Samba/Proftpd/ncftp all stop at some place.
Hello, everyone:
I have a box running Debian Sarge GNU/Linux.
Hardware: Dual Xeon 2.8G/1G Ram/146G*3 Scsi Raid5 on Megaraid
hardware controller.
Software: Debian Sarge/2.6.8 kernel/Squid/Proftpd/Apache2/ncftp all
debian sarge default version and is updated now.
Config: ip 192.168.9.9
Problem:
1, as a ftp client, ncftp download from other ftp
server(192.168.3.126, windows2003 server with FileZilla server 0.9.10 beta),
to get a large file(about 2.7GB) after get 0.65GB at about 11MB/s then stop,
I can only get message of ncftp like this:
xxx.iso ETA: aaa:aa 0.65/ 2.75GB bbb.bb kB/s =
aaa.aa becomes more and more large; bbb.bb becomes more and more
small.
After aaa.aa is 199:24, and bbb.bb is 184.29, ncftp give a message:
Remote read timed out.
Get xxx.iso: data transfer timed out.
2, as a ftp server(proftpd), I use FlashFXP 2.0 on
windows2003(192.168.3.126) download from this 9.9 box, to get a large
file(about 720MB) after get 184.22MB at about 11MB/s then stop, I can only
get message of FlashFXP like this:
184.22 MB(0.00 KBps) 26% Elapsed 02:48 Remaining: 150:42:17
3, as a samba server, I use windows2003(192.168.3.126) copy three
files from this 9.9 box(1.bin 520MB, 2.bin 708MB, 3.bin 550MB), it seems
windows copy 1.bin first, when 1.bin finished, then 2.bin. The windows copy
progress seems finished 1.bin , but stop at 2.bin, about copied 640MB of
2.bin. After I wait for a while, about 2 minutes, the Windows Explorer give
a message:
Cannot copy 2.bin: The specified network name is no longer
available.
4, as a apache server, I use Windows2003(192.168.3.126)'s IE's "Save
AS..." to download the 1.bin, 2.bin, 3.bin by http from this 9.9 box,
everything id downloaded at 11MB/s or so, no error happened!
I can download/upload from/to the windows2003(192.168.3.126) at
other places no error.
I tried these several times, almost every time the same error.
Thank you for reading my problem, and hope I can get your help.
Many thanks and best regards.
----
Yours: xuelu (-;
Reply to: