Re: 2.6 kernel on PowerEdge 1850?
FWIW OpenIPMI with ipmitools is working with kernel 2.6.15, and the new
megaraid driver works with the Perc 4e/Si, so it seems that I have
achieved my objectives.
Jonathan Dill wrote:
I stand corrected, it is Debian Sarge. Experimentally, I have pulled
in linux-image-2.6.15-1-686-smp from Debian Etch with its dependent
packages, rebooted, and that kernel finds the Perc 4e/Si. There were
a bunch of errors about udev during boot up which were not captured in
"dmesg" or the other system logs, I will follow up on those errors.
The "udev" errors were cleared up by having "testing" repository
enabled, and then:
apt-get install yaird
apt-get remove initramfs-tools
dpkg-reconfigure linux-image-`uname -r`
as described in this forum:
http://www.linuxforums.org/forum/debian-linux-help/55215-udev-errors-sid-wake-lan-problems-2-6-15-a.html
--
Jonathan Dill - The NERDS Group
Network Engineering & Resource Development Specialists, LLC
Cell: (240) 994-0012 Main: (301) 622-7995
Web: http://www.nerds.net
Reply to: