernel: input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
Aug 17 07:55:24 msb01 kernel: input: PC Speaker as /class/input/input4
Aug 17 07:55:24 msb01 kernel: wifi0: Atheros 5212: mem=0xe8200000, irq=201
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 07:55:24 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0x100-0x3af: clean.
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0x3e0-0x4ff: clean.
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0x820-0x8ff: clean.
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
Aug 17 07:55:24 msb01 kernel: cs: IO port probe 0xa00-0xaff: clean.
Aug 17 07:55:24 msb01 kernel: Adding 3132632k swap on /dev/hda5. Priority:-1 extents:1 across:3132632k
Aug 17 07:55:24 msb01 kernel: SCSI subsystem initialized
Aug 17 07:55:24 msb01 kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
Aug 17 07:55:24 msb01 kernel: ieee1394: sbp2: Try serialize_io=0 for better performance
Aug 17 07:55:24 msb01 kernel: device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
Aug 17 07:55:24 msb01 kernel: pcmcia: Detected deprecated PCMCIA ioctl usage.
Aug 17 07:55:24 msb01 kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Aug 17 07:55:24 msb01 kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Aug 17 07:55:24 msb01 kernel: eth0: link up, 10Mbps, half-duplex, lpa 0x0000
Aug 17 07:55:25 msb01 kernel: NET: Registered protocol family 10
Aug 17 07:55:25 msb01 kernel: lo: Disabled Privacy Extensions
Aug 17 07:55:25 msb01 kernel: IPv6 over IPv4 tunneling driver
Aug 17 07:55:26 msb01 kernel: ACPI: Battery Slot [BAT1] (battery present)
Aug 17 07:55:26 msb01 kernel: ACPI: AC Adapter [ACAD] (off-line)
Aug 17 07:55:26 msb01 kernel: ACPI: Power Button (FF) [PWRF]
Aug 17 07:55:26 msb01 kernel: ACPI: Lid Switch [LID]
Aug 17 07:55:26 msb01 kernel: ACPI: Power Button (CM) [PWRB]
Aug 17 07:55:27 msb01 kernel: apm: BIOS not found.
Aug 17 07:55:27 msb01 kernel: lp: driver loaded but no devices found
Aug 17 07:55:27 msb01 kernel: ppdev: user-space parallel port driver
Aug 17 07:55:56 msb01 kernel: [drm] Initialized drm 1.0.1 20051102
Aug 17 07:55:56 msb01 kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 07:55:56 msb01 kernel: [drm] Initialized radeon 1.22.0 20051229 on minor 0
Aug 17 07:55:57 msb01 kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Aug 17 07:55:57 msb01 kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
Aug 17 07:55:57 msb01 kernel: agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode
Aug 17 07:55:58 msb01 kernel: [drm] Loading R300 Microcode
Aug 17 07:56:28 msb01 kernel: psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
Aug 17 07:56:28 msb01 kernel: psmouse.c: resync failed, issuing reconnect request
Aug 17 07:56:59 msb01 kernel: ACPI Error (psargs-0353): [PBST] Namespace lookup failure, AE_NOT_FOUND
Aug 17 07:56:59 msb01 kernel: ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC0.BAT1._BST] (Node dfba1340), AE_NOT_FOUND
Aug 17 07:56:59 msb01 kernel: ACPI Error (psargs-0353): [PBST] Namespace lookup failure, AE_NOT_FOUND
Aug 17 07:56:59 msb01 kernel: ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC0.BAT1._BST] (Node dfba1340), AE_NOT_FOUND
Aug 17 07:57:18 msb01 gconfd (mirto-5852): Inizializzazione (versione 2.14.0), pid 5852, utente 'mirto'
Aug 17 07:57:19 msb01 gconfd (mirto-5852): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una fonte di configurazione in sola lettura in posizione 0
Aug 17 07:57:19 msb01 gconfd (mirto-5852): L'indirizzo "xml:readwrite:/home/mirto/.gconf" è stato risolto ad una fonte di configurazione scrivibile in posizione 1
Aug 17 07:57:19 msb01 gconfd (mirto-5852): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 2
Aug 17 07:57:19 msb01 gconfd (mirto-5852): L'indirizzo "xml:readonly:/var/lib/gconf/debian.defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 3
Aug 17 07:57:19 msb01 gconfd (mirto-5852): L'indirizzo "xml:readonly:/var/lib/gconf/defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 4
Aug 17 07:57:59 msb01 kernel: ACPI Error (psargs-0353): [PBST] Namespace lookup failure, AE_NOT_FOUND
Aug 17 07:57:59 msb01 kernel: ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC0.BAT1._BST] (Node dfba1340), AE_NOT_FOUND
Aug 17 07:58:07 msb01 shutdown[6058]: shutting down for system halt
Aug 17 07:58:08 msb01 gconfd (mirto-5852): Ricevuto segnale 15, arresto regolare
Aug 17 07:58:08 msb01 gconfd (mirto-5852): Uscita
Aug 17 07:58:12 msb01 kernel: apm: BIOS not found.
Aug 17 07:58:20 msb01 kernel: Kernel logging (proc) stopped.
Aug 17 07:58:20 msb01 kernel: Kernel log daemon terminating.
Aug 17 07:58:21 msb01 exiting on signal 15
Aug 17 08:00:29 msb01 syslogd 1.4.1#18: restart.
Aug 17 08:00:29 msb01 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Aug 17 08:00:29 msb01 kernel: Linux version 2.6.16-2-686-smp (Debian 2.6.16-17) (waldi@debian.org) (gcc version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 SMP Sat Jul 15 22:33:00 UTC 2006
Aug 17 08:00:29 msb01 kernel: BIOS-provided physical RAM map:
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Aug 17 08:00:29 msb01 kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Aug 17 08:00:29 msb01 kernel: 0MB HIGHMEM available.
Aug 17 08:00:29 msb01 kernel: 1023MB LOWMEM available.
Aug 17 08:00:29 msb01 kernel: found SMP MP-table at 000f68f0
Aug 17 08:00:29 msb01 kernel: DMI present.
Aug 17 08:00:29 msb01 kernel: ATI board detected. Disabling timer routing over 8254.
Aug 17 08:00:29 msb01 kernel: ACPI: PM-Timer IO Port: 0x8008
Aug 17 08:00:29 msb01 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 17 08:00:29 msb01 kernel: Processor #0 15:4 APIC version 20
Aug 17 08:00:29 msb01 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 17 08:00:29 msb01 kernel: Processor #1 15:4 APIC version 20
Aug 17 08:00:29 msb01 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 17 08:00:29 msb01 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 17 08:00:29 msb01 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 17 08:00:29 msb01 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 17 08:00:29 msb01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Aug 17 08:00:29 msb01 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Aug 17 08:00:29 msb01 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 17 08:00:29 msb01 kernel: More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Aug 17 08:00:29 msb01 kernel: Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Aug 17 08:00:29 msb01 kernel: Using ACPI (MADT) for SMP configuration information
Aug 17 08:00:29 msb01 kernel: Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Aug 17 08:00:29 msb01 kernel: Built 1 zonelists
Aug 17 08:00:29 msb01 kernel: Kernel command line: root=/dev/hda6 ro
Aug 17 08:00:29 msb01 kernel: Enabling fast FPU save and restore... done.
Aug 17 08:00:29 msb01 kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 17 08:00:29 msb01 kernel: Initializing CPU#0
Aug 17 08:00:29 msb01 kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Aug 17 08:00:29 msb01 kernel: Detected 3467.234 MHz processor.
Aug 17 08:00:29 msb01 kernel: Using pmtmr for high-res timesource
Aug 17 08:00:29 msb01 kernel: Console: colour VGA+ 80x25
Aug 17 08:00:29 msb01 kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Aug 17 08:00:29 msb01 kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 17 08:00:29 msb01 kernel: Memory: 1030432k/1048000k available (1505k kernel code, 16920k reserved, 545k data, 176k init, 0k highmem)
Aug 17 08:00:29 msb01 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 17 08:00:29 msb01 kernel: Calibrating delay using timer specific routine.. 6942.96 BogoMIPS (lpj=13885925)
Aug 17 08:00:29 msb01 kernel: Security Framework v1.0.0 initialized
Aug 17 08:00:29 msb01 kernel: SELinux: Disabled at boot.
Aug 17 08:00:29 msb01 kernel: Capability LSM initialized
Aug 17 08:00:29 msb01 kernel: Mount-cache hash table entries: 512
Aug 17 08:00:29 msb01 kernel: monitor/mwait feature present.
Aug 17 08:00:29 msb01 kernel: using mwait in idle threads.
Aug 17 08:00:29 msb01 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Aug 17 08:00:29 msb01 kernel: CPU: L2 cache: 1024K
Aug 17 08:00:29 msb01 kernel: CPU: Physical Processor ID: 0
Aug 17 08:00:29 msb01 kernel: Intel machine check architecture supported.
Aug 17 08:00:29 msb01 kernel: Intel machine check reporting enabled on CPU#0.
Aug 17 08:00:29 msb01 kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Aug 17 08:00:29 msb01 kernel: CPU0: Thermal monitoring enabled
Aug 17 08:00:29 msb01 kernel: Checking 'hlt' instruction... OK.
Aug 17 08:00:29 msb01 kernel: CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Aug 17 08:00:29 msb01 kernel: Booting processor 1/1 eip 3000
Aug 17 08:00:29 msb01 kernel: Initializing CPU#1
Aug 17 08:00:29 msb01 kernel: Calibrating delay using timer specific routine.. 6934.05 BogoMIPS (lpj=13868103)
Aug 17 08:00:29 msb01 kernel: monitor/mwait feature present.
Aug 17 08:00:29 msb01 kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Aug 17 08:00:29 msb01 kernel: CPU: L2 cache: 1024K
Aug 17 08:00:29 msb01 kernel: CPU: Physical Processor ID: 0
Aug 17 08:00:29 msb01 kernel: Intel machine check architecture supported.
Aug 17 08:00:29 msb01 kernel: Intel machine check reporting enabled on CPU#1.
Aug 17 08:00:29 msb01 kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
Aug 17 08:00:29 msb01 kernel: CPU1: Thermal monitoring enabled
Aug 17 08:00:29 msb01 kernel: CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.46GHz stepping 01
Aug 17 08:00:29 msb01 kernel: Total of 2 processors activated (13877.01 BogoMIPS).
Aug 17 08:00:29 msb01 kernel: ENABLING IO-APIC IRQs
Aug 17 08:00:29 msb01 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 17 08:00:29 msb01 kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed.
Aug 17 08:00:29 msb01 kernel: ...trying to set up timer as Virtual Wire IRQ... works.
Aug 17 08:00:29 msb01 kernel: checking TSC synchronization across 2 CPUs: passed.
Aug 17 08:00:29 msb01 kernel: Brought up 2 CPUs
Aug 17 08:00:29 msb01 kernel: migration_cost=4000
Aug 17 08:00:29 msb01 kernel: checking if image is initramfs... it is
Aug 17 08:00:29 msb01 kernel: Freeing initrd memory: 4320k freed
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 16
Aug 17 08:00:29 msb01 kernel: ACPI: bus type pci registered
Aug 17 08:00:29 msb01 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
Aug 17 08:00:29 msb01 kernel: PCI: Using configuration type 1
Aug 17 08:00:29 msb01 kernel: ACPI: Subsystem revision 20060127
Aug 17 08:00:29 msb01 kernel: ACPI: Interpreter enabled
Aug 17 08:00:29 msb01 kernel: ACPI: Using IOAPIC for interrupt routing
Aug 17 08:00:29 msb01 kernel: ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
Aug 17 08:00:29 msb01 last message repeated 3 times
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 17 08:00:29 msb01 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Aug 17 08:00:29 msb01 kernel: PCI: Transparent bridge - 0000:00:14.4
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
Aug 17 08:00:29 msb01 kernel: ACPI: Embedded Controller [EC0] (gpe 6) interrupt mode.
Aug 17 08:00:29 msb01 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 17 08:00:29 msb01 kernel: pnp: PnP ACPI init
Aug 17 08:00:29 msb01 kernel: pnp: PnP ACPI: found 9 devices
Aug 17 08:00:29 msb01 kernel: PnPBIOS: Disabled by ACPI PNP
Aug 17 08:00:29 msb01 kernel: PCI: Using ACPI for IRQ routing
Aug 17 08:00:29 msb01 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 17 08:00:29 msb01 kernel: pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
Aug 17 08:00:29 msb01 kernel: pnp: 00:07: ioport range 0x220-0x22f has been reserved
Aug 17 08:00:29 msb01 kernel: pnp: 00:07: ioport range 0x40b-0x40b has been reserved
Aug 17 08:00:29 msb01 kernel: pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
Aug 17 08:00:29 msb01 kernel: PCI: Bridge: 0000:00:01.0
Aug 17 08:00:29 msb01 kernel: IO window: 9000-9fff
Aug 17 08:00:29 msb01 kernel: MEM window: e8100000-e81fffff
Aug 17 08:00:29 msb01 kernel: PREFETCH window: f0000000-f7ffffff
Aug 17 08:00:29 msb01 kernel: PCI: Bus 3, cardbus bridge: 0000:02:04.0
Aug 17 08:00:29 msb01 kernel: IO window: 0000a800-0000a8ff
Aug 17 08:00:29 msb01 kernel: IO window: 0000ac00-0000acff
Aug 17 08:00:29 msb01 kernel: PREFETCH window: 60000000-61ffffff
Aug 17 08:00:29 msb01 kernel: MEM window: 62000000-63ffffff
Aug 17 08:00:29 msb01 kernel: PCI: Bridge: 0000:00:14.4
Aug 17 08:00:29 msb01 kernel: IO window: a000-afff
Aug 17 08:00:29 msb01 kernel: MEM window: e8200000-e82fffff
Aug 17 08:00:29 msb01 kernel: PREFETCH window: 60000000-61ffffff
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 08:00:29 msb01 kernel: audit: initializing netlink socket (disabled)
Aug 17 08:00:29 msb01 kernel: audit(1155801533.428:1): initialized
Aug 17 08:00:29 msb01 kernel: VFS: Disk quotas dquot_6.5.1
Aug 17 08:00:29 msb01 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 17 08:00:29 msb01 kernel: Initializing Cryptographic API
Aug 17 08:00:29 msb01 kernel: io scheduler noop registered
Aug 17 08:00:29 msb01 kernel: io scheduler anticipatory registered (default)
Aug 17 08:00:29 msb01 kernel: io scheduler deadline registered
Aug 17 08:00:29 msb01 kernel: io scheduler cfq registered
Aug 17 08:00:29 msb01 kernel: isapnp: Scanning for PnP cards...
Aug 17 08:00:29 msb01 kernel: isapnp: No Plug & Play device found
Aug 17 08:00:29 msb01 kernel: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Aug 17 08:00:29 msb01 kernel: i8042.c: Detected active multiplexing controller, rev 1.1.
Aug 17 08:00:29 msb01 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Aug 17 08:00:29 msb01 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Aug 17 08:00:29 msb01 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Aug 17 08:00:29 msb01 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Aug 17 08:00:29 msb01 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 17 08:00:29 msb01 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 08:00:29 msb01 kernel: ACPI: PCI interrupt for device 0000:00:14.6 disabled
Aug 17 08:00:29 msb01 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 2
Aug 17 08:00:29 msb01 kernel: IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 17 08:00:29 msb01 kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 17 08:00:29 msb01 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Aug 17 08:00:29 msb01 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Aug 17 08:00:29 msb01 kernel: TCP reno registered
Aug 17 08:00:29 msb01 kernel: TCP bic registered
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 1
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 17
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 8
Aug 17 08:00:29 msb01 kernel: NET: Registered protocol family 20
Aug 17 08:00:29 msb01 kernel: Using IPI No-Shortcut mode
Aug 17 08:00:29 msb01 kernel: ACPI wakeup devices:
Aug 17 08:00:29 msb01 kernel: ELAN OHC1 OHC2 EHCI MODM
Aug 17 08:00:29 msb01 kernel: ACPI: (supports S0 S3 S4 S5)
Aug 17 08:00:29 msb01 kernel: Freeing unused kernel memory: 176k freed
Aug 17 08:00:29 msb01 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Aug 17 08:00:29 msb01 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 17 08:00:29 msb01 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 17 08:00:29 msb01 kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 08:00:29 msb01 kernel: ATIIXP: chipset revision 0
Aug 17 08:00:29 msb01 kernel: ATIIXP: not 100%% native mode: will probe irqs later
Aug 17 08:00:29 msb01 kernel: ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
Aug 17 08:00:29 msb01 kernel: ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Aug 17 08:00:29 msb01 kernel: usbcore: registered new driver usbfs
Aug 17 08:00:29 msb01 kernel: usbcore: registered new driver hub
Aug 17 08:00:29 msb01 kernel: 8139too Fast Ethernet driver 0.9.27
Aug 17 08:00:29 msb01 kernel: hda: TOSHIBA MK1031GAS, ATA DISK drive
Aug 17 08:00:29 msb01 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 17 08:00:29 msb01 kernel: hdc: DV-W28E, ATAPI CD/DVD-ROM drive
Aug 17 08:00:29 msb01 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.0: OHCI Host Controller
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.0: irq 193, io mem 0xe8001000
Aug 17 08:00:29 msb01 kernel: usb usb1: configuration #1 chosen from 1 choice
Aug 17 08:00:29 msb01 kernel: hub 1-0:1.0: USB hub found
Aug 17 08:00:29 msb01 kernel: hub 1-0:1.0: 3 ports detected
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.1: OHCI Host Controller
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
Aug 17 08:00:29 msb01 kernel: ohci_hcd 0000:00:13.1: irq 193, io mem 0xe8002000
Aug 17 08:00:29 msb01 kernel: usb usb2: configuration #1 chosen from 1 choice
Aug 17 08:00:29 msb01 kernel: hub 2-0:1.0: USB hub found
Aug 17 08:00:29 msb01 kernel: hub 2-0:1.0: 3 ports detected
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 08:00:29 msb01 kernel: ehci_hcd 0000:00:13.2: EHCI Host Controller
Aug 17 08:00:29 msb01 kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
Aug 17 08:00:29 msb01 kernel: ehci_hcd 0000:00:13.2: irq 193, io mem 0xe8003000
Aug 17 08:00:29 msb01 kernel: ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 17 08:00:29 msb01 kernel: usb usb3: configuration #1 chosen from 1 choice
Aug 17 08:00:29 msb01 kernel: hub 3-0:1.0: USB hub found
Aug 17 08:00:29 msb01 kernel: hub 3-0:1.0: 6 ports detected
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 08:00:29 msb01 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e8210000-e82107ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 193
Aug 17 08:00:29 msb01 kernel: eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:3d:04:48, IRQ 193
Aug 17 08:00:29 msb01 kernel: 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Aug 17 08:00:29 msb01 kernel: hda: max request size: 512KiB
Aug 17 08:00:29 msb01 kernel: hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
Aug 17 08:00:29 msb01 kernel: hda: cache flushes supported
Aug 17 08:00:29 msb01 kernel: hda: hda1 hda2 < hda5 hda6 >
Aug 17 08:00:29 msb01 kernel: hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2193kB Cache, UDMA(33)
Aug 17 08:00:29 msb01 kernel: Uniform CD-ROM driver Revision: 3.20
Aug 17 08:00:29 msb01 kernel: Attempting manual resume
Aug 17 08:00:29 msb01 kernel: ReiserFS: hda6: found reiserfs format "3.6" with standard journal
Aug 17 08:00:29 msb01 kernel: usb 1-2: new low speed USB device using ohci_hcd and address 3
Aug 17 08:00:29 msb01 kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 17 08:00:29 msb01 kernel: usbcore: registered new driver hiddev
Aug 17 08:00:29 msb01 kernel: input: Logitech USB Receiver as /class/input/input1
Aug 17 08:00:29 msb01 kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2
Aug 17 08:00:29 msb01 kernel: usbcore: registered new driver usbhid
Aug 17 08:00:29 msb01 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 17 08:00:29 msb01 kernel: ReiserFS: hda6: using ordered data mode
Aug 17 08:00:29 msb01 kernel: ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 17 08:00:29 msb01 kernel: ReiserFS: hda6: checking transaction log (hda6)
Aug 17 08:00:29 msb01 kernel: ReiserFS: hda6: Using r5 hash to sort names
Aug 17 08:00:29 msb01 kernel: input: PC Speaker as /class/input/input2
Aug 17 08:00:29 msb01 kernel: Real Time Clock Driver v1.12ac
Aug 17 08:00:29 msb01 kernel: eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Aug 17 08:00:29 msb01 kernel: mice: PS/2 mouse device common for all mice
Aug 17 08:00:29 msb01 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Aug 17 08:00:29 msb01 kernel: agpgart: Detected Ati IGP9100/M chipset
Aug 17 08:00:29 msb01 kernel: agpgart: AGP aperture is 64M @ 0xec000000
Aug 17 08:00:29 msb01 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 17 08:00:29 msb01 kernel: ts: Compaq touchscreen protocol output
Aug 17 08:00:29 msb01 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 17 08:00:29 msb01 kernel: ath_hal: module license 'Proprietary' taints kernel.
Aug 17 08:00:29 msb01 kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
Aug 17 08:00:29 msb01 kernel: wlan: 0.8.4.2 (svn r1644)
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 08:00:29 msb01 kernel: Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
Aug 17 08:00:29 msb01 kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Aug 17 08:00:29 msb01 kernel: Yenta: Routing CardBus interrupts to PCI
Aug 17 08:00:29 msb01 kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
Aug 17 08:00:29 msb01 kernel: ath_rate_sample: 1.2 (svn r1644)
Aug 17 08:00:29 msb01 kernel: ath_pci: 0.9.4.5 (svn r1644)
Aug 17 08:00:29 msb01 kernel: input: PS/2 Mouse as /class/input/input3
Aug 17 08:00:29 msb01 kernel: input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
Aug 17 08:00:29 msb01 kernel: Yenta: ISA IRQ mask 0x0a78, PCI irq 177
Aug 17 08:00:29 msb01 kernel: Socket status: 30000006
Aug 17 08:00:29 msb01 kernel: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0xa000-0xafff: clean.
Aug 17 08:00:29 msb01 kernel: pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
Aug 17 08:00:29 msb01 kernel: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x61ffffff
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 201
Aug 17 08:00:29 msb01 kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Aug 17 08:00:29 msb01 kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Aug 17 08:00:29 msb01 kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Aug 17 08:00:29 msb01 kernel: wifi0: H/W encryption support: WEP AES AES_CCM TKIP
Aug 17 08:00:29 msb01 kernel: wifi0: mac 5.9 phy 4.3 radio 4.6
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 8 for CAB traffic
Aug 17 08:00:29 msb01 kernel: wifi0: Use hw queue 9 for beacons
Aug 17 08:00:29 msb01 kernel: wifi0: Atheros 5212: mem=0xe8200000, irq=201
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 08:00:29 msb01 kernel: ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0x100-0x3af: clean.
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0x3e0-0x4ff: clean.
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0x820-0x8ff: clean.
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
Aug 17 08:00:29 msb01 kernel: cs: IO port probe 0xa00-0xaff: clean.
Aug 17 08:00:29 msb01 kernel: Adding 3132632k swap on /dev/hda5. Priority:-1 extents:1 across:3132632k
Aug 17 08:00:29 msb01 kernel: SCSI subsystem initialized
Aug 17 08:00:29 msb01 kernel: ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
Aug 17 08:00:29 msb01 kernel: ieee1394: sbp2: Try serialize_io=0 for better performance
Aug 17 08:00:29 msb01 kernel: device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
Aug 17 08:00:29 msb01 kernel: pcmcia: Detected deprecated PCMCIA ioctl usage.
Aug 17 08:00:29 msb01 kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Aug 17 08:00:29 msb01 kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Aug 17 08:00:29 msb01 kernel: eth0: link up, 10Mbps, half-duplex, lpa 0x0000
Aug 17 08:00:30 msb01 kernel: NET: Registered protocol family 10
Aug 17 08:00:30 msb01 kernel: lo: Disabled Privacy Extensions
Aug 17 08:00:30 msb01 kernel: IPv6 over IPv4 tunneling driver
Aug 17 08:00:32 msb01 kernel: ACPI: Battery Slot [BAT1] (battery present)
Aug 17 08:00:32 msb01 kernel: ACPI: AC Adapter [ACAD] (on-line)
Aug 17 08:00:32 msb01 kernel: ACPI: Power Button (FF) [PWRF]
Aug 17 08:00:32 msb01 kernel: ACPI: Lid Switch [LID]
Aug 17 08:00:32 msb01 kernel: ACPI: Power Button (CM) [PWRB]
Aug 17 08:00:32 msb01 kernel: apm: BIOS not found.
Aug 17 08:00:33 msb01 kernel: lp: driver loaded but no devices found
Aug 17 08:00:33 msb01 kernel: ppdev: user-space parallel port driver
Aug 17 08:01:01 msb01 kernel: [drm] Initialized drm 1.0.1 20051102
Aug 17 08:01:01 msb01 kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 177
Aug 17 08:01:01 msb01 kernel: [drm] Initialized radeon 1.22.0 20051229 on minor 0
Aug 17 08:01:02 msb01 kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Aug 17 08:01:02 msb01 kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
Aug 17 08:01:02 msb01 kernel: agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x mode
Aug 17 08:01:02 msb01 kernel: [drm] Loading R300 Microcode
Aug 17 08:03:34 msb01 gconfd (mirto-5853): Inizializzazione (versione 2.14.0), pid 5853, utente 'mirto'
Aug 17 08:03:34 msb01 gconfd (mirto-5856): Inizializzazione (versione 2.14.0), pid 5856, utente 'mirto'
Aug 17 08:03:35 msb01 gconfd (mirto-5856): Errore nell'acquisizione del lock sul demone, uscita: Impossibile impostare il lock su '/tmp/gconfd-mirto/lock/ior': probabilmente un altro processo ha il lock, oppure il sistema operativo ha il file locking NFS configurato erroneamente (Resource temporarily unavailable)
Aug 17 08:03:35 msb01 gconfd (mirto-5853): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una fonte di configurazione in sola lettura in posizione 0
Aug 17 08:03:35 msb01 gconfd (mirto-5853): L'indirizzo "xml:readwrite:/home/mirto/.gconf" è stato risolto ad una fonte di configurazione scrivibile in posizione 1
Aug 17 08:03:35 msb01 gconfd (mirto-5853): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 2
Aug 17 08:03:35 msb01 gconfd (mirto-5853): L'indirizzo "xml:readonly:/var/lib/gconf/debian.defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 3
Aug 17 08:03:35 msb01 gconfd (mirto-5853): L'indirizzo "xml:readonly:/var/lib/gconf/defaults" è stato risolta ad una fonte di configurazione in sola lettura in posizione 4
Aug 17 08:08:22 msb01 kernel: psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
Aug 17 08:08:23 msb01 kernel: psmouse.c: resync failed, issuing reconnect request
Aug 17 08:12:24 msb01 syslogd 1.4.1#18: restart.
Aug 17 08:40:28 msb01 -- MARK --
Aug 17 09:00:28 msb01 -- MARK --
Aug 17 09:20:28 msb01 -- MARK --
Aug 17 09:40:28 msb01 -- MARK --
Reply to: