ALC880 on Etch
Hi all,
I'm trying to get the sound chip on my motherboard to work.
It's an MSI RD480 Neo2 with a ULI M1573 southbridge and a Realtek ALC880
HD Audio chip.
I'm running a fresh install of Etch 386.
I've got no sound, and when I click the gnome volume control icon I get:
"No volume control elements and/or devices found."
When I run alsaconf, I select hda-intel (over legacy isa) and then 'yes'
to modify modprobe.d/sound. The output is:
steel:/home/tcv# alsaconf
Terminating processes: 4140.
Unloading ALSA sound driver modules: snd-hda-intel snd-hda-codec
snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc.
Building card database...
Running update-modules...
Loading driver...
Setting default volumes...
amixer: Mixer default load error: Invalid argument
Saving the mixer setup used for this in /var/lib/alsa/asound.state.
/usr/sbin/alsactl: get_control:149: Cannot read control info
'2,0,0,Front Playback Volume,0': Invalid argument
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
When I shutdown I get a load of "num steps=0
I. amixer: invalid argument" errors (something like that).
I attach a few other diagnostics. If you need anything else to help
work it out please let me know.
TIA
Tom
amixer: Control default snd_hctl_elem_info error: Invalid argument
numid=5,iface=MIXER,name='Headphone Playback Switch'
numid=4,iface=MIXER,name='Surround Playback Switch'
Linux version 2.6.15-1-k7 (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:42:39 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 131024
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126928 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9410
ACPI: RSDT (v001 A M I OEMRSDT 0x12000506 MSFT 0x00000097) @ 0x1ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x12000506 MSFT 0x00000097) @ 0x1ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x12000506 MSFT 0x00000097) @ 0x1ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x12000506 MSFT 0x00000097) @ 0x1ffd03f0
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x1ffd4af0
ACPI: OEMB (v001 A M I AMI_OEM 0x12000506 MSFT 0x00000097) @ 0x1ffde040
ACPI: DSDT (v001 1ACAT 1ACAT000 0x00000000 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
Built 1 zonelists
Kernel command line: root=/dev/mapper/steel-root ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2009.953 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511004k/524096k available (1438k kernel code, 12508k reserved, 540k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4023.45 BogoMIPS (lpj=2011726)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 5196k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-403f claimed by ali7101 ACPI
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:08: ioport range 0xa00-0xa0f has been reserved
pnp: 00:08: ioport range 0x290-0x29f has been reserved
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: dde00000-ddefffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:19.0
IO window: e000-efff
MEM window: ddf00000-ddffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:19.0 to 64
audit: initializing netlink socket (disabled)
audit(1153160431.318:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:02.0 to 64
pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PS2K PS2M AZAL PE2P USB0 USB1 USB2 UB20 PWRB
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 144k freed
input: AT Translated Set 2 keyboard as /class/input/input0
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:02:16.0[A] -> GSI 23 (level, low) -> IRQ 185
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe0836400, 00:16:17:17:d2:b2, IRQ 185
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:14.0[A] -> GSI 22 (level, low) -> IRQ 193
PCI: Via IRQ fixup for 0000:02:14.0, from 7 to 1
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[ddfff800-ddffffff] Max Packet=[2048]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 0000:00:1f.0
ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 201
ALI15X3: chipset revision 199
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 185
ehci_hcd 0000:00:1c.3: EHCI Host Controller
ehci_hcd 0000:00:1c.3: debug port 1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 209
ohci_hcd 0000:00:1c.0: OHCI Host Controller
ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:1c.0: irq 209, io mem 0xddde7000
ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1c.3: irq 185, io mem 0xddde4c00
ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hda: IC35L120AVV207-1, ATA DISK drive
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 217
ohci_hcd 0000:00:1c.1: OHCI Host Controller
ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:1c.1: irq 217, io mem 0xddde6000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 225
ohci_hcd 0000:00:1c.2: OHCI Host Controller
ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:1c.2: irq 225, io mem 0xddde5000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cd04ef]
hdc: LITE-ON DVDRW SHM-165P6S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input1
ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
Real Time Clock Driver v1.12
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
Linux agpgart interface v0.101 (c) Dave Jones
eth1394: $Rev: 1312 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 22 (level, low) -> IRQ 193
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
EXT3 FS on dm-0, internal journal
SCSI subsystem initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
r8169: eth0: link up
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.0 20040925
eth0: no IPv6 routers present
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI Interrupt 0000:00:1d.0[C] -> GSI 22 (level, low) -> IRQ 193
hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x8
hda_codec: num_steps = 0 for NID=0x9
hda_codec: num_steps = 0 for NID=0x9
Module Size Used by
radeon 97120 0
drm 64724 1 radeon
ipv6 222976 13
button 6544 0
ac 4740 0
battery 9476 0
sbp2 21380 0
scsi_mod 126120 1 sbp2
snd_hda_intel 15888 1
snd_hda_codec 79360 1 snd_hda_intel
snd_pcm_oss 46112 0
snd_mixer_oss 16576 2 snd_pcm_oss
snd_pcm 77704 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 21444 1 snd_pcm
snd 48740 6 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
ati_agp 7756 0
eth1394 18696 0
agpgart 31496 2 drm,ati_agp
shpchp 39872 0
pci_hotplug 24884 1 shpchp
rtc 11508 0
i2c_ali1535 6724 0
i2c_ali15x3 7172 0
psmouse 32516 0
i2c_core 19408 2 i2c_ali1535,i2c_ali15x3
soundcore 8992 2 snd
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
serio_raw 6596 0
pcspkr 1732 0
joydev 8960 0
evdev 8896 1
mousedev 10592 1
ext3 118664 3
jbd 48724 1 ext3
mbcache 8516 1 ext3
dm_mirror 18832 0
dm_snapshot 16348 0
dm_mod 51576 5 dm_mirror,dm_snapshot
ide_generic 1216 0 [permanent]
ide_cd 36804 0
cdrom 33568 1 ide_cd
ide_disk 15936 4
generic 4356 0 [permanent]
ohci_hcd 17860 0
ehci_hcd 29064 0
usbcore 113924 3 ohci_hcd,ehci_hcd
alim15x3 10892 0 [permanent]
ide_core 112928 5 ide_generic,ide_cd,ide_disk,generic,alim15x3
ohci1394 30452 0
ieee1394 89208 3 sbp2,eth1394,ohci1394
r8169 25672 0
thermal 13512 0
processor 22976 1 thermal
fan 4676 0
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:1d.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller
00:1e.0 ISA bridge: ALi Corporation PCI to LPC Controller (rev 31)
00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] (rev 80)
01:00.1 Display controller: ATI Technologies Inc RV370 5B64 [FireGL V3100 (PCIE)] (Secondary) (rev 80)
02:14.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
02:16.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0 [M5461 ]: HDA-Intel - HDA ULI M5461
HDA ULI M5461 at 0xdddd0000 irq 193
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
Linux steel 2.6.15-1-k7 #2 Mon Mar 6 15:42:39 UTC 2006 i686 GNU/Linux
Reply to: