Re: ITE 8212 INSTALL
On Mon, 13 Mar 2006 11:54, Andrew Sackville-West wrote:
> On Fri, 10 Mar 2006 22:37:42 -0600
>
> "Forrest Fuqua | JRWR | Woody" <jrwr00@gmail.com> wrote:
> > im trying to install debian on a hardrive that is on a ite 8212 card
> > in IDE/ATAPI mode, so far ive had no luck at all, i whant to install
> > debian testing if i can, (with the linux26)
>
> ite 821x modules are in the 2.6.14 or later kernel. you need an installer
> with that kernel. how you get that is another matter. You might have to
> roll your own.
>
> or do what I did. install the bare minimum sarge on an extra disk using a
> recognised interface. then upgrade that bare-minimum install to a 2.6.14
> kernel (sid/unstable I believe, I don't think its in etch, others will
> pipe-up I'm sure). then you cann see, partition and format the ite drives
> and move your installation over there.
>
> or you could install through a recognized interface and upgrade as
> before, then just unplug and replug your disk into the other interface.
> make sure you handle your boot manager properly first though.
>
> A
2.6.15 is now in testing (aka etch).
Try the one of the etch_di_beta2 or daily_builds cds from
http://cdimage.debian.org/cdimage/
hth
Andrew
Etch now includes
>
> > --
Reply to: