Re: Something strange with ip configuration
2006/3/24, Paolo Pantaleo <paolopantaleo@gmail.com>:
> Hi,
> I have a Debian testing. I am experiencing sme problmes with ethernet
> cards ip configurations. My /etc/network/interfaces file is:
>
> ### etherconf DEBCONF AREA. DO NOT EDIT THIS AREA OR INSERT TEXT BEFORE IT.
> auto lo
>
> iface lo inet loopback
>
>
> ### END OF DEBCONF AREA. PLACE YOUR EDITS BELOW; THEY WILL BE PRESERVED.
>
>
> iface eth1 inet static
> address 172.18.255.77
> netmask 255.255.255.0
>
> iface eth0 inet static
> address 172.18.3.51
> netmask 255.255.255.0
> gateway 172.18.3.254
>
> auto eth0
>
> auto eth1
>
> but if I run ip addr I get:
>
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> link/ether 00:0c:6e:91:c4:11 brd ff:ff:ff:ff:ff:ff
> inet 169.254.125.207/16 scope link eth0
> inet 172.18.3.51/24 brd 172.18.3.255 scope global eth0
> inet6 fe80::20c:6eff:fe91:c411/64 scope link
> valid_lft forever preferred_lft forever
> 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
> link/ether 00:0e:e8:8a:20:cd brd ff:ff:ff:ff:ff:ff
> inet 169.254.130.156/16 scope link eth1
> inet 172.18.255.77/24 brd 172.18.255.255 scope global eth1
> inet6 fe80::20e:e8ff:fe8a:20cd/64 scope link
> valid_lft forever preferred_lft forever
> 4: sit0: <NOARP> mtu 1480 qdisc noop
> link/sit 0.0.0.0 brd 0.0.0.0
>
> and ip route:
> 172.18.3.0/24 dev eth0 proto kernel scope link src 172.18.3.51
> 172.18.255.0/24 dev eth1 proto kernel scope link src 172.18.255.77
> 169.254.0.0/16 dev eth0 proto kernel scope link src 169.254.125.207
> 169.254.0.0/16 dev eth1 proto kernel scope link src 169.254.130.156
> default via 172.18.3.254 dev eth0
>
> So where the 169.* addresses can come from?
>
> Thnx
> PAolo
>
>
> --
>
> if you have a minute to spend pleas visit my photogrphy site:
> http://mypic.altervista.org
>
I removed zeroconf and everything was ok, thnx Florian
I have avahi installed, and running, but it seems not to be the guilty
PAolo
--
if you have a minute to spend pleas visit my photogrphy site:
http://mypic.altervista.org
Reply to: