Simon, please reply to the list (in case I write something really brilliant...) On Sun, Apr 09, 2006 at 08:27:47AM -0400, Simon Meelich wrote: > sorry for not getting back to you..... > that's good news. i have a ATI Radeon Express 2000 onboard). Right now > my xorg.conf is pretty simple and only configured for one monitor (see > attached file). I tried to get it to work with aticonfig, but I just > couldn't do it. > I got rid of the scrambled picture (it turned out to be a driver > problem). However I can only use one device (either LCD monitor or TV). > If I boot up my PC with the monitor pluged in, then it's the monitor. If > I boot up w/o my monitor pluged in, but with the TV pluged in, I get the > picture on TV. that's sounds like its working properly. Are you trying to get a two headed configuration? Does your card support using both outputs at once? I kinda doubt it, but you'd have to research that. Otherwise, based on what you've described (and without looking at your xorg.conf) I'd say you've got it working properly. A > > thanks again > > simon > > Andrew Sackville-West wrote: > >On Sun, 02 Apr 2006 12:37:45 -0400 > >Simon Meelich <debian@meelich.dyndns.org> wrote: > > > > > >>Hi everyone, > >> > >>does anybody have experience with Debian and TV out and/or MythTV? I'd > >>like to set this up on my newly installed Etch. Unfortunately I can't > >>get the TV out to work properly. The picture is pretty much scrambled.... > >> > >>Any ideas? > >> > > > >what does you're Xorg.conf (or XF86COnfig.4) look like? what video card? > >how is it scrambled? etc etc etc. I"ve got beautiful TV-out from my ASUS > >GeForce video and have also gotten great tv-out from a hauppauge pvr 350, > >so I know its do-able. > > > >A > > > > > >>Thanks > >> > >>Kind regards, > >> > >>Simon Meelich > >> > >> > >>-- > >>To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org > >>with a subject of "unsubscribe". Trouble? Contact > >>listmaster@lists.debian.org > >> > >> > > > # xorg.conf (Xorg X Window System server configuration file) > # > # This file was generated by dexconf, the Debian X Configuration tool, using > # values from the debconf database. > # > # Edit this file with caution, and see the xorg.conf manual page. > # (Type "man xorg.conf" at the shell prompt.) > # > # This file is automatically updated on xserver-xorg package upgrades *only* > # if it has not been modified since the last upgrade of the xserver-xorg > # package. > # > # If you have edited this file but would like it to be automatically updated > # again, run the following commands as root: > # > # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom > # md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum > # dpkg-reconfigure xserver-xorg > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "aticonfig Screen 0" 0 0 > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > Section "Files" > # local font server > # if the local font server has problems, we can fall back on these > FontPath "unix/:7100" > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/CID" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "evdev" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "type1" > Load "vbe" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xorg" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "SyncMaster" > HorizSync 30.0 - 81.0 > VertRefresh 56.0 - 75.0 > Option "DPMS" > EndSection > > Section "Monitor" > Identifier "aticonfig Monitor 0" > EndSection > > Section "Device" > Identifier "ATI Technologies, Inc. Radeon Xpress 200 (RC410)" > Driver "ati" > BusID "PCI:1:5:0" > EndSection > > Section "Device" > Identifier "ATI Graphics Adapter 0" > Driver "fglrx" > BusID "PCI:1:5:0" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "ATI Technologies, Inc. Radeon Xpress 200 (RC410)" > Monitor "SyncMaster" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" > EndSubSection > EndSection > > Section "Screen" > Identifier "aticonfig Screen 0" > Device "ATI Graphics Adapter 0" > Monitor "aticonfig Monitor 0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection > > Section "DRI" > Mode 0666 > EndSection >
Attachment:
signature.asc
Description: Digital signature