Re: Sarge and RAID
Got this solved, it helps if I load the modules for my SATA disks
first!!
Apologies for the posts.
On Sat, 18 Feb 2006 23:17:01 +0000, "Sion Dafydd" <sion@siondafydd.net>
said:
> Hi!
>
> I've successfully got Sarge and RAID working when using the following
> configuration: boot, swap and root partition as seperate RAID1
> partitions, plus a large partition also as RAID1, all these partitions
> are mirrored on two 250 GB drives. I get no problem with this
> configuration.
>
> I've come into posesion of a spare 40 GB drive which I want to use to
> hold the boot, swap and root partitions, while the two 250GB disks
> mirror one large partition. Well, for some reason using this
> configuration /dev/md0 does not get initilaized on boot. When I try to
> mount it manually I get a "mount: /dev/md0: can't read superblock"
> error. If I run "/etc/init.d/mdadm-raid start" from the command line the
> raid array gets initilaized and everything is fine. Anybody know of a
> reason/fix for this?
>
> Regards,
>
> Sion Dafydd
Reply to: