Re: XV Video Output Driver Problem

[gustavo halperin <ggh.develop@gmail.com>]

shell wrote:
> gustavo halperin 写道:
> > Hello
> >
> > I have, apparently, xv support for my trident driver (CyberBlade 
> > XP4m32). But when I run "mplayer -vo xv <movie>" or "xine -V xv 
> > <movie>" I hear the movie but I see a blue screen. With "x11" driver 
> > every think is OK but a little slow. What is the problem? I need to 
> > do some special configuration some where?
> >
> > Thank you,
> > Gustavo
> >
> > BTW: Below I write the output from the 'xvinfo' and some lines from 
> > the "xorg.conf"
> > X-Video Extension version 2.2
> > screen #0
> > Adaptor #0: "Trident Backend Scaler"
> > number of ports: 1
> > port base: 65
> > operations supported: PutImage
> > supported visuals:
> > depth 24, visualID 0x23
> > depth 24, visualID 0x24
> > depth 24, visualID 0x25
> > depth 24, visualID 0x26
> > number of attributes: 5
> > "XV_COLORKEY" (range 0 to 16777215)
> > client settable attribute
> > client gettable attribute (current value is 66046)
> > "XV_SATURATION" (range 0 to 187)
> > client settable attribute
> > client gettable attribute (current value is 80)
> > "XV_BRIGHTNESS" (range 0 to 63)
> > client settable attribute
> > client gettable attribute (current value is 45)
> > "XV_HUE" (range 0 to 360)
> > client settable attribute
> > client gettable attribute (current value is 0)
> > "XV_CONTRAST" (range 0 to 7)
> > client settable attribute
> > client gettable attribute (current value is 4)
> > maximum XvImage size: 1024 x 1024
> > Number of image formats: 3
> > id: 0x36315652 (RV16)
> > guid: 52563136-0000-0000-0000-000000000000
> > bits per pixel: 16
> > number of planes: 1
> > type: RGB (packed)
> > depth: 16
> > red, green, blue masks: 0xf800, 0x7e0, 0x1f
> > id: 0x32315659 (YV12)
> > guid: 59563132-0000-0010-8000-00aa00389b71
> > bits per pixel: 12
> > number of planes: 3
> > type: YUV (planar)
> > id: 0x32595559 (YUY2)
> > guid: 59555932-0000-0010-8000-00aa00389b71
> > bits per pixel: 16
> > number of planes: 1
> > type: YUV (packed)
> >
> >
> > My 'xorg.conf' have the next relevant "Section" for the video:
> > ....
> > Section "Module"
> > Load "GLcore"
> > Load "bitmap"
> > Load "dbe"
> > Load "ddc"
> > Load "dri"
> > Load "extmod"
> > Load "fbdevhw" #Trident use
> > Load "freetype"
> > Load "glx"
> > Load "int10"
> > Load "record"
> > Load "speedo"
> > Load "type1"
> > Load "vbe"
> > Load "synaptics"
> > EndSection
> > Section "Monitor"
> > Identifier "My Monitor"
> > Option "DPMS"
> > HorizSync 28-49
> > VertRefresh 43-72
> > EndSection
> > Section "Screen"
> > Identifier "Default Screen"
> > Device "Generic Video Card"
> > Monitor "My Monitor"
> > DefaultDepth 24
> > SubSection "Display"
> > Depth 1
> > Modes "1024x768" "800x600" "640x480"
> > EndSubSection
> > ...
> > EndSection
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen "Default Screen"
> > InputDevice "Generic Keyboard"
> > InputDevice "TouchPad" "AlwaysCore"
> > InputDevice "Generic Mouse"
> > EndSection
> > Section "DRI"
> > Mode 0666
> > EndSection
> Check libxvl & libxvmcl package.
I have installed "libxvl", this library is also used for mplayer see below:
  / ldd /usr/bin/mplayer |grep  libXv
   libXv.so.1 => /usr/X11R6/lib/libXv.so.1 (0xb6dbb000)/
but the blue screen still there.
About the "libxvmcl"; at this, time the only card-specific library 
provided by this package is  libI810XvMC, for Intel i810-based 
chipsets.  My chipset is the 855PM, so are you sure that I need it ?? 
Any way, I installed to, but the libraries of this packages doesn't look 
be in used by the 'mplayer', see below:
/    ldd /usr/bin/mplayer |grep -i libxv
   libxvidcore.so.4 => /usr/lib/libxvidcore.so.4 (0xb77dc000)
   libXv.so.1 => /usr/X11R6/lib/libXv.so.1 (0xb6e43000)/
Do you see any problem ??

Thank you,
     Gustavo